Canon S100- Manuals

5 Windows Supports the Adobe PhotoDeluxe Photo Retouching Program • Starts this photo-retouching program to edit and apply special effects to your images. Adobe PhotoDeluxe Home Edition can be installed from the AdobePhotoDeluxe CD-ROM. Starts Your E-mail Program • Starts your e-mail program and pre...

6 System Requirements The following system requirements must be met to install and operate the software. = Computer Model IBM PC/AT compatible = OS Windows 95, Windows 98 (Including the Second Edition),Windows NT 4.0 (Service Pack 3 or higher required) orWindows 2000 = CPU Pentium 133 MHz or better ...

7 Windows Installing/Uninstalling the Software Installing from the Canon Digital Camera Solution Disk If you are installing the software onto Windows NT 4.0 or Windows 2000, you mustfirst log on as the administrator and then install the software. 1. Close any programs that are running. 2. Place the ...

8 Installing from the Adobe PhotoDeluxe CD-ROM For installation instructions, place the Adobe PhotoDeluxe CD-ROM in the drive and click[ReadMe & Guide] and [Install Guide] in the window that displays. The serial number shown during installation will be required for the userregistration process. ...

9 Windows Connecting the Camera to a Computer Selecting a Connection Method The following different interfaces and methods can be used to connect the camera to acomputer. Once a connection has been established using one of the methods, you canstart the software and begin to load the camera images ( ...

10 Serial Port (COM Port) ( ➜ p. 20) The serial interface is supported by the PowerShot S10 and PowerShot S20 models only. Serial Cable Connector Shapes Camera End Computer End Computer Serial Port The serial portis marked withthis symbol.

11 Windows Connecting to a USB Port Requirements for the USB Interface • The USB interface can only be used to connect the camera to computers with Windows 98 or Windows 2000 preinstalled (clean installation). The USB ports oncomputers running versions of Windows 98 or Windows 2000 upgraded fromWind...

12 1. Attach the supplied USB cable to a USB port directly on the computerand to the DIGITAL terminal on the camera as shown below. • There is no need to turn the camera or computer power off when attaching or detaching the USB cables. • Please consult your computer’s manual for the location of the ...

13 Windows Installing the USB Driver (Preinstalled Windows 98/2000 Systems Only) Notes Regarding Installation • The USB driver only needs to be installed the first time the camera is connected via the USB interface. Installation is not required from the second time onward. • Do not cancel the instal...

14 3. Select [Search for the best driver for your device (recommended)] andclick the [Next] button. The dialog will change to the one that allows you to specify the search location. 4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive. 5. Confirm that the [CD-ROM drive] option is sele...

16 Installing the USB Driver into Windows 2000 Begin by logging onto the computer as the Administrator and then install the USBdriver. 1. Once you have attached the USB cable to the camera and computer, setthe camera to the mode for communicating with a computer. ( ➜ p. 12) • PowerShot S100 DIGITAL ...

18 8. Click [No to All] if the “Confirm File Replace” dialog displays. 9. Read the dialog and click the [Finish] button. An event dialog for your camera model will display to allow you to selectapplication programs. ( ➜ p. 21, Step 2 or p. 41, Step 2.) • If a dialog prompts you to restart your compu...

19 Windows Connecting via a CF Card Reader or PC Card Slot To load images directly from a CF card to a computer, eject the card from the camera,place it in a separately sold PC card adapter (PCMCIA card adapter) and insert theassembly into the PC card slot. The adapter is not required if your comput...

21 Windows From Loading to Printing This section provides a simple explanation of the procedures for using ZoomBrowser EXto load and print images. Please refer to the ZoomBrowser EX Help file for more details. What to Do if the “Caution! Connection Time” Dialog Displays • If approximately five minut...

22 How to Have ZoomBrowser EX Start Automatically • If you want ZoomBrowser EX to start automatically without first displaying the event dialog, use the procedures below to change the settings.1. Open the [My Computer] window while the camera is connected to the computer via the USB interface. 2. Op...

23 Windows Serial Interface 1. Attach the camera to the computer with the serial cable. ( ➜ p. 20) 2. Turn the camera’s mode dial to the position. 3. Start ZoomBrowser EX. Double-click the [Canon ZoomBrowser EX] icon on the desktop to start the program. If the [Canon ZoomBrowser EX] icon does not ap...

