Page 2 - After Installing the Machine; Contents; Additional explanations.; Downloaded from ManualsPrinter.com Manuals
S y m b o l s ■ The following symbols are used to mark important instructions. Observe these instructions. Model Number: K10332 (MX330) Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft is a registered trademark of Microsoft Corporation. • Window...
Page 3 - Preparation; power cord; Manuals; C h e c k t h e I n c l u d e d I t e m s; Choosing a Location; telephone line cable
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 Preparation Before turning on the machine, remove all the orange tapes and the protective sheets. power cord FINE cartridges Color Black A USB cable is necessary to connect the machine with your computer. • Manuals • Setup CD-ROM (containing the drivers, application...
Page 4 - Remove the Protective Material; Open the Paper Output
1 2 3 4 5 6 7 8 2 C E B D B A C 1 2 3 4 Remove the Protective Material Open the Paper Output Tray (A). Lift the Scanning Unit (Cover) (B) until it locks into place. Then, lift the Scanning Unit (Cover) (B) slightly and fold the Scanning Unit Support (C), then gently close the Scanning Unit (Cover) (...
Page 5 - Connect the Telephone Line; To use the machine as a fax, a telephone; Basic; Basic Guide; When using as a fax only:
1 2 3 4 5 6 7 8 B A 1 2 3 Connect the Telephone Line This section describes the basic method of telephone line connection. Connect the machine with a telephone line using the supplied telephone line cable (A). Do not connect the machine and a telephone in parallel to the same telephone line using a ...
Page 6 - Turn the Power On; Plug the power cord into the left side of; Use the; OK; Back; The standby screen is
4 2 1 1 2 1 2 3 4 5 6 7 8 CD B A 3 4 Turn the Power On Plug the power cord into the left side of the machine, then connect the other end to the wall outlet. Turn on the machine (A). Do NOT connect the USB cable at this stage. • Make sure that the Document Cover (B) is closed. • Use the { or } button...
Page 7 - Install the FINE Cartridges
1 2 3 4 5 6 7 8 E A D F 1 5 Install the FINE Cartridges Be sure to use the supplied FINE Cartridges. • Lift the Scanning Unit (Cover) (A) until it locks into place. Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • The Scanning Unit Support (E) is fixed automat...
Page 9 - View the Ink Cartridge Cover; Place the Black FINE Cartridge
1 2 3 4 5 6 7 8 6 5 Push down of the Ink Cartridge Locking Cover until you hear a click to close it completely. View the Ink Cartridge Cover straight on and check that it is locked correctly (not at an angle). Insert the Color FINE Cartridge into the left FINE Cartridge Holder in the same way. Place...
Page 11 - Set Up for Fax Reception; When you want to receive only faxes; When you want to switch the line
1 2 3 4 5 6 7 8 6 Set Up for Fax Reception Select a receive mode according to your needs to receive faxes easily. If you are not using the machine as a fax, go to "7 Install the Software" on page 11. When you want to receive only faxes (FAX only mode) When a call arrives: Voice call: You can...
Page 12 - FAX; The; screen is displayed.; Press the; Receive mode settings; screen is displayed.; button. When the FAX; The selected receive mode is displayed.
0 6 3 2 A B C D 1 2 3 4 5 6 7 8 1 Press the FAX button (A), then press the Menu button (B). The FAX menu screen is displayed. Press the OK button. The Receive mode settings screen is displayed. Use the { or } button (C) to select a receive mode, then press the OK button. When the FAX menu returns, p...
Page 13 - Install the Software
1 2 3 4 5 6 7 8 7 Install the Software Quit all running applications before installation. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.The screens below are based on Windows Vista operating system Ultim...
Page 14 - If the; Found New Hardware; or; Found New; Click; Cancel; to quit the dialog box.; The setup program should start automatically.; ON; Windows Vista
7 A 1 2 Windows Macintosh If the Found New Hardware or Found New Hardware Wizard dialog box appears: Click Cancel to quit the dialog box. Proceed from . Remove the USB cable connected to your computer. TURN OFF THE MACHINE (A). Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive...
