Canon iP6210D - PIXMA Color Inkjet Printer- Manuals

Page 4 - Power supply; Input voltage / Frequency; External dimensions; Electromagnetic

(4/25) Power supply Input voltage / Frequency AC 100 to 240 V, 50/60Hz During printing Approx. 11 W Power consumption: Stand-by status Approx. 1 W External dimensions - With the paper support extended: Approx. 435 (W) x 280 (D) x 259 (H) mm - With the paper support retracted: Approx. 435 (W) x 253 (...

Page 9 - Note: The Status Monitor display in the table below is for Windows.

(9/25) 3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED)) Cycles of blinking in orange and green Error Corrective Action 2 times Carriage error [5100] Replace the printer as it has failed. 3 times Paper feed error [6000] Replace the printer as it has failed. 4 time...

Page 11 - Service mode operation procedures

(11/25) ＜ Service mode operation procedures ＞ 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3)...

Page 12 - At Operation panel unit replacement, check the button / LCD.

(12/25) <Destination setting procedures> At Logic board replacement, make settings for each destination. The number of the Reset button pressing LED Destination Paper for defaulte setting 0 time Green No change 1 time Orange Japan A4 2 times Green Korea A4 3 times Orange US Letter 4 times Gree...

Page 14 - Parts List

(14/25) Parts List Key Part Number Rank Q’ty Description Remark 1 QM2-3324-000 I 1 PAPER SUPPORT ASS’Y QC1-7539-000 J 1 TOP COVER US/CA/ASA HVT/AU/GP 2 QC1-7540-000 J 1 TOP COVER EUM/EMB/GB 3 QM2-3327-000 J 1 OPERATION PANEL UNIT 4 QL2-1280-000 J 1 CARD SLOT COVER ASS’Y 5 QC1-7531-000 J 1 HEAD ACCES...

Page 17 - SPECIAL NOTES ON SERVICING; ) Make marks under red screws located at both sides of the chassis.

(17/25) 7. SPECIAL NOTES ON SERVICING 7-1. Notes on the Waste Ink Absorber (for absorbing waste ink when doing borderless printing) Replacement. After the waste ink absorber shown below was replaced, check if head-to-paper distance between the chassis and platen is correct. Because the chassis and p...

Page 20 - (4) Remaining ink level detection function

(20/25) 8-2. Major Functions (1) New Direct Print function - Red eye correction: The red eyes area is selected from an image, and the red eyes are detected automatically. Correction is made at the detected area. - Memory card writing function: From the Menu, Setting of Read only (writing is not poss...

Page 23 - APPENDIX 1: SHIPMENT INSPECTION PATTERN 1; USB serial number; use

(23/25) APPENDIX 1: SHIPMENT INSPECTION PATTERN 1 <EEPROM information contents> On the service test print (sample below), confirm the EEPROM information as shown below. (The information is given in the upper portion of the printout.) Pxxxxx xxx Vx.xx USB(xxxxxx) Dd=xxx.x FA=xx xx xx <Print ...

Page 24 - APPENDIX 2: EEPROM INFORMATION PRINT

(24/25) APPENDIX 2: EEPROM INFORMATION PRINT <How to read EEPROM information print> Print sample: iP6210D KOR V1.00 IF(USB2=1) D=008.0 Ds 000.0 ST=2005/06/25-16:41 ER(ER0=1000 ER1=5100) LPT=2006/07/04-10:25 PC(M=000 R=000 T=011 D=000 C=000) CLT(2005/06/30-11:34) CT(Photo=002 CL_HC=002 CL_ST=00...