24 The ZoomBrowser EX Camera Window The Camera Window will open when a connection to a camera or CF card is initiated.Thumbnail (small) images will display. SETUP OPTIONS Button Sets various camerasettings (see inset below)using the computer. How to Check and Change Various Camera Settings • You can...

25 Windows Loading and Saving Images from the Camera 1. Create a new folder in which to save the images from the camera. In the Tree View, right-click the [Image Library One] folder, select [New Folder] fromthe pop-up menu and input a folder name. 2. Select the new folder in the Tree View. 3. Select...

27 Windows Printing Images 1. Select the image(s) you wish to print and click the [PRINT] button. The PhotoRecord printing utility will start and automatically display the selectedimage(s) in a page layout. 2. Adjust the print settings if you wish to change the page layout. Please refer to page 37 o...

28 Basic Procedures for Using ZoomBrowser EX This section provides a simple explanation of the basic procedures for using ZoomBrowserEX. Please refer to the ZoomBrowser EX Help file for more details. Displaying Images Zooming Images In and Out (a) Double-Clicking the Browser Display Area Double-clic...

29 Windows Zooming a Single Image Double-click an image in the Browser Display Area to display it in the Image Viewer. Double-click the target image. Edit Panel Button About the Image Viewer Edit Panel • The edit panel displays when you click Edit Panel button in the Image Viewer. CROP Button Drag t...

30 Displaying Images in Chronological Order Select a folder or some images, click the [View] menu and select [TimeTunnel]. Theselected image(s) will display in a time tunnel. Please refer to the TimeTunnel Help filefor more details on how to operate this function. Showing Images in a Slide Show The ...

32 Organizing Images Changing the File Location You can move an image file by dragging and dropping it onto another folder icon. The [Image Library One] folder is located within the folder in which ZoomBrowser EXwas installed. The Tree View displays files at levels below this folder. Adding a New Li...

33 Windows Erasing Images An image cannot be recovered after it is erased. Double-check to make sure youhave the right images before erasing. Erasing Images Singly 1. Select the target image in the Browser Display Area and click the [DELETE]button. A confirmation dialog will display. 2. Check the im...

34 Saving Computer Images to a CF Card in the Camera 1. Open the Camera Window. ( ➜ pp. 21-23) 2. Click the [UPLOAD] button in the Camera Window. The “Upload Images from Disk” dialog will display. 3. Select the images from the computer and click the [Open] button. The “Save to Camera” dialog will di...

35 Windows Stitching Panoramas Together with PhotoStitch To Merge Images Registered in ZoomBrowser EX • You can merge a series of overlapping images into a single, seamless panorama.• Select the images in the browser area, click the [Edit] menu and select [PhotoStitch]. The PhotoStitch program will ...

36 Editing and Applying Special Effects to Images 1. Confirm that the Adobe PhotoDeluxe Home Edition program has beeninstalled. 2. Select an image from the Browser Display Area of ZoomBrowser EX. 3. Click the [Edit] menu and select [Edit Image using Adobe PhotoDeluxeHome Edition] Please refer to the...

37 Windows Printing Images • Select a folder or image(s) for printing from the Browser Display Area or Camera Window and click the [PRINT] button to start the PhotoRecord program. • You can also click the button while an image is displayed in a slide show to add a print mark to it. When the slide sh...

38 Image Resizing Mode Image Rotating Mode Drag an arrow toresize the image. The arrows displaywhen the mouse ispositioned overthe image. Click this to change torotating mode. Click thisto displaya pop-upmenu. Drag an arrow torotate the image. Click this to changeto image resizingmode. Click thisto ...

40 Backing Up Data You are recommended to use the following procedures to back up your image data afteryou add, delete or change images from ZoomBrowser EX. 1. Click the ZoomBrowser EX [File] menu and select [Backup Database]. 2. Input a file name and click [Save]. The current database file will be ...

41 Windows Loading Images with TWAIN-CompliantApplication Programs (Adobe PhotoDeluxe,Adobe Photoshop, etc.) This section explains how to load images with TWAIN-compliant application programsusing Adobe PhotoDeluxe Home Edition as an example. Please refer to the manual foreach application program fo...

