Canon PIXMA K10332- Manuals

1 2 3 4 5 6 7 8 B A 1 2 3 Connect the Telephone Line This section describes the basic method of telephone line connection. Connect the machine with a telephone line using the supplied telephone line cable (A). Do not connect the machine and a telephone in parallel to the same telephone line using a ...

4 2 1 1 2 1 2 3 4 5 6 7 8 CD B A 3 4 Turn the Power On Plug the power cord into the left side of the machine, then connect the other end to the wall outlet. Turn on the machine (A). Do NOT connect the USB cable at this stage. • Make sure that the Document Cover (B) is closed. • Use the { or } button...

1 2 3 4 5 6 7 8 E A D F 1 5 Install the FINE Cartridges Be sure to use the supplied FINE Cartridges. • Lift the Scanning Unit (Cover) (A) until it locks into place. Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • The Scanning Unit Support (E) is fixed automat...

1 2 3 4 5 6 7 8 6 5 Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely. View the Ink Cartridge Cover straight on and check that it is locked correctly (not at an angle). Insert the Color FINE Cartridge into the left FINE Cartridge Holder in the same way. Place...

1 2 3 4 5 6 7 8 6 Set Up for Fax Reception Select a receive mode according to your needs to receive faxes easily. If you are not using the machine as a fax, go to "7 Install the Software" on page 11. When you want to receive only faxes (FAX only mode) When a call arrives: Voice call: You can...

0 6 3 2 A B C D 1 2 3 4 5 6 7 8 1 Press the FAX button (A), then press the Menu button (B). The FAX menu screen is displayed. Press the OK button. The Receive mode settings screen is displayed. Use the { or } button (C) to select a receive mode, then press the OK button. When the FAX menu returns, p...

1 2 3 4 5 6 7 8 7 Install the Software Quit all running applications before installation. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.The screens below are based on Windows Vista operating system Ultim...

7 A 1 2 Windows Macintosh If the Found New Hardware or Found New Hardware Wizard dialog box appears: Click Cancel to quit the dialog box. Proceed from . Remove the USB cable connected to your computer. TURN OFF THE MACHINE (A). Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive...

1 2 3 4 5 6 7 8 3 4 Windows Macintosh AutoPlay screen appears, click Run Msetup4.exe . User Account Control dialog box appears, click Continue . If the same dialog box reappears in subsequent steps, click Continue . Windows Vista Windows Vista Downloaded from ManualsPrinter.com Manuals

7 6 5 Windows Macintosh Click Install . Move the cursor over items to display explanations. • Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically. If you want to select particular items to install, click Custom Install and follow the on- screen instr...

1 2 3 4 5 6 7 8 8 7 Windows Macintosh Read the License Agreement screen carefully and click Yes . During installation, follow any on-screen instructions to install the software. • When the Please Allow All Install Wizard Processes screen appears, click Next . Installation starts. Downloaded from Man...

7 11 A 9 10 Windows Macintosh When the Printer Connection screen appears, connect the machine to the computer with a USB cable. The USB port is located on the back center of the machine. • Click Next . When the machine is recognized by the computer, a message appears on the screen. If installation d...

1 2 3 4 5 6 7 8 Serial No. * * * * * * * * * 12 13 Windows Macintosh To register later, click Cancel . User registration can be started from the Canon Solution Menu icon. For details, refer to "Solution Menu" on page 26. • Click Next . If connected to the Internet, the user registration page...

7 15 14 Windows Macintosh Click Exit . If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart . When the Extended Survey Program screen appears, confirm the message. If you can agree, click Agree . If you click Do not agree , the Ex...

1 2 3 4 5 6 7 8 2 3 1 7 Windows Macintosh Connect the machine to the computer with a USB cable. Make sure the machine is turned on. Double-click the Setup icon. Turn on the computer, then insert the Setup CD-ROM into the CD- ROM drive. If the CD-ROM folder does not open automatically, double-click t...

0 7 4 5 Windows Macintosh Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically. If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation. • Enter your administrator ...

1 2 3 4 5 6 7 8 8 6 7 Windows Macintosh Click Install . Move the cursor over items to display explanations. • Read the License Agreement screen carefully and click Yes . Installation starts. During installation, follow any on-screen instructions to install the software. • Click Next . If straight li...

7 Serial No. * * * * * * * * * 9 10 Windows Macintosh Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your machine. You will need your product serial number, which is located on the inside of the machine. To register later,...

1 2 3 4 5 6 7 8 11 12 Windows Macintosh Click Restart . After restarting the computer, remove the Setup CD-ROM and keep it in a safe place. When using Mac OS X v.10.3.9, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator ...

8 B B C A B B 2 1 3 4 1 2 3 4 5 6 7 8 Loading Paper Open the Paper Support (A). Move the Paper Guides (B) to both edges. Slide the left and right Paper Guides (B) against both edges of the paper. Load paper in portrait orientation with the printing side facing up. For details on media sizes and type...

After Installing the Machine M a n u a l s ■ Safety Precautions For proper use, read safety precautions before using the machine. S a f e t y a n d E n v i r o n m e n t I n f o r m a t i o n G e t t i n g S t a r t e d ( t h i s m a n u a l ) Describes how to set up and use your machine. Introduces...

S o l u t i o n M e n u i s a g a t e w a y t o f u n c t i o n s a n d i n f o r m a t i o n t h a t a l l o w y o u t o m a k e f u l l u s e o f t h e m a c h i n e ! S o l u t i o n M e n u ■ Open various applications and on-screen manuals with a single click. You can start Solution Menu from th...

Va r i o u s a p p l i c a t i o n s o f t w a r e a r e i n s t a l l e d o n t h e c o m p u t e r a l o n g w i t h t h e d r i v e r s . Yo u c a n p r i n t c r e a t i v e i t e m s b y c o r r e c t i n g / e n h a n c i n g p h o t o s u s i n g t h e a p p l i c a t i o n s . A l t e r n a ...

B C Ａ E F A D 2 1 3 4 Try Copying This section explains with Plain Paper . For various copying procedures, refer to "Copying" in the on-screen manual: Basic Guide . For details, refer to "8 Loading Paper" on page 24. • You can copy a document by simply placing it on the Platen Glass ...

2 1 3 4 Print Photos from a Computer In Solution Menu, click One-Click to Photo Print . Easy-PhotoPrint EX allows you to print photos easily. Select the image you want to print, then click Layout/Print . Easy-PhotoPrint EX starts. When a photo is selected, the number of copies is set to " 1 "...

0 2 1 B A C D Send Faxes Press the FAX button (B). This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (A). Confirm that the fax standby screen is displayed. For other procedures to send faxes, refer to "Faxing" in the on-screen manual: Basic Guide ...

3 4 E F 5 D Insert the document until a beep sounds, then slide the left and right Paper Guides (D) against both ends of the document. Use the Numeric buttons (E) to enter the fax number. Press the Black button (F). The fax is sent. Place the document face-up. • For details on sender information, re...

A B After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a dry cloth as required. If the Scanning Unit (Cover) is left o...

Specifications Minimum System Requirements Conform to the operating system’s requirements when higher than those given here. Operating System Processor RAM Windows Vista, Vista SP1 1 GHz processor 512 MB Windows XP SP2, SP3 300 MHz processor 128 MB Windows 2000 Professional SP4 300 MHz processor 128...

QT5-2134-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN VIETNAM Email Tech Support — www.canontechsupport.com The following ink cartridges are compatible with this machine. Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holid...