Avaya G350 - Manuals

About this book Overview Installation of the G350 Media Gateway 9 December 2003 About this book Overview The Avaya G350 Media Gateway Installation Guide describes how to: • Physically install the Avaya G350 Media Gateway. • Establish connectivity to a remote installation technician, if necessary. • ...

About this bookSafety labels and security alert labels 10 Installation of the G350 Media Gateway December 2003 4 Scroll down to find the latest issue number, and then click the book title that is to the right of the latest issue number. 5 On the next page, scroll down and click one of the following ...

About this book Related resources Installation of the G350 Media Gateway 11 December 2003 Related resources For more information on the Avaya G350 Media Gateway and related features, see the following books: Technical assistance Avaya provides the following resources for technical assistance. Within...

About this bookSending us comments 12 Installation of the G350 Media Gateway December 2003 Sending us comments Avaya welcomes your comments about this book. To reach us by: • Mail, send your comments to: Avaya Inc. Product Documentation Group Room B3-H13 1300 W. 120 Ave. Westminster, CO 80234 USA • ...

Before you start Installation workflows Installation of the G350 Media Gateway 13 December 2003 1 Before you start Read this chapter carefully before you begin the installation. This chapter includes: • Installation workflows • Gathering information • Unpacking • Site requirements • Required equipme...

Before you startGathering information 14 Installation of the G350 Media Gateway December 2003 Staging If you are using this guide to take you through staging the G350, work through the guide as follows: 1 Read Step 2: Install the media modules on page 23, and install the media modules in the G350 ch...

Before you start Unpacking Installation of the G350 Media Gateway 15 December 2003 Unpacking The G350 chassis and accessories are shipped in a box. The package should contain the following items: • One empty Avaya G350 Media Gateway chassis, with blanking plates over empty module slots. • One access...

Before you startSite requirements 16 Installation of the G350 Media Gateway December 2003 Site requirements Inspect the site before you begin the installation. Verify that the site requirements have been met for adequate environmental conditions, power and grounding availability, safety, and securit...

Before you start Required equipment Installation of the G350 Media Gateway 17 December 2003 Required equipment You need the following equipment to assist you in the installation: • One loop start analog trunk for connecting a modem. • A separate telephone line for speaking to the service technician....

Installing the Avaya G350 Media Gateway Step 1: Mount the G350 chassis Installation of the G350 Media Gateway 19 December 2003 2 Installing the Avaya G350 Media Gateway This chapter describes the physical installation. Perform the following steps in order: 1 Step 1: Mount the G350 chassis 2 Step 2: ...

Installing the Avaya G350 Media GatewayStep 1: Mount the G350 chassis 22 Installation of the G350 Media Gateway December 2003 At this point, you have mounted the G350 chassis in the rack and are ready to insert media modules as required in the planning documentation. Mounting the G350 on a wall To m...

Installing the Avaya G350 Media Gateway Step 2: Install the media modules Installation of the G350 Media Gateway 23 December 2003 Step 2: Install the media modules When the G350 chassis is installed, you can insert the media modules. Each module is shipped with two thumb screws for securing the posi...

Installing the Avaya G350 Media Gateway Step 2: Install the media modules Installation of the G350 Media Gateway 25 December 2003 Inserting the S8300 Media Server module CAUTION: Hold media modules only by the edges to avoid damage from static electricity. Do not touch the top or bottom of the circu...

Installing the Avaya G350 Media GatewayStep 2: Install the media modules 26 Installation of the G350 Media Gateway December 2003 5 Apply firm pressure to engage the connectors. The connector has different length pins. The long pins will engage first to provide grounding. Medium length and short pins...

Installing the Avaya G350 Media GatewayStep 3: Attach ground conductors 28 Installation of the G350 Media Gateway December 2003 General grounding requirements Two safety grounds are required to ensure safe operation of the G350 Media Gateway: the ground conductor that is part of the AC power cord an...

Installing the Avaya G350 Media Gateway Step 3: Attach ground conductors Installation of the G350 Media Gateway 29 December 2003 Approved grounds An approved ground is the closest acceptable medium for grounding the building entrance protector, entrance cable shield, or a single-point ground of elec...

Installing the Avaya G350 Media GatewayStep 3: Attach ground conductors 30 Installation of the G350 Media Gateway December 2003 Connect the safety ground Proper grounding of the G350 Media Gateway installation safeguards the system, users and service personnel by providing protection from lightning,...