42 Serial Interface 1. Attach the camera to the computer with the serial cable. ( ➜ p. 20) 2. Turn the camera’s mode dial to the position. 3. Start Adobe PhotoDeluxe Home Edition. 4. Click [Get & Fix Photo] at the upper left of the window. 5. Click [Get Photo] from the icons that display and sel...

43 Windows Loading the Camera Images 1. Click the [Camera] button. To load images directly from a CF card outside the camera, click the [My Computer]button instead. The images from the camera or CF card will display in thethumbnail display area. 2. Select the images you wish to download and click th...

44 Troubleshooting the USB Driver Installation Check This First 1. Is the camera connected to the computer correctly? ( ➜ p. 12) 2. Is the camera power on? • PowerShot S100 DIGITAL ELPH/DIGITAL IXUS Slide the mode switch to and press the main switch to power up the camera. • PowerShot S10/S20 Turn t...

47 Windows Your camera model namewill appear here. What to Do if Your Camera Model Appears in the “Scannersand Cameras Properties” Device List 1. Select the name of your camera model and click the [Remove] button. 2. Click [OK] to close the “Scanners and Cameras Properties” dialog. 3. Delete the [Dr...

51 Macintosh Introducing the Software ............................................................ 52 System Requirements ................................................................. 54 Installing/Uninstalling the Software .......................................... 55 Connecting the Camera to a...

53 Windows Macintosh Supports the Adobe PhotoDeluxe Photo Retouching Program • Starts this photo-retouching program to edit and apply special effects to your images. Adobe PhotoDeluxe can be installed from the Adobe PhotoDeluxe CD-ROM. Adjusting Images for Transmission by E-mail • Reduces the image ...

62 Connecting to a Serial Port (Printer or Modem Port) The serial port interface is only supported by the PowerShot S10 and PowerShot S20models. 1. Shut down the computer and turn the camera power off. 2. Attach the supplied serial cable to a serial port on the computer and tothe camera’s DIGITAL te...

63 Windows Macintosh From Loading to Printing This section provides a simple explanation of the procedures for using ImageBrowser toload and print images. Please refer to the ImageBrowser Help file for more details. What to Do if a Warning Dialog Displays • If approximately five minutes pass without...

64 How to Set ImageBrowser to Not Start Automatically 1. Open the Apple menu and select [Control Panels] and [Canon USB Camera]. The “Settings for USB Connection” dialog will display. 2. Click the [The application program below will start.] option to clear the check mark.3. Click the close box at th...

66 The ImageBrowser Camera Window The Camera Window will open when a connection to a camera or CF card is initiated.Thumbnail (small) images will display. How to Check and Change Various Camera Settings • You can adjust the date, time and owner settings in the “Camera Settings” dialog using the comp...

69 Windows Macintosh Printing Images 1. Select the image(s) you wish to print and click the [PRINT] button. The Print window will display with the images arranged in an auto layout. 2. Adjust the print settings if you wish to change the page layout. 3. Click the [PRINT] button in the Print window. P...

70 Basic Procedures for Using ImageBrowser This section provides a simple explanation of the basic procedures for usingImageBrowser. Please refer to the ImageBrowser Help file for more details. Displaying Images Zooming Images In and Out You can zoom images in and out by clicking the (REDUCE) or (EN...

72 Organizing Images Changing the File Location You can move an image file or folder by dragging and dropping it in another location. (a) Drag and drop images from the Browser Window to another folder in the Explorer View Section. (b) Drag and Drop a Folder within the Explorer View Section Refreshin...

73 Windows Macintosh Erasing Images Erasing Images Singly Select the target image in the Browser Widnow and click the [SEND TO TRASH]button. Erasing Images by Folder 1. Click the target folder in the Explorer View Section. The images in the folder will display in the Browser Window. 2. Click the [SE...

75 Windows Macintosh Stitching Panoramas Together with PhotoStitch To Merge Images Registered in ImageBrowser • You can merge a series of overlapping images into a single, seamless panorama.• Select the images in the browser area, choose the [Edit] menu and select [PhotoStitch]. The PhotoStitch prog...