Page 15 - AutoPlay; screen appears, click; User Account Control; dialog box appears, click; If the same dialog box reappears in subsequent steps, click; Continue
1 2 3 4 5 6 7 8 3 4 Windows Macintosh AutoPlay screen appears, click Run Msetup4.exe . User Account Control dialog box appears, click Continue . If the same dialog box reappears in subsequent steps, click Continue . Windows Vista Windows Vista Downloaded from ManualsPrinter.com Manuals
Page 16 - Install; Easy Install; Custom Install
7 6 5 Windows Macintosh Click Install . Move the cursor over items to display explanations. • Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically. If you want to select particular items to install, click Custom Install and follow the on- screen instr...
Page 17 - Read the; License Agreement; screen carefully and click; Yes; When the; Please Allow All Install Wizard Processes; Next
1 2 3 4 5 6 7 8 8 7 Windows Macintosh Read the License Agreement screen carefully and click Yes . During installation, follow any on-screen instructions to install the software. • When the Please Allow All Install Wizard Processes screen appears, click Next . Installation starts. Downloaded from Man...
Page 18 - Printer Connection; screen appears, connect the machine to; When the machine is recognized by the; Help
7 11 A 9 10 Windows Macintosh When the Printer Connection screen appears, connect the machine to the computer with a USB cable. The USB port is located on the back center of the machine. • Click Next . When the machine is recognized by the computer, a message appears on the screen. If installation d...
Page 19 - Canon Solution Menu; It may take a while for the next screen to appear.; Product Registration
1 2 3 4 5 6 7 8 Serial No. * * * * * * * * * 12 13 Windows Macintosh To register later, click Cancel . User registration can be started from the Canon Solution Menu icon. For details, refer to "Solution Menu" on page 26. • Click Next . If connected to the Internet, the user registration page...
Page 20 - Exit; check; Restart; Extended Survey Program; screen appears, confirm the; Agree; Program will not be installed.
7 15 14 Windows Macintosh Click Exit . If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart . When the Extended Survey Program screen appears, confirm the message. If you can agree, click Agree . If you click Do not agree , the Ex...
Page 21 - Connect the machine to the computer with a USB cable.; Make sure the machine is turned on.; Setup; Turn on the computer, then insert; If the CD-ROM folder does not open automatically, double-click the
1 2 3 4 5 6 7 8 2 3 1 7 Windows Macintosh Connect the machine to the computer with a USB cable. Make sure the machine is turned on. Double-click the Setup icon. Turn on the computer, then insert the Setup CD-ROM into the CD- ROM drive. If the CD-ROM folder does not open automatically, double-click t...
Page 22 - Enter your administrator name and password.; If you do not know your administrator name or password, click
0 7 4 5 Windows Macintosh Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically. If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation. • Enter your administrator ...
Page 23 - screen carefully and
1 2 3 4 5 6 7 8 8 6 7 Windows Macintosh Click Install . Move the cursor over items to display explanations. • Read the License Agreement screen carefully and click Yes . Installation starts. During installation, follow any on-screen instructions to install the software. • Click Next . If straight li...
Page 24 - Solution Menu
7 Serial No. * * * * * * * * * 9 10 Windows Macintosh Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your machine. You will need your product serial number, which is located on the inside of the machine. To register later,...
Page 25 - After restarting the computer, remove the; Applications; If you can agree, click; Survey Program will not be installed.
1 2 3 4 5 6 7 8 11 12 Windows Macintosh Click Restart . After restarting the computer, remove the Setup CD-ROM and keep it in a safe place. When using Mac OS X v.10.3.9, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator ...
Page 26 - Loading Paper; Slide the left and right Paper Guides; Load paper in portrait orientation with; Machine installation is now complete!; Confirm that the loaded paper does not; Load paper in the center.
8 B B C A B B 2 1 3 4 1 2 3 4 5 6 7 8 Loading Paper Open the Paper Support (A). Move the Paper Guides (B) to both edges. Slide the left and right Paper Guides (B) against both edges of the paper. Load paper in portrait orientation with the printing side facing up. For details on media sizes and type...
