Canon Q T 1 0 8 5 1 V 0 1 - Manual

Table of Contents:

• Page 3 – Contents; Getting Started Overview | 4
• Page 4 – Getting Started Overview; set up the hardware; Before Starting; If you do not have a wireless network, skip this step.
• Page 5 – Unpack and Set Up; Check your box contents; If any parts are missing, contact Canon (see back cover for contact; Remove all packing materials; Remove all tape from the outside of the MX860.
• Page 6 – Lift the document cover and remove any packing material.; Close the document cover.; Connect a phone or answering machine for fax setup; Make sure you connect the phone cable into the port; Connect the power cord; Connect the power cord first to the MX860, then to a wall socket.
• Page 7 – Power up; Use the ▲ and ▼ button on the operation panel to select a language for; OK
• Page 8 – Set Up the Hardware; Install the Print Head; With the power on, open the paper output tray; Lift the scanning unit until the support slides into place; Raise the print head lock lever; Avoid touching the contact points in the print head holder.
• Page 9 – Unpackage the print head; When handling the print head, hold it only on the sides. Do; Remove the protective orange cap; Once the print head is in place, do not remove it
• Page 10 – Install the Ink Tanks; Unwrap the first ink tank; Pull the orange tape off to remove the protective wrap.; Remove protective cap; Hold the ink tank as shown, and twist the cap off.; Insert the ink tank into the print head; Slide the ink tank into the matching color slot.; Take care to match the inks with the labels in the print; Repeat steps 1–3 until all remaining ink tanks are in place and all
• Page 11 – Close the cover; The printer will perform initial start up maintenance. Wait; Press the; Load Paper; Remove the cassette; Paper should fit between the adjustable paper guides.
• Page 12 – Slide the guides to match the paper size; (A slight space between the paper guide and the paper stack is; Confirm paper stack does not exceed the limit; Slide the cassette back in until it clicks into place; Align the Print Head; Start alignment; Use the
• Page 13 – Use the ◄►▲▼ buttons to enter the number of the pattern that has the; Select; to print the first alignment pattern, then press; Yes
• Page 14 – Use the ◄; or; Receive mode settings; FAX priority mode; only if the machine detects the pattern for fax: Select; DRPD; Back; Basic Guide; Set Up to Receive Faxes; FAX
• Page 15 – Set Up the Software; Install the Software; Connect the USB cable to your computer; Set Up Your Fax Sender Information
• Page 16 – click the; Enter your administrator password; If you do not know your administrator name or password,; Click
• Page 17 – Click Restart; Connecting to a Network; USB; Connecting with a USB Cable; Congratulations! You are finished with the setup.
• Page 18 – Choose Your Network Type; multiple; and; single
• Page 19 – Wireless Networks with a Single Access Point; Locate the name and password (if applicable) of your wireless; LAN connection; Select printer to use; Setup
• Page 20 – Select your wireless network; Select the network name you wrote down in step 1.; Connect; The network password is case sensitive.; Complete the network setup; When the Setup Completion dialog appears:; Measuring Wireless Connection Performance; The connection measurement results will display.
• Page 21 – Review results; Good; Remeasurement; Select the printer; Add
• Page 22 – The Printer List window will open automatically.; Select the Scanner; The Canon IJ Network Scanner Selector dialog opens.; Select scanner; There should be only one device listed unless you have
• Page 23 – Wireless Networks with Multiple Airport Access Points
• Page 24 – Enter the name of the network (SSID) you would like the MX860 to; Do Not Use
• Page 25 – The connection measurement results display.; If you see a green check mark
• Page 27 – Add the printer; The Printer Browser window opens.; Canon MX860 series Network
• Page 28 – Wired Networks; If you will be connecting your MX860 to a wired LAN (Local Area; Make sure the MX860 is ready; Ensure the MX860 is connected to your computer; Set the Network Connection Type
• Page 29 – On the Canon IJ Network Tool dialog, select; click; Check Wired LAN Connection; Do not click Yes until after the Ethernet cable is connected
• Page 30 – Connect the Ethernet cable; Remove the LAN connector cap from the back of the MX860 (located; Get IP address automatically
• Page 31 – Disconnect the USB cable, then click; The Printer Browser window will open automatically.
• Page 33 – Connecting Additional Computers; Make sure the MX860 is on and connected to your wireless or
• Page 34 – Register Printer; When the; Cancel Setup; Cancel; Cancel
• Page 37 – Start Using Your MX860!; Solution Menu
• Page 38 – Getting Started; for; Mac Users