76 Editing and Applying Special Effects to Images 1. Confirm that the Adobe PhotoDeluxe program has been installed. 2. Select an image from the Browser Window of ImageBrowser. 3. Click the [Edit] menu and select [Adobe PhotoDeluxe]. Please refer to the Adobe PhotoDeluxe Help file and electronic guid...

78 What to Do if the “ImageBrowser not found” Dialog Appears If you install only the Canon Digital Camera Plug-In Module without ImageBrowser,the “ImageBrowser not found” dialog may display. If this happens, use the followingprocedures to prevent ImageBrowser from attempting to start automatically. ...

79 Windows Macintosh Starting the Plug-In Module 1. Click the [Get Photo] button at the upper left of the window. 2. Click [Get Photo] from the tab that displays and select [Cameras]. 3. In the “Select Input Source” dialog, select [Canon Didital Camera] andclick the [OK] button. These three steps ar...

80 Settings Buttons Use these buttonsto set thecommunicationsand preferencesettings for thecamera.( ➜ p. 66) Display Style Button Rotate 90 Degrees Buttons Rotates selected image left or right90 degrees. Image Information Button Thumbnail Display Area Thumbnail (small) imagesdisplay here when the ca...

81 Troubleshooting the Computer Connection Double-Check: 1. Is the cable between the camera and computer correctly attached? Windows Platform ( ➜ p. 9) Macintosh Platform ( ➜ p. 57) 2. Has the camera been set to the mode for communicating with a computer? • PowerShot S100 DIGITAL ELPH/DIGITAL IXUS S...

82 Macintosh Platform • Have you tried switching the cable to a different port? If there is more than one port, try switching the cable to another port. • Are the communication settings appropriate? If the settings for the port to which the camera is connected are incorrect, the “Communication Setti...

83 Customer Support Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo146-8501, Japan NORTH AMERICA Canon U.S.A., Inc. Canon Customer Care CenterPhone (US): 1-800-828-4040(Available Mon. - Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-80...

84 Adobe Customer Support To view information on the support options available from Adobe: Windows 1. Use the Microsoft windows Explorer to open the [Support] folder in the PhotoDeluxe Home Edition CD-ROM. 2. Double-click the folder that corresponds to your geographic location. Inside, you will find...

Table of Contents 3 Replaying/Erasing Displaying Images Singly (Single Image Replay) .............. 46 Zooming an Image ....................................................... 46 Displaying Images in Sets of Nine (Multi Image Replay) . 47 Switching between Sets of Nine Images ..........................

4 Read This First Please Read Test Shots Before you shoot images of subjects of importance to you, we stronglyrecommend that you shoot several trial images to confirm that you areoperating the camera correctly. Please note that Canon Inc., itssubsidiaries and affiliates, and distributors of its digi...

Read This First 5 WARNINGS • Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damageeyesight. In particular, r...

Read This First 7 • Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact withthe metallic components of other materials in waste containers maylead to fire or explosions. Discard the batteries in specialized wastefacili...

8 Read This First Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or otherequipment generating strong electromagnetic fields. Exposure tostrong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related P...

9 Preparing the Camera Guide to Components Front View * Used to connect the camera to a TV or computer. Open the cover and use the supplied video cable to connect to a TV or use the suppliedinterface cable to connect to a computer. = Optical Viewfinder Window ➜ p. 23 = AF Auxiliary Light Emitter = R...

10 Preparing the Camera Back View = CF Card Slot Cover ➜ p. 17 = Strap Holder ➜ p. 18 = Battery Cover ➜ p. 14 = Optical Viewfinder ➜ p. 23 = Lock for the CF Card Slot Cover ➜ p. 16 = LCD Monitor ➜ p. 25 = Tripod Socket = DC Coupler Terminal Cover ➜ p. 16

Preparing the Camera 11 Operation Panel Indicators • The indicators will light or flash when the main switch is pressed or at various stages as the shutter button is pressed. Upper Indicator Green: Ready to record Flashing Green: During camera warm-up / Recording to CF card / Reading CF card / Delet...

12 Preparing the Camera Charging the Battery Pack Recharge the battery pack with battery charger CB-2L or CB-2LEthe first time you use the camera or when the “Change the batterypack” message is displayed. Battery charger model names and types vary by region. • Insert the battery pack into the charge...

