Page 2 - Introduction; Note; Disclaimer
2 Introduction Thank you for purchasing a Canon digital camera. This guide explains the software usedwith the following models. • PowerShot S100 DIGITAL ELPH• DIGITAL IXUS• PowerShot S10• PowerShot S20 Note • The serial port interface is only supported by the PowerShot S10 and PowerShot S20 models. ...
Page 3 - Windows; Using the Software
3 Windows Using the Software on the Windows Platform Introducing the Software .............................................................. 4 System Requirements ................................................................... 6 Installing/Uninstalling the Software .................................
Page 4 - Introducing the Software; Canon Digital Camera Solution Disk; Camera Connection Functions; Image File Management Functions; Image Printing Functions
4 Introducing the Software This section introduces the powerful software programs for the Windows platformcontained on the CD-ROMs included with the camera. Canon Digital Camera Solution Disk ZoomBrowser EX To load camera images, start ZoomBrowser EX. Camera Connection Functions (Also effective for ...
Page 5 - PhotoStitch; TWAIN Drivers; Adobe PhotoDeluxe CD-ROM
5 Windows Supports the Adobe PhotoDeluxe Photo Retouching Program • Starts this photo-retouching program to edit and apply special effects to your images. Adobe PhotoDeluxe Home Edition can be installed from the AdobePhotoDeluxe CD-ROM. Starts Your E-mail Program • Starts your e-mail program and pre...
Page 6 - System Requirements
6 System Requirements The following system requirements must be met to install and operate the software. = Computer Model IBM PC/AT compatible = OS Windows 95, Windows 98 (Including the Second Edition),Windows NT 4.0 (Service Pack 3 or higher required) orWindows 2000 = CPU Pentium 133 MHz or better ...
Page 7 - Installing/Uninstalling the Software; Installing from the Canon Digital Camera Solution Disk; Close any programs that are running.
7 Windows Installing/Uninstalling the Software Installing from the Canon Digital Camera Solution Disk If you are installing the software onto Windows NT 4.0 or Windows 2000, you mustfirst log on as the administrator and then install the software. 1. Close any programs that are running. 2. Place the ...
Page 8 - Installing from the Adobe PhotoDeluxe CD-ROM; If You Will Be Connecting via a USB Port; Uninstalling the Software
8 Installing from the Adobe PhotoDeluxe CD-ROM For installation instructions, place the Adobe PhotoDeluxe CD-ROM in the drive and click[ReadMe & Guide] and [Install Guide] in the window that displays. The serial number shown during installation will be required for the userregistration process. ...
Page 9 - Connecting the Camera to a Computer; Selecting a Connection Method; Use the AC Adapter; CF Card Reader or PC Card Slot (; USB Cable Connector Shapes; Computer USB Port
9 Windows Connecting the Camera to a Computer Selecting a Connection Method The following different interfaces and methods can be used to connect the camera to acomputer. Once a connection has been established using one of the methods, you canstart the software and begin to load the camera images ( ...
Page 10 - Serial Cable Connector Shapes; Computer Serial Port
10 Serial Port (COM Port) ( ➜ p. 20) The serial interface is supported by the PowerShot S10 and PowerShot S20 models only. Serial Cable Connector Shapes Camera End Computer End Computer Serial Port The serial portis marked withthis symbol.
Page 11 - Connecting to a USB Port; Requirements for the USB Interface; Important
11 Windows Connecting to a USB Port Requirements for the USB Interface • The USB interface can only be used to connect the camera to computers with Windows 98 or Windows 2000 preinstalled (clean installation). The USB ports oncomputers running versions of Windows 98 or Windows 2000 upgraded fromWind...
Page 12 - Install the USB driver the first time you connect via a USB port. (
12 1. Attach the supplied USB cable to a USB port directly on the computerand to the DIGITAL terminal on the camera as shown below. • There is no need to turn the camera or computer power off when attaching or detaching the USB cables. • Please consult your computer’s manual for the location of the ...
Page 13 - Installing the USB Driver; Notes Regarding Installation
13 Windows Installing the USB Driver (Preinstalled Windows 98/2000 Systems Only) Notes Regarding Installation • The USB driver only needs to be installed the first time the camera is connected via the USB interface. Installation is not required from the second time onward. • Do not cancel the instal...