Page 27 - M a n u a l s; For proper use, read safety; o n - s c r e e n m a n u a l s; of machine. Also includes
After Installing the Machine M a n u a l s ■ Safety Precautions For proper use, read safety precautions before using the machine. S a f e t y a n d E n v i r o n m e n t I n f o r m a t i o n G e t t i n g S t a r t e d ( t h i s m a n u a l ) Describes how to set up and use your machine. Introduces...
Page 28 - S o l u t i o n M e n u; You can start Solution Menu from the; If you have a problem with machine settings, click the; Change settings or find solutions to; in Solution Menu to open; My Printer; *The buttons displayed vary depending on the
S o l u t i o n M e n u i s a g a t e w a y t o f u n c t i o n s a n d i n f o r m a t i o n t h a t a l l o w y o u t o m a k e f u l l u s e o f t h e m a c h i n e ! S o l u t i o n M e n u ■ Open various applications and on-screen manuals with a single click. You can start Solution Menu from th...
Page 29 - A l t e r n a t i v e l y, u s e t h e O p e r a t i o n P a n e l o n t h e; Tr y U s i n g t h e M a c h i n e !; s o f t w a r e a n d t h e m a c h i n e , r e f e r t o t h e o n -; B a s i c G u i d e
Va r i o u s a p p l i c a t i o n s o f t w a r e a r e i n s t a l l e d o n t h e c o m p u t e r a l o n g w i t h t h e d r i v e r s . Yo u c a n p r i n t c r e a t i v e i t e m s b y c o r r e c t i n g / e n h a n c i n g p h o t o s u s i n g t h e a p p l i c a t i o n s . A l t e r n a ...
Page 30 - Try Copying; This section explains with; Start; Load a sheet of A4 or Letter-; Plain Paper; Open the Document; COPY; the; Remove the document after printing.
B C Ａ E F A D 2 1 3 4 Try Copying This section explains with Plain Paper . For various copying procedures, refer to "Copying" in the on-screen manual: Basic Guide . For details, refer to "8 Loading Paper" on page 24. • You can copy a document by simply placing it on the Platen Glass ...
Page 31 - Print Photos from a Computer; In Solution Menu, click; to Photo Print; Easy-PhotoPrint EX allows you to print photos easily.; When a photo is selected, the number of; Load a sheet of photo paper in portrait; Load paper with the printing side facing up.; On Macintosh, if the; Print; screen is; Print; Advanced Guide; Photo Paper Plus Glossy II; . The screens are based on Windows Vista.
2 1 3 4 Print Photos from a Computer In Solution Menu, click One-Click to Photo Print . Easy-PhotoPrint EX allows you to print photos easily. Select the image you want to print, then click Layout/Print . Easy-PhotoPrint EX starts. When a photo is selected, the number of copies is set to " 1 "...
Page 32 - Send Faxes; This section explains how to send a fax; Confirm that the fax standby screen is displayed.; The setting may not be available depending on the
0 2 1 B A C D Send Faxes Press the FAX button (B). This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (A). Confirm that the fax standby screen is displayed. For other procedures to send faxes, refer to "Faxing" in the on-screen manual: Basic Guide ...
Page 33 - Black
3 4 E F 5 D Insert the document until a beep sounds, then slide the left and right Paper Guides (D) against both ends of the document. Use the Numeric buttons (E) to enter the fax number. Press the Black button (F). The fax is sent. Place the document face-up. • For details on sender information, re...
Page 34 - Maintenance
A B After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a dry cloth as required. If the Scanning Unit (Cover) is left o...
Page 35 - Specifications; Minimum System Requirements; Scan Specifications; Specifications are subject to change without notice.; Additional System Requirements for the on-screen
Specifications Minimum System Requirements Conform to the operating system’s requirements when higher than those given here. Operating System Processor RAM Windows Vista, Vista SP1 1 GHz processor 512 MB Windows XP SP2, SP3 300 MHz processor 128 MB Windows 2000 Professional SP4 300 MHz processor 128...
Page 36 - The following ink cartridges are compatible with this machine.; Getting Help from Canon
QT5-2134-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN VIETNAM Email Tech Support — www.canontechsupport.com The following ink cartridges are compatible with this machine. Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holid...