Preparing the Camera 13 Handling Precautions • Do not charge the battery pack in poorly ventilated areas.• Do not charge batteries other than Battery Pack NB-1L in this charger.• The battery pack continues to discharge a minimal portion of its power while installed in the camera, even with the camer...

14 Preparing the Camera Installing the Battery Pack Install rechargeable Battery Pack NB-1L in the camera as shown below. • Please recharge the battery pack ( ➜ p. 12) before you use it for the first time. Battery Lock • Slide the battery cover in the direction of the arrows. • Press the battery loc...

Preparing the Camera 15 • Never open the battery cover or remove the battery pack when the main switch is on. • Remove the battery pack from the camera when the camera is not in use. Please note, however, that the date, time and other camerasettings may reset to the default settings if the battery p...

16 Preparing the Camera Using the AC Adapter (optional) It is recommended that you use the optional Canon AC adapter KitACK300, which includes the Compact Power Adapter CA-PS300, theDC Coupler DR-300 and the power cord, when using the camera forextended periods of time to shoot or connect to a compu...

Preparing the Camera 17 Installing a CF Card Turn the camera power off and insert the CF card with thefollowing procedures. • Slide the lock down and open the CF card slot cover. • Insert the CF card until the slot’s eject button fully extends. Close the CFcard slot cover. • To remove the CF card, p...

18 Preparing the Camera Handling Precautions for CF Cards • CF cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. • Do not attempt to disassemble or alter a CF card.• Moving a CF card rapidly between temperature extremes will c...

Preparing the Camera 19 Setting the Date and Time • The Set Date/Time menu will appear the first time the camera power isturned on or whenever the built-inrechargeable lithium battery chargeis low. Start from Step 4 to set thedate and time. • Press the main switch until the indicator glows green. • ...

20 Quick Start Shooting Slide the mode switch to the (Shooting) position. Press the main switch. Holding it until the indicatorglows green ➜ p. 22. To zoom, press the zoomlever towards the (telephoto) or (wide angle) icon. Press the shutter button. Press the shutter buttonlightly (halfway), wait unt...

Quick Start 21 When you have finished viewing images, press the main switch toturn off the power. Erasing Shortcut 1. Hold down the button and press the button. 2. Use the button to select [OK] and press the button. Replaying Slide the mode switch tothe (Replay) position. The last image will appear ...

22 Basic Functions Turning the Power On/Off Press the main switch until the indicatorglows green.• When the mode switch is set to (Shooting), the lens will extend whenthe main switch is turned on. • When the mode switch is set to (Replay), the LCD monitor will turn on. Turn off the power by pressing...

Basic Functions 23 Switching between the Shooting / Replay Modes Shooting Slide the mode switch to the position. Replay Slide the mode switch to the position.• The lens remains extended when the mode switch is first switched to replay.It retracts when you press the or button. Using the Optical Viewf...

24 Basic Functions About the Autofocus Function This camera employs AiAF (artificial intelligence autofocus) technologywhich uses a broad metering field to calculate the focal distance withhigh precision. It delivers a crisp focus even when the photographicsubject is slightly off-center. Using the F...

Basic Functions 25 Using the LCD Monitor The LCD monitor can be used to shootor replay images. • The image in the LCD monitor will darken in strong sunlight or brightlight. This does not constitute amalfunction. LCD Monitor Shooting Mode • Pressing the button turns the LCD monitor on or off. • The L...

26 Basic Functions Remaining ImageCapacity p.33p.40p.41p.35p.36p.37p.39 Shooting ModeExposure CompensationWhite BalanceImage QualityFlash Shooting MethodMacro/Infinity Information Displayed on the LCD Monitor Shooting Mode In shooting mode, information about the current settings andremaining image c...

Basic Functions 27 Replay Mode File Number Image Number Shooting Date In standard mode, the followinginformation is displayed.• File Number• Image Number (Image Number/Total Number of Images) • Shooting Date• Protection Status ( ) In detailed mode, the followingsupplementary information is displayed...

28 Basic Functions LCD Monitor Menus / Switching between Display Modes Zoomed Image Entire Image (Single Image Display) Replay Mode The zoom levercan be used toswitch betweenmagnificationlevels. Auto Manual Black & White Stitch Assist Shooting Mode The following menus will display on the LCD mon...