Page 14 - Place the Canon Digital Camera Solution Disk in the CD-ROM drive.
14 3. Select [Search for the best driver for your device (recommended)] andclick the [Next] button. The dialog will change to the one that allows you to specify the search location. 4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive. 5. Confirm that the [CD-ROM drive] option is sele...
Page 16 - Installing the USB Driver into Windows 2000
16 Installing the USB Driver into Windows 2000 Begin by logging onto the computer as the Administrator and then install the USBdriver. 1. Once you have attached the USB cable to the camera and computer, setthe camera to the mode for communicating with a computer. ( ➜ p. 12) • PowerShot S100 DIGITAL ...
Page 18 - Click [No to All] if the “Confirm File Replace” dialog displays.
18 8. Click [No to All] if the “Confirm File Replace” dialog displays. 9. Read the dialog and click the [Finish] button. An event dialog for your camera model will display to allow you to selectapplication programs. ( ➜ p. 21, Step 2 or p. 41, Step 2.) • If a dialog prompts you to restart your compu...
Page 19 - Connecting via a CF Card Reader or PC Card Slot; Place the CF card in the PC card adapter.
19 Windows Connecting via a CF Card Reader or PC Card Slot To load images directly from a CF card to a computer, eject the card from the camera,place it in a separately sold PC card adapter (PCMCIA card adapter) and insert theassembly into the PC card slot. The adapter is not required if your comput...
Page 21 - From Loading to Printing; What to Do if the “Caution! Connection Time” Dialog Displays; Starting ZoomBrowser EX; USB Interface; Attach the camera to the computer with the USB cable. (
21 Windows From Loading to Printing This section provides a simple explanation of the procedures for using ZoomBrowser EXto load and print images. Please refer to the ZoomBrowser EX Help file for more details. What to Do if the “Caution! Connection Time” Dialog Displays • If approximately five minut...
Page 22 - How to Have ZoomBrowser EX Start Automatically; CF Card Reader or PC Card Slot Interface; Start ZoomBrowser EX.
22 How to Have ZoomBrowser EX Start Automatically • If you want ZoomBrowser EX to start automatically without first displaying the event dialog, use the procedures below to change the settings.1. Open the [My Computer] window while the camera is connected to the computer via the USB interface. 2. Op...
Page 23 - Attach the camera to the computer with the serial cable. (
23 Windows Serial Interface 1. Attach the camera to the computer with the serial cable. ( ➜ p. 20) 2. Turn the camera’s mode dial to the position. 3. Start ZoomBrowser EX. Double-click the [Canon ZoomBrowser EX] icon on the desktop to start the program. If the [Canon ZoomBrowser EX] icon does not ap...
Page 24 - The ZoomBrowser EX Camera Window; How to Check and Change Various Camera Settings
24 The ZoomBrowser EX Camera Window The Camera Window will open when a connection to a camera or CF card is initiated.Thumbnail (small) images will display. SETUP OPTIONS Button Sets various camerasettings (see inset below)using the computer. How to Check and Change Various Camera Settings • You can...
Page 25 - Loading and Saving Images from the Camera; Create a new folder in which to save the images from the camera.
25 Windows Loading and Saving Images from the Camera 1. Create a new folder in which to save the images from the camera. In the Tree View, right-click the [Image Library One] folder, select [New Folder] fromthe pop-up menu and input a folder name. 2. Select the new folder in the Tree View. 3. Select...
Page 27 - Printing Images; Adjust the print settings if you wish to change the page layout.
27 Windows Printing Images 1. Select the image(s) you wish to print and click the [PRINT] button. The PhotoRecord printing utility will start and automatically display the selectedimage(s) in a page layout. 2. Adjust the print settings if you wish to change the page layout. Please refer to page 37 o...
Page 28 - Basic Procedures for Using ZoomBrowser EX; Displaying Images; Zooming Images In and Out
28 Basic Procedures for Using ZoomBrowser EX This section provides a simple explanation of the basic procedures for using ZoomBrowserEX. Please refer to the ZoomBrowser EX Help file for more details. Displaying Images Zooming Images In and Out (a) Double-Clicking the Browser Display Area Double-clic...
