Canon iP6210D - PIXMA Color Inkjet Printer- User Manual
Canon iP6210D - PIXMA Color Inkjet Printer– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Power supply; Input voltage / Frequency; External dimensions; Electromagnetic
- Page 9 – Note: The Status Monitor display in the table below is for Windows.
- Page 11 – Service mode operation procedures
- Page 12 – At Operation panel unit replacement, check the button / LCD.
- Page 14 – Parts List
- Page 17 – SPECIAL NOTES ON SERVICING; ) Make marks under red screws located at both sides of the chassis.
- Page 20 – (4) Remaining ink level detection function
- Page 23 – APPENDIX 1: SHIPMENT INSPECTION PATTERN 1; USB serial number; use
- Page 24 – APPENDIX 2: EEPROM INFORMATION PRINT
PIXMA iP6210D
SERVICE
MANUAL
Canon
Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which
shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
(4/25) Power supply Input voltage / Frequency AC 100 to 240 V, 50/60Hz During printing Approx. 11 W Power consumption: Stand-by status Approx. 1 W External dimensions - With the paper support extended: Approx. 435 (W) x 280 (D) x 259 (H) mm - With the paper support retracted: Approx. 435 (W) x 253 (...
(9/25) 3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED)) Cycles of blinking in orange and green Error Corrective Action 2 times Carriage error [5100] Replace the printer as it has failed. 3 times Paper feed error [6000] Replace the printer as it has failed. 4 time...
(11/25) < Service mode operation procedures > 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3)...