30 Basic Functions Pressing the Shutter Button The shutter button features a two-stage action. Pressing Halfway The camera uses the first stage toautomatically set the exposure, autofocusand white balance. When it has finishedmetering, two beeps sound and theupper indicator glows green.When the flas...

Basic Functions 31 Using the Zoom The zoom can be adjusted to any setting in the 35 to 70 mm rangein 35 mm film equivalent terms. Telephoto/Wide Angle Pressing the zoom lever towards (telephoto) zooms in on the subject,making it appear closer. Pressing the zoom lever towards (wide angle) zooms out f...

32 Basic Functions • The digital zoom function combines the optical zoom with a digital teleconverter feature. Please note, however, that the morethe image is zoomed with the digital zoom, the grainier theimage becomes. Digital Zoom • The digital zoom is available when the LCD monitor is on and the ...

33 Shooting Selecting a Shooting Mode The camera features the following shooting modes. Auto Mode Most settings are automatically selected bythe camera. Manual Mode The image quality, exposure, white balanceand other settings are manually selected bythe user. Black & White Mode Images are shot i...

34 Shooting Functions Available in Each Shooting Mode * Default value. ● Setting available. ▲ Selectable for first frame only. Digital Zoom Flash ImageQuality ShootingMethod Macro Mode Infinity Mode Exposure Compensation White Balance p.60 p.36 p.35 p.38 p.37 p.39 p.39 p.40 p.41 Auto Manual Black &a...

Shooting 35 Adjusting the Image Quality Images can be recorded at the following quality (resolution andcompression) settings. Super-Fine / Large (1600 x 1200 pixels) Fine / Large (1600 x 1200 pixels) Fine / Small (640 x 480 pixels) • Available with the , , and modes. ( : selectable for the first ima...

36 Shooting Using the Flash Select a shooting mode ( ➜ p. 33) 1. Available with the , , , and modes. ● Setting available. ▲ Can be selected for first image only. • Press the button to cycle through the flash settings. • The flash mode may be adjusted while information about the current settings is d...

Shooting 37 Red-Eye Reduction The red-eye phenomenon is caused by light reflected from the bloodvessels in the back of the eye; the effect is most often seen when using aflash to photograph people in dimly lit environments. This phenomenoncan be prevented by recording in the red-eye reduction mode. ...

38 Shooting Shooting Continuously • Available with the and modes. • Display . • The camera will shoot continuously at approximately 2 images per second*(with the LCD monitor off) while theshutter button is held down.Recording ceases when the shutterbutton is released. * This figure reflects standard...

Shooting 39 Shooting Close-Ups/Infinity Shots Macro Mode Use this mode to record subjects in the range of 10to 57 cm (4 to 22 in.) from the tip of the lenswhen set to wide angle and in the range of 27 to57 cm (11 to 22 in.) when set to telephoto. Infinity Mode Use this mode to record landscapes and ...

40 Shooting Adjusting the Exposure Compensation An image can be under-exposed if the subject is backlit orpositioned in a bright location. Lights in night shots may alsoappear too bright. To avoid under-exposing the image, use theexposure compensation function. • Available with the , , and modes. ( ...

Shooting 41 Setting the White Balance Setting the white balance to match the dominant light sourcewhen shooting will adjust the coloring of the image to thecorrect settings for the prevailing light conditions. Auto Settings are automatically selected by the camera. Daylight Use this setting for reco...

42 Shooting Shooting in Stitch Assist Mode Stitch Assist mode can be used to shoot images, which overlap,and which can later be merged to create one panoramic imageon a computer. • To merge the images on the computer, use PhotoStitch, one of the supplied programs. Framing a Subject The PhotoStitch p...

Shooting 43 • Shoot the first frame in the series.• The exposure and white balance settings are set and locked with thefirst image. Successive images usethe same settings. • Make the brightness in each image consistent. The final image will appear unnatural if the difference in brightness is too gre...

Shooting 45 Shooting / Replaying with a TV Monitor A TV monitor can be used to shoot or replay images when it isconnected to the camera via the supplied video cable (VC-200).Always turn the camera and TV power off when attaching ordetaching the video cable. • After the cable has been attached, turn ...

46 • An image can be magnified approximately 2.5 times in the singleimage replay mode. • Use the or button to move the selection area around the image. • Press the zoom lever towards to reset the zoom setting to normal. Replaying/Erasing Displaying Images Singly (Single Image Replay) • The last reco...