Page 29 - About the Image Viewer Edit Panel
29 Windows Zooming a Single Image Double-click an image in the Browser Display Area to display it in the Image Viewer. Double-click the target image. Edit Panel Button About the Image Viewer Edit Panel • The edit panel displays when you click Edit Panel button in the Image Viewer. CROP Button Drag t...
Page 30 - Select a play method.
30 Displaying Images in Chronological Order Select a folder or some images, click the [View] menu and select [TimeTunnel]. Theselected image(s) will display in a time tunnel. Please refer to the TimeTunnel Help filefor more details on how to operate this function. Showing Images in a Slide Show The ...
Page 32 - Organizing Images; Changing the File Location
32 Organizing Images Changing the File Location You can move an image file by dragging and dropping it onto another folder icon. The [Image Library One] folder is located within the folder in which ZoomBrowser EXwas installed. The Tree View displays files at levels below this folder. Adding a New Li...
Page 33 - Erasing Images; Erasing Images Singly; Check the image to make sure it can be deleted and click [Delete].; Erasing Images by Folder; Check the images to make sure they can be deleted and click [Delete].
33 Windows Erasing Images An image cannot be recovered after it is erased. Double-check to make sure youhave the right images before erasing. Erasing Images Singly 1. Select the target image in the Browser Display Area and click the [DELETE]button. A confirmation dialog will display. 2. Check the im...
Page 34 - Saving Computer Images to a CF Card in the Camera; Select the images from the computer and click the [Open] button.
34 Saving Computer Images to a CF Card in the Camera 1. Open the Camera Window. ( ➜ pp. 21-23) 2. Click the [UPLOAD] button in the Camera Window. The “Upload Images from Disk” dialog will display. 3. Select the images from the computer and click the [Open] button. The “Save to Camera” dialog will di...
Page 35 - Stitching Panoramas Together with PhotoStitch; To Merge Images Registered in ZoomBrowser EX; Images Shot in Stitch Assist Mode
35 Windows Stitching Panoramas Together with PhotoStitch To Merge Images Registered in ZoomBrowser EX • You can merge a series of overlapping images into a single, seamless panorama.• Select the images in the browser area, click the [Edit] menu and select [PhotoStitch]. The PhotoStitch program will ...
Page 36 - Editing and Applying Special Effects to Images; Select an image from the Browser Display Area of ZoomBrowser EX.; Sending Images via E-mail; Adjust the image size and quality.
36 Editing and Applying Special Effects to Images 1. Confirm that the Adobe PhotoDeluxe Home Edition program has beeninstalled. 2. Select an image from the Browser Display Area of ZoomBrowser EX. 3. Click the [Edit] menu and select [Edit Image using Adobe PhotoDeluxeHome Edition] Please refer to the...
Page 37 - PhotoRecord Window
37 Windows Printing Images • Select a folder or image(s) for printing from the Browser Display Area or Camera Window and click the [PRINT] button to start the PhotoRecord program. • You can also click the button while an image is displayed in a slide show to add a print mark to it. When the slide sh...
Page 38 - Creating a New Album
38 Image Resizing Mode Image Rotating Mode Drag an arrow toresize the image. The arrows displaywhen the mouse ispositioned overthe image. Click this to change torotating mode. Click thisto displaya pop-upmenu. Drag an arrow torotate the image. Click this to changeto image resizingmode. Click thisto ...
Page 40 - Backing Up Data; How to Restore the Database File from a Backup File; Select the appropriate backup file.
40 Backing Up Data You are recommended to use the following procedures to back up your image data afteryou add, delete or change images from ZoomBrowser EX. 1. Click the ZoomBrowser EX [File] menu and select [Backup Database]. 2. Input a file name and click [Save]. The current database file will be ...
Page 41 - Connect the camera to the computer’s USB port. (
41 Windows Loading Images with TWAIN-CompliantApplication Programs (Adobe PhotoDeluxe,Adobe Photoshop, etc.) This section explains how to load images with TWAIN-compliant application programsusing Adobe PhotoDeluxe Home Edition as an example. Please refer to the manual foreach application program fo...
Page 42 - Serial Interface; Start Adobe PhotoDeluxe Home Edition.
42 Serial Interface 1. Attach the camera to the computer with the serial cable. ( ➜ p. 20) 2. Turn the camera’s mode dial to the position. 3. Start Adobe PhotoDeluxe Home Edition. 4. Click [Get & Fix Photo] at the upper left of the window. 5. Click [Get Photo] from the icons that display and sel...
Page 43 - Loading the Camera Images; Click the [2 Done] tab in the Adobe PhotoDeluxe Home Edition window.; Guide to the TWAIN Driver Window
43 Windows Loading the Camera Images 1. Click the [Camera] button. To load images directly from a CF card outside the camera, click the [My Computer]button instead. The images from the camera or CF card will display in thethumbnail display area. 2. Select the images you wish to download and click th...
Page 44 - Troubleshooting the USB Driver Installation; Check This First; Uninstalling the USB Driver from Windows 98; Check the USB Driver Status
44 Troubleshooting the USB Driver Installation Check This First 1. Is the camera connected to the computer correctly? ( ➜ p. 12) 2. Is the camera power on? • PowerShot S100 DIGITAL ELPH/DIGITAL IXUS Slide the mode switch to and press the main switch to power up the camera. • PowerShot S10/S20 Turn t...
Page 47 - Select the name of your camera model and click the [Remove] button.; Uninstalling the USB Driver from Windows 2000
47 Windows Your camera model namewill appear here. What to Do if Your Camera Model Appears in the “Scannersand Cameras Properties” Device List 1. Select the name of your camera model and click the [Remove] button. 2. Click [OK] to close the “Scanners and Cameras Properties” dialog. 3. Delete the [Dr...
Page 51 - Macintosh
51 Macintosh Introducing the Software ............................................................ 52 System Requirements ................................................................. 54 Installing/Uninstalling the Software .......................................... 55 Connecting the Camera to a...
Page 53 - Canon Digital Camera Plug-In Module
53 Windows Macintosh Supports the Adobe PhotoDeluxe Photo Retouching Program • Starts this photo-retouching program to edit and apply special effects to your images. Adobe PhotoDeluxe can be installed from the Adobe PhotoDeluxe CD-ROM. Adjusting Images for Transmission by E-mail • Reduces the image ...
Page 62 - Connecting to a Serial Port (Printer or Modem Port); Shut down the computer and turn the camera power off.; About AppleTalk
62 Connecting to a Serial Port (Printer or Modem Port) The serial port interface is only supported by the PowerShot S10 and PowerShot S20models. 1. Shut down the computer and turn the camera power off. 2. Attach the supplied serial cable to a serial port on the computer and tothe camera’s DIGITAL te...
Page 63 - What to Do if a Warning Dialog Displays; Starting ImageBrowser
63 Windows Macintosh From Loading to Printing This section provides a simple explanation of the procedures for using ImageBrowser toload and print images. Please refer to the ImageBrowser Help file for more details. What to Do if a Warning Dialog Displays • If approximately five minutes pass without...
Page 64 - How to Set ImageBrowser to Not Start Automatically
64 How to Set ImageBrowser to Not Start Automatically 1. Open the Apple menu and select [Control Panels] and [Canon USB Camera]. The “Settings for USB Connection” dialog will display. 2. Click the [The application program below will start.] option to clear the check mark.3. Click the close box at th...
Page 66 - The ImageBrowser Camera Window
66 The ImageBrowser Camera Window The Camera Window will open when a connection to a camera or CF card is initiated.Thumbnail (small) images will display. How to Check and Change Various Camera Settings • You can adjust the date, time and owner settings in the “Camera Settings” dialog using the comp...
Page 69 - Print Window
69 Windows Macintosh Printing Images 1. Select the image(s) you wish to print and click the [PRINT] button. The Print window will display with the images arranged in an auto layout. 2. Adjust the print settings if you wish to change the page layout. 3. Click the [PRINT] button in the Print window. P...