Installing the Avaya G350 Media Gateway Step 4: Connect power to the G350 Installation of the G350 Media Gateway 31 December 2003 Step 4: Connect power to the G350 After you have mounted the G350, installed the media modules, and attached grounding conductors, you can connect power to the G350. To c...

Preparing for configuration Step 1: Prepare configuration equipment Installation of the G350 Media Gateway 33 December 2003 3 Preparing for configuration The configuration of the G350 will be performed by one or more supporting technicians either remotely or on-site. This chapter explains what prepa...

Preparing for configuration Step 1: Prepare configuration equipment Installation of the G350 Media Gateway 37 December 2003 The G350 is now prepared for remote configuration via the USB modem. See Step 2: Assist the configuration on page 40) for information about how you will need to assist the supp...

Preparing for configurationStep 2: Assist the configuration 40 Installation of the G350 Media Gateway December 2003 Step 2: Assist the configuration The configuration may be done in any of the following ways: • Remotely: both your telephone and data services are configured by a remote technician. • ...

Connecting devices Step 1: Connect the network Installation of the G350 Media Gateway 43 December 2003 4 Connecting devices This chapter describes how to connect all external endpoint devices to the G350. Devices can be connected to the ports on the front panels of the installed media modules and to...

Connecting devicesStep 2: Connect IP telephones 44 Installation of the G350 Media Gateway December 2003 You can connect either a LAN switch or a network data port, via a network cable, to any of the following: • The ETH LAN port on the G350 front panel. • The Gigabit Ethernet port on an MM314 media ...

Connecting devices Step 3: Connect non-IP telephones and trunks Installation of the G350 Media Gateway 45 December 2003 Step 3: Connect non-IP telephones and trunks This section describes how to connect analog and DCP telephones and analog and T1/E1 trunks to the G350. Connecting an analog telephone...

Connecting devicesStep 3: Connect non-IP telephones and trunks 46 Installation of the G350 Media Gateway December 2003 Connecting a DCP telephone This section explains how to connect a DCP telephone. ! WARNING: The ports on the DCP media modules are intended for in-building use only. Phone lines con...

Connecting devices Step 3: Connect non-IP telephones and trunks Installation of the G350 Media Gateway 47 December 2003 Connecting an analog trunk To connect an analog trunk: 1 Connect the trunk to one of the following ports: — An analog trunk port on an MM711 or MM714 media module. — The TRUNK port...

Connecting devicesStep 3: Connect non-IP telephones and trunks 48 Installation of the G350 Media Gateway December 2003 Connecting an ISDN BRI trunk To connect an ISDN BRI trunk: 1 Connect the trunk to any ISDN port on an MM720 or MM722 media module. NOTE: In the US, you need to connect a separately ...

Connecting devices Step 4: Install circuit protection Installation of the G350 Media Gateway 49 December 2003 Step 4: Install circuit protection Over-voltage and sneak fuse protection measures are necessary for the safe operation of the G350 Media Gateway system. Over-Voltage and Sneak-Current Prote...

Connecting devicesStep 5: Connect to the Wide Area Network (WAN) 50 Installation of the G350 Media Gateway December 2003 Step 5: Connect to the Wide Area Network (WAN) Since the G350 contains an internal router, you can connect the G350 directly to a WAN endpoint device. You can also connect a WAN e...

Connecting devices Step 6: Install the Coupled Bonding Conductor Installation of the G350 Media Gateway 51 December 2003 Connecting an external router to the G350 You can connect a router to any of the following ports on the G350: • the ETH WAN port on the G350 front panel. • the ETH LAN port on the...

After installation Step 1: Test the installation Installation of the G350 Media Gateway 53 December 2003 5 After installation When the supporting technician has finished the remote configuration, perform the following steps: • Step 1: Test the installation • Step 2: Remove the installation equipment...

After installationStep 2: Remove the installation equipment 54 Installation of the G350 Media Gateway December 2003 LSP failover testing If you have an S8300 media server module installed in the G350 and configured as an LSP, you need to perform a test to make sure that the LSP takes over control of...

Technical specifications G350 Media Gateway specifications Installation of the G350 Media Gateway 55 December 2003 A Technical specifications This appendix provides technical specifications for the G350 and for compatible power cords. G350 Media Gateway specifications The table of technical specific...

Index A Installation of the G350 Media Gateway 57 December 2003 Index A After installation overview , 53 testing the installation , 53 Analog telephone, connecting , 45 Analog trunk, connecting , 47 Avaya Partner Contact Closure Adjunct , 52 B Before installation environmental verification , 16 grou...