Replaying/Erasing 47 • The last recorded image will appear in the display (single image replay). • A set of nine images willappear in thedisplay (multiimage replay). • You can change the image selection with the or button. Pressing the zoom lever towards will causethe selected image to fill the disp...

48 Replaying/Erasing Rotating Images in the Display Images can be rotated 90º or 270º clockwise in the display. 0º (Original) 90º 270º • Use the or button to select then press the button. • Cycle between the 90º/270º/0º orientation each time you press the button. • Press the button several times unt...

Replaying/Erasing 51 Protecting Images You can protect important images to prevent their accidental erasure. • Use the or button to select then press . • Use the or button to select an image. Press the button to protect it. • Pressing the button protects the image. If the button is pressed a second ...

52 Replaying/Erasing Print Settings (DPOF Settings) Images on a CF card can be individually selected for printing in aspecified number of copies. The print type and date or file numberprinting options can also be selected. These settings are compatiblewith Digital Print Order Format (DPOF) standards...

Replaying/Erasing 53 Setting the Print Style The following settings can be selected. Standard Prints one image per page. Index Prints the selected images in a single sheet. Print Type Both Prints the images in both standard and indexformats. Date Adds the date to the print. File No. Adds the file nu...

54 Replaying/Erasing (Print Type) You may select [Standard], [Index] or[Both] options. (Date) You may select either [On] or [Off]. (File No.) You may select either [On] or [Off]. • Press the button several times until the replay screen reappears. • Use the or button to select [Order]. Display the Pr...

Replaying/Erasing 55 • Use the or button to select an image. • You can use the zoom lever to switch between the single image and multiimage (3 images) display. • Pressing the button displays the 34 icon so that the number of print copies can be specified. Pressing the button a second time causes the...

56 Replaying/Erasing • Images are printed in the order of the oldest image to the newest.• When the print type is set to [Both] and both the date and file number are set to [On], only the file number will print on theindex sheet. • The output of some printers or developing labs may not reflect the s...

Replaying/Erasing 57 Erasing Images Erasing Images Singly • Please note that erased images cannot be recovered. Exerciseadequate caution before erasing afile. • Protected images cannot be erased with this function. • Use the or button to select then press the button. • Use the or button to select th...

58 Replaying/Erasing Erasing All Images • Please note that erased images cannot be recovered. Exerciseadequate caution before erasing afile. • Protected images cannot be erased with this function. • Use the or button to select then press the button. • Use the or button to select [OK]. • To cancel th...

59 Camera Settings Displaying the Setup Menu The Setup menu is used to adjust the camera settings. The procedurefor displaying the Setup menu is slightly different for each shootingmode (p. 33). Use the procedures shown below.Please see page 35 for instructions on changing the image qualitysettings....

60 Camera Settings • Use the or button to select [On] or [Off]. • This function is not available in the or mode. Display the Setup menu ( ➜ p. 59) Switching the Digital Zoom On/Off • Use the or button to select then press the button.

Camera Settings 61 About File Numbers • Images are assigned individual frame numbers ranging from 0001 to 9900 and organized in folders containing up to 100 images. Thefolders are assigned names from 100 to 998. (Folder numbers cannotcontain 99 in the last two digits.) • Since images shot in , or ar...

62 Camera Settings Saving the Shooting Mode Setting You can select whether or not to save the shooting mode settingswhen the camera is turned off. When set to [Last], the currentshooting mode setting will still be effective when the camera isturned on again. • Use the or button to select then press ...

Camera Settings 63 Display the Setup menu ( ➜ p. 59) Switching the Beep On/Off A beep sounds for confirmation purposes when the shutter button ispressed or a camera setting is changed. The beep can be turned off. • Use the or button to select then press the button. • Use the or button to select [On]...

64 Camera Settings Switching the Auto Power Down Function On/Off The auto power down function can be set to automatically turn thecamera power off after a set period of time passes without thecamera being used. On The camera shuts off after approximately 3 minutes in shooting mode orapproximately 5 ...

Camera Settings 65 Formatting CF Cards New CF cards must be formatted in accordance with the followingprocedures before use. • Please note that formatting a CF card erases all its data, including protected images and other types of data. • Use the or button to select then press the button. • Use the...