Page 70 - Basic Procedures for Using ImageBrowser; Zooming a Single Image
70 Basic Procedures for Using ImageBrowser This section provides a simple explanation of the basic procedures for usingImageBrowser. Please refer to the ImageBrowser Help file for more details. Displaying Images Zooming Images In and Out You can zoom images in and out by clicking the (REDUCE) or (EN...
Page 72 - (a) Drag and drop images from the Browser Window to another; Refreshing the Contents of the Browser Window
72 Organizing Images Changing the File Location You can move an image file or folder by dragging and dropping it in another location. (a) Drag and drop images from the Browser Window to another folder in the Explorer View Section. (b) Drag and Drop a Folder within the Explorer View Section Refreshin...
Page 73 - Click the target folder in the Explorer View Section.
73 Windows Macintosh Erasing Images Erasing Images Singly Select the target image in the Browser Widnow and click the [SEND TO TRASH]button. Erasing Images by Folder 1. Click the target folder in the Explorer View Section. The images in the folder will display in the Browser Window. 2. Click the [SE...
Page 75 - To Merge Images Registered in ImageBrowser
75 Windows Macintosh Stitching Panoramas Together with PhotoStitch To Merge Images Registered in ImageBrowser • You can merge a series of overlapping images into a single, seamless panorama.• Select the images in the browser area, choose the [Edit] menu and select [PhotoStitch]. The PhotoStitch prog...
Page 76 - Confirm that the Adobe PhotoDeluxe program has been installed.; Adding Sound Annotations to Images
76 Editing and Applying Special Effects to Images 1. Confirm that the Adobe PhotoDeluxe program has been installed. 2. Select an image from the Browser Window of ImageBrowser. 3. Click the [Edit] menu and select [Adobe PhotoDeluxe]. Please refer to the Adobe PhotoDeluxe Help file and electronic guid...
Page 78 - Connect the camera to the computer with the serial cable. (
78 What to Do if the “ImageBrowser not found” Dialog Appears If you install only the Canon Digital Camera Plug-In Module without ImageBrowser,the “ImageBrowser not found” dialog may display. If this happens, use the followingprocedures to prevent ImageBrowser from attempting to start automatically. ...
Page 79 - Starting the Plug-In Module; Click the [Get Photo] button at the upper left of the window.; Click the; Loading Images from the Camera
79 Windows Macintosh Starting the Plug-In Module 1. Click the [Get Photo] button at the upper left of the window. 2. Click [Get Photo] from the tab that displays and select [Cameras]. 3. In the “Select Input Source” dialog, select [Canon Didital Camera] andclick the [OK] button. These three steps ar...
Page 80 - Guide to the Plug-In Module Window
80 Settings Buttons Use these buttonsto set thecommunicationsand preferencesettings for thecamera.( ➜ p. 66) Display Style Button Rotate 90 Degrees Buttons Rotates selected image left or right90 degrees. Image Information Button Thumbnail Display Area Thumbnail (small) imagesdisplay here when the ca...
Page 81 - Troubleshooting the Computer Connection; Is the cable between the camera and computer correctly attached?; Windows Platform
81 Troubleshooting the Computer Connection Double-Check: 1. Is the cable between the camera and computer correctly attached? Windows Platform ( ➜ p. 9) Macintosh Platform ( ➜ p. 57) 2. Has the camera been set to the mode for communicating with a computer? • PowerShot S100 DIGITAL ELPH/DIGITAL IXUS S...
Page 82 - Macintosh Platform
82 Macintosh Platform • Have you tried switching the cable to a different port? If there is more than one port, try switching the cable to another port. • Are the communication settings appropriate? If the settings for the port to which the camera is connected are incorrect, the “Communication Setti...
Page 83 - Customer Support; Canon Customer Support; NORTH AMERICA; OCEANIA
83 Customer Support Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo146-8501, Japan NORTH AMERICA Canon U.S.A., Inc. Canon Customer Care CenterPhone (US): 1-800-828-4040(Available Mon. - Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-80...
Page 84 - Adobe Customer Support
84 Adobe Customer Support To view information on the support options available from Adobe: Windows 1. Use the Microsoft windows Explorer to open the [Support] folder in the PhotoDeluxe Home Edition CD-ROM. 2. Double-click the folder that corresponds to your geographic location. Inside, you will find...