Canon Q T 1 0 8 5 1 V 0 1 - Manuals

Page 3 - Contents; Getting Started Overview | 4

Page 4 - Getting Started Overview; set up the hardware; Before Starting; If you do not have a wireless network, skip this step.

4 Getting Started Overview prepare your MX860 set up the hardware set up the software connect to your network (optional) start using your MX860 Prepare Your MX860 Congratulations on your new MX860. This Getting Started guide will help you through a fast, simple setup. There will be decision points i...

Page 5 - Unpack and Set Up; Check your box contents; If any parts are missing, contact Canon (see back cover for contact; Remove all packing materials; Remove all tape from the outside of the MX860.

5 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Unpack and Set Up Check your box contents 1 MX860 printer/copier/scanner/fax print head (sealed package is packed in the paper output tray— open tray to remove pa...

Page 6 - Lift the document cover and remove any packing material.; Close the document cover.; Connect a phone or answering machine for fax setup; Make sure you connect the phone cable into the port; Connect the power cord; Connect the power cord first to the MX860, then to a wall socket.

6 Lift the document cover and remove any packing material. f document cover Close the document cover. g Connect the phone line for fax setup 3 If you do not plan to fax from your MX860, proceed to step 5. Connect the phone cord from the MX860 to the wall. in from wall jack Make sure you connect the ...

Page 7 - Power up; Use the ▲ and ▼ button on the operation panel to select a language for; OK

7 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Power up 6 Press the ON button to turn on the MX860. Your MX860 will make sounds as it powers up. This is normal. Select language 7 Use the ▲ and ▼ button on the ...

Page 8 - Set Up the Hardware; Install the Print Head; With the power on, open the paper output tray; Lift the scanning unit until the support slides into place; Raise the print head lock lever; Avoid touching the contact points in the print head holder.

8 Set Up the Hardware Install the Print Head With the power on, open the paper output tray 1 paper output tray Lift the scanning unit until the support slides into place 2 scanning unit support print head holder Raise the print head lock lever 3 print head lock lever Avoid touching the contact point...

Page 9 - Unpackage the print head; When handling the print head, hold it only on the sides. Do; Remove the protective orange cap; Once the print head is in place, do not remove it

9 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Unpackage the print head 4 When handling the print head, hold it only on the sides. Do not touch the tank seats or contact points. Remove the protective orange ca...

Page 10 - Install the Ink Tanks; Unwrap the first ink tank; Pull the orange tape off to remove the protective wrap.; Remove protective cap; Hold the ink tank as shown, and twist the cap off.; Insert the ink tank into the print head; Slide the ink tank into the matching color slot.; Take care to match the inks with the labels in the print; Repeat steps 1–3 until all remaining ink tanks are in place and all

10 Install the Ink Tanks Unwrap the first ink tank 1 Pull the orange tape off to remove the protective wrap. Remove protective cap 2 Hold the ink tank as shown, and twist the cap off. Do not grip the tank with force or hold the tank on the sides to avoid squeezing ink from the tank. Insert the ink t...

Page 11 - Close the cover; The printer will perform initial start up maintenance. Wait; Press the; Load Paper; Remove the cassette; Paper should fit between the adjustable paper guides.

11 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Close the cover 5 The printer will perform initial start up maintenance. Wait until the “Load plain paper” screen displays before continuing setup. Press the 6 O...

Page 12 - Slide the guides to match the paper size; (A slight space between the paper guide and the paper stack is; Confirm paper stack does not exceed the limit; Slide the cassette back in until it clicks into place; Align the Print Head; Start alignment; Use the

12 Insert at least 3 sheets of plain paper (the minimum needed for the b next action). The cassette is for plain paper only. Slide the guides to match the paper size 3 (A slight space between the paper guide and the paper stack is acceptable.) Confirm paper stack does not exceed the limit 4 paper st...

Page 13 - Use the ◄►▲▼ buttons to enter the number of the pattern that has the; Select; to print the first alignment pattern, then press; Yes

13 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Look at the first printout 2 less noticeable more noticeable Select best pattern 3 Use the ◄►▲▼ buttons to enter the number of the pattern that has the least not...

Page 14 - Use the ◄; or; Receive mode settings; FAX priority mode; only if the machine detects the pattern for fax: Select; DRPD; Back; Basic Guide; Set Up to Receive Faxes; FAX

14 Select 3 Receive mode settings Use the ◄ or ► button to select Receive mode settings , then press OK Select the receive mode 4 Use the ▲ or ▼ button to select a receive mode, then press the OK button. Select a receive mode according to your needs. When you receive mainly faxes and sometimes voice...

Page 15 - Set Up the Software; Install the Software; Connect the USB cable to your computer; Set Up Your Fax Sender Information

15 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Set Up the Software Install the Software Connect the USB cable to your computer 1 Connect the other end to your MX860 2 Set Up Your Fax Sender Information For de...

Page 16 - click the; Enter your administrator password; If you do not know your administrator name or password,; Click

16 Insert the Setup disc 3 Double-click the 4 Setup icon on your screen If the CD-ROM folder does not open automatically, double- click the CANON_IJ icon on the desktop. Enter your administrator password 5 If you do not know your administrator name or password, click , then follow the on-screen inst...

Page 17 - Click Restart; Connecting to a Network; USB; Connecting with a USB Cable; Congratulations! You are finished with the setup.

17 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare If your computer is connected to the internet you will be prompted to register your product. The serial number is required for product registration. The serial n...

Page 18 - Choose Your Network Type; multiple; and; single

18 Connect to Your Network (optional) Choose Your Network Type The MX860 can not be used over a wireless network and a wired network at the same time. To connect additional computers to the MX860, go to "Connecting Additional Computers" on page 33. wired network connecting with an Ethernet c...

Page 19 - Wireless Networks with a Single Access Point; Locate the name and password (if applicable) of your wireless; LAN connection; Select printer to use; Setup

19 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Wireless Networks with a Single Access Point wired network connecting with an Ethernet cable wireless network with multiple access points (example: Airport Extre...

Page 20 - Select your wireless network; Select the network name you wrote down in step 1.; Connect; The network password is case sensitive.; Complete the network setup; When the Setup Completion dialog appears:; Measuring Wireless Connection Performance; The connection measurement results will display.

20 Select your wireless network 5 Select the network name you wrote down in step 1. a If your network requires a password, enter it. b Click c Connect . The network password is case sensitive. Complete the network setup 6 When the Setup Completion dialog appears: Disconnect the USB cable and place t...

Page 21 - Review results; Good; Remeasurement; Select the printer; Add

21 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Review results 2 If you see a green check mark a and the word Good , click Finish . If the connection results are less than “Good,” move the MX860 to b a new loc...

Page 22 - The Printer List window will open automatically.; Select the Scanner; The Canon IJ Network Scanner Selector dialog opens.; Select scanner; There should be only one device listed unless you have

22 Click c Add . Add the Printer (OS X v10.3.9) The Printer List window will open automatically. Click 1 Add The Printer Browser window opens. Select a MX860 series . Click b Add . Select the Scanner The Canon IJ Network Scanner Selector dialog opens. Select scanner 1 From the pop-up menu, select a ...

Page 23 - Wireless Networks with Multiple Airport Access Points

23 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Wireless Networks with Multiple Airport Access Points For example, Airport Extreme and Airport Express or Time Capsule wired network connecting with an Ethernet ...

Page 24 - Enter the name of the network (SSID) you would like the MX860 to; Do Not Use

24 Click 5 Manual Setup Enter network name 6 Enter the name of the network (SSID) you would like the MX860 to a join. Choose an encryption method that matches what is in use for your b network. If you do not have encryption enabled on your network, select Do Not Use on the encryption method pop-up m...

Page 25 - The connection measurement results display.; If you see a green check mark

25 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Click 10 Connect Complete the network setup 11 When the Setup Completion dialog appears: Disconnect the USB cable and place the MX860 where it will be used. a On...

Page 27 - Add the printer; The Printer Browser window opens.; Canon MX860 series Network

27 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Add the printer 2 Click a More Printers. Select b MX860 series . Click c Add . Add the Printer (OS X v10.3.9) The Printer List window will open automatically. Cl...

Page 28 - Wired Networks; If you will be connecting your MX860 to a wired LAN (Local Area; Make sure the MX860 is ready; Ensure the MX860 is connected to your computer; Set the Network Connection Type

28 Confirm that a checkmark appears next to the selected device, then d click Exit . Congratulations! You are finished with the setup. Go to "Start Using Your MX860!" on page 37. Wired Networks wired network connecting with an Ethernet cable wireless network with multiple access points (exam...

Page 29 - On the Canon IJ Network Tool dialog, select; click; Check Wired LAN Connection; Do not click Yes until after the Ethernet cable is connected

29 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Use the d ▲ or ▼ button to select LAN settings , then press the OK button. Select e Change WLAN/LAN , then press the OK button. Select the desired network connec...

Page 30 - Connect the Ethernet cable; Remove the LAN connector cap from the back of the MX860 (located; Get IP address automatically

30 Connect the Ethernet cable 5 Remove the LAN connector cap from the back of the MX860 (located a just above the USB connection). Connect the MX860 to your network with an Ethernet cable (not b included). Do not attempt to connect the supplied phone cord to the LAN port. Do not confuse the LAN port...

Page 31 - Disconnect the USB cable, then click; The Printer Browser window will open automatically.

31 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Disconnect the USB cable, then click 7 OK . Add the Printer (OS X v10.5.x) The Printer Browser window will open automatically. Select the printer 1 Click a More ...

Page 33 - Connecting Additional Computers; Make sure the MX860 is on and connected to your wireless or

33 hardware software network hardware software network prepare prepare hardware software network prepare hardware software network prepare Select the Scanner The Canon IJ Network Scanner Selector dialog opens. Select scanner 1 From the pop-up menu, select a Canon MX860 series Network . In the Networ...

Page 34 - Register Printer; When the; Cancel Setup; Cancel; Cancel

34 If the Setup Preparations screen appears, confirm that preparation is 4 complete, then click OK . Register printer 5 Select a Setup in the pop-up menu. Click b Register Printer . Click 6 Cancel When the Cancel Setup screen appears, click Cancel , or if the You have no printers available screen ap...

Page 37 - Start Using Your MX860!; Solution Menu

37 On-Screen Manual To open the on-screen manual, click the Get help for your Canon product or software button in the Solution Menu. The on-screen manual has three parts: Basic Guide ● Describes basic operations, including fax setup, and gives an introduction to other functions Advanced Guide ● Desc...

Page 38 - Getting Started; for; Mac Users

Getting Help from Canon For email Tech Support, please go to www.canontechsupport.com ● For live Tech Support, please call toll-free 800-828-4040 (this option provides live technical support, free of service charges, Monday–Friday, excluding holidays, during the warranty period) ● Telephone Device f...