66 Camera Settings Setting the Language The language in which menus and messages are displayed can beselected with this function. • Use the or button to select then press the button. • Use the or button to select a language. Display the Setup menu ( ➜ p. 59) • The Language menu can also be displayed...

67 Appendices Care and Maintenance of the Camera Use the following procedures to clean the camera body, lens,viewfinder and LCD monitor. • Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage theequipment. Camera Body Gently wipe dirt ...

68 Appendices Troubleshooting Camera will not operate Cause Solution • Press the main switch for a few moments. • Close the battery cover or CF card cover and then press the mainswitch again to turn the camera off. • Insert a fully charged battery pack.• Use an approved AC power source.• Wipe the ba...

Appendices 69 Lens will not retract Cause Solution • Close the battery cover or CF card cover and then press the mainswitch again to turn the camera off. • Close the battery cover or CF card cover and then press the mainswitch to turn the camera off. Battery pack consumed quickly Cause Solution • Fu...

70 Appendices Image is blurred, out of focus, or not as expected Cause Solution • Be careful not to move the camera when pressing the shutter button. • Ensure that there is at least 57 cm (22 in.) between the camera lensand subject. • Use the macro mode to shoot close- ups between 10 and 57 cm (4 an...

Appendices 71 Subject is too bright Cause Solution • When using the flash, stay 27 cm to 3 m (11 in. to 10 ft.) from thesubject at the maximum wide angleor 27 cm to 2 m (11 in. to 7 ft.)from the subject at the maximumtelephoto setting. • Adjust the exposure compensation to a negative (-) setting. • ...

72 Appendices List of Messages The following messages may appear in the LCD monitor. Busy...: Image is being recorded to, or readfrom, CF card No CF card: You attempted to shoot or replayimages without a CF card installed. Cannot record!: You attempted to shoot an imagewithout a CF card installed. C...

Appendices 73 Corrupted Data: You attempted to replay an imagewith corrupted data. CCD RAW: You attempted to replay a CCD RAWimage. Unidentified Image : You attempted to replay an image thatwas recorded in a special format(proprietary format used by the cameraof another manufacturer, etc.). Cannot m...

74 Appendices Specifications PowerShot S100 DIGITAL ELPH / DIGITAL IXUS Image Sensor: Approx. 2.11 million-pixel1/2.7 inch charge coupled device(effective pixels: approx. 2.02 million) Image Quality: Super-Fine / Large (1600 x 1200 pixels)Fine / Large (1600 x 1200 pixels)Fine / Small (640 x 480 pixe...

Appendices 75 Interface: USB / CF Card Slot (Type I) / Video Out Power Supply: Battery Pack NB-1LCompact Power Adapter CA-PS300 (with DCCoupler DR-300) Operating Temperatures: 0 - 40 ºC (32 - 104 ºF) Operating Humidity: 10 - 90% Dimensions: 87.0 x 57.0 x 26.9 mm (3.4 x 2.2 x 1.1 in.)excluding protru...

78 Appendices Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo146-8501, Japan NORTH AMERICA Canon U.S.A., Inc. Canon Customer Care CenterPhone (US): 1-800-828-4040 (Available Mon. - Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-800-652...

Appendices 79 Canon Euro-Photo GmbH Customer-Support: (02154) 495-610Info-Desk: (02154) 495-444Fax: (02154) 495-333 Canon Italia S.p.A. Pronto Canon : 02 8249 2000 BBS : 02 8249 2099 Canon Belgium N.V. / S.A. Helpdesk: 0900-10627Tel.: (02) 722.04.11 Fax: (02) 721.32.74 Canon Luxembourg S.A. Tel.: (3...

80 Appendices Austria Canon GmbH Zetschegasse 11, 1232 Wien, AustriaTel: 01 680 88-0Fax: 01 680 88-222 OCEANIA Canon Australia Pty. Ltd. Info-Line: (02) 9805 2864 Canon New Zealand Ltd. Info-Line: 0900-522666 ASIA Canon Singapore Pte. Ltd. 79 Anson Road, #09-01 / 06, Singapore 079906Phone: (65) 532 ...

FCC Notice (Digital Camera, Model PC1001) This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions;(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesir...