Avaya 1600 - Manuals - manualsarea.com

Page 2 - Table of contents; PARTNER ACS 1600 DSL module basics

Avaya, Inc. - i - PARTNER ACS 1600 DSL module User Guide Table of contents 1. Introduction ...................................................................11 Organization of this guide ..................................................... 11 2. PARTNER ACS 1600 DSL module basics ....................

Page 9 - Router configuration

Avaya, Inc. - viii - PARTNER ACS 1600 DSL module User Guide Configuring the congestion parameters ......................... 123 Configuring the voice path .................................................. 124 Setting the jitter delay .................................................... 124 Setting ...

Page 10 - DHCP server configuration

Avaya, Inc. - ix - PARTNER ACS 1600 DSL module User Guide Enabling STP ...................................................................... 148 Enabling STP globally .................................................... 148 Enabling STP by port ..................................................... ...

Page 11 - B. PARTNER ACS 1600 DSL module specifications; Which Hardware Protocol?; Glossary

Avaya, Inc. - x - PARTNER ACS 1600 DSL module User Guide B. PARTNER ACS 1600 DSL module specifications .....186 C. Connector pinouts ......................................................188 D. USI Cables ...................................................................190 DTE or DCE? ...............

Page 12 - The Avaya PARTNER

Avaya, Inc. - 11 - PARTNER ACS 1600 DSL module User Guide 1. Introduction The Avaya PARTNER ä Advanced Communications System(ACS) 1600 DSL module allows you to simultaneouslytransport both voice and data services over a DSL, without thecost of additional lines. The PARTNER ACS 1600 DSL module suppor...

Page 14 - basics; Connectors; Console cable; Available interfaces include the following:

Avaya, Inc. - 13 - PARTNER ACS 1600 DSL module User Guide 2. PARTNER ACS 1600 DSL module basics This chapter describes the PARTNER ACS 1600 DSL modulehardware and software requirements, as well as the physicalIAD. Hardware andsoftwarerequirements You must use a terminal emulation program, such asHyp...

Page 15 - Front View

Avaya, Inc. - 14 - PARTNER ACS 1600 DSL module User Guide Front View DSL Line EthernetLAN Console V.35 PARTNER Power LED

Page 16 - Getting started; Connecting; PARTNER User Guide; Logging on; A terminal emulation program through the console port.

Avaya, Inc. - 15 - PARTNER ACS 1600 DSL module User Guide 3. Getting started This chapter walks you through the procedures to connectand log on to the PARTNER ACS 1600 DSL module. It alsoprovides information about the Menu interface, restarting thePARTNER ACS 1600 DSL module, auto log off, exiting t...

Page 17 - Using a terminal emulation program; Main Menu

Avaya, Inc. - 16 - PARTNER ACS 1600 DSL module User Guide Using a terminal emulation program To use a terminal emulation program to log on to a PARTNERACS 1600 DSL module 1. Open the terminal emulation program. 2. Select the name, icon and COM port for the PARTNERACS 1600 DSL module connection. 3. T...

Page 18 - Using a Telnet program; before; Configuring a port IP address

Avaya, Inc. - 17 - PARTNER ACS 1600 DSL module User Guide 8. Configure Login 9. System Utilities D. Configure DHCP Server N. Configure NAT T. Derived Timing Z. Diagnostics Menu C. Command Line Interface P. VoicePath Configure For more information on the menus, submenus andcommands on the Main Menu ,...

Page 19 - Configure Port IP Address

Avaya, Inc. - 18 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure Port IP Address . The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the IADin us...

Page 21 - Menu interface; User; Default values; Enter a new subnet mask for this interface:; Restarting

Avaya, Inc. - 20 - PARTNER ACS 1600 DSL module User Guide The User ID and password transmit as "clear text", which canbe captured by unauthorized individuals. If you are concernedwith network security, you may not want to use a Telnetprogram to configure the PARTNER ACS 1600 DSL module. Menu...

Page 22 - Auto Log off

Avaya, Inc. - 21 - PARTNER ACS 1600 DSL module User Guide Auto Log off After three minutes of inactivity, the PARTNER ACS 1600DSL module automatically logs off. To restart, you must log on to the system again. This doesnot affect routing functionality - network traffic continues toprocess. For more ...

Page 23 - The PARTNER ACS 1600 DSL module; On the; The; Reports Menu; Select; Display Current Configuration

Avaya, Inc. - 22 - PARTNER ACS 1600 DSL module User Guide The PARTNER ACS 1600 DSL module To verify the IP address of the PARTNER ACS 1600 DSLmodule: 1. On the Main Menu , select Reports Menu . The Reports Menu displays. ***************************************** * Reports Menu * ********************...

Page 24 - contains following submenus.

Avaya, Inc. - 23 - PARTNER ACS 1600 DSL module User Guide 4. Menu interface This chapter provides information on the PARTNER ACS1600 DSL module menus, submenus, and commands. Menus, submenus, and commands that display on the MainMenu depend on the access level that you use to log on or theoptions th...

Page 25 - C. Display Current Configuration

Avaya, Inc. - 24 - PARTNER ACS 1600 DSL module User Guide 1. ReportsMenu The Reports Menu contains the following submenus and commands. C. Display Current Configuration Displays the following configuration settings and informationabout the installed Interfaces. Information may or may not display, de...

Page 27 - N. Display Network Statistics

Avaya, Inc. - 26 - PARTNER ACS 1600 DSL module User Guide o ID – host ID. o IPAddr - IP Addresses for the ID (maximum = 8). o IPMask - number of bits reserved for the host ID (maximum = 8). o Priority – normal or high. o Ethernet address – Ethernet for the Interface. o Full duplex – enabled or disab...

Page 28 - Clear Statistics; M. Display Media Statistics; Media Statistics

Avaya, Inc. - 27 - PARTNER ACS 1600 DSL module User Guide Z. Clear a Statistic Displays the Clear Statistics submenu, which contains the following commands: A. Clear ARP StatisticsI. Clear Interface StatisticsB. Clear Bridge StatisticsD. Clear Frame Relay DLCI Statistics Select your choice. **You mu...

Page 29 - R. Display Route Table

Avaya, Inc. - 28 - PARTNER ACS 1600 DSL module User Guide R. Display Route Table Displays the following information about statically configuredroutes and dynamically learned ones: • NETWORK ADDRESS - destination address. • NETMASK - IP subnet mask; number of bits reserved for the host ID. • GATEWAY ...

Page 30 - S. Display Bridge status

Avaya, Inc. - 29 - PARTNER ACS 1600 DSL module User Guide S. Display Bridge status Displays the following information about bridging: • interface - interface for the active slot for bridging. • PORT - port for the preceding interface. • Spanning Tree Protocol (STP) - enabled or disabled. • STATE - S...

Page 31 - Router Configuration Menu; contains the following; Routing

Avaya, Inc. - 30 - PARTNER ACS 1600 DSL module User Guide 2. Configure IPRouter The Router Configuration Menu contains the following submenus and commands. You must restart the PARTNER ACS 1600 DSL module forany changes to take effect. For more information, see the“PARTNER ACS 1600 DSL module basics...

Page 32 - C. Configure Port IP Address; Router Modification Menu

Avaya, Inc. - 31 - PARTNER ACS 1600 DSL module User Guide C. Configure Port IP Address Sets the IP address and subnet mask for the selectedinterface. Type the number of the Interface, the number of the port orconnection to configure, and then enter the following: • New IP address • New subnet mask •...

Page 33 - V. Configure RIP Version by Port

Avaya, Inc. - 32 - PARTNER ACS 1600 DSL module User Guide T. Remove the Default Route Deletes the default static route from the Route Table.Type the IP address to remove, and then pressENTER. D. Display Route Table Displays the following information about staticallyconfigured routes and dynamically ...

Page 34 - N. Configure DNS Client

Avaya, Inc. - 33 - PARTNER ACS 1600 DSL module User Guide N. Configure DNS Client Displays the DNS Client Menu , which contains the following commands to configure the Domain Name Server (DNS)client: A. Set DNS Server IP Address Sets the IP address of the DNS Server. Type the DNSServer IP address, a...

Page 35 - S. Display DHCP Relay Statistics; T. Configure Telnet Server Port; IP Filtering Configuration Menu

Avaya, Inc. - 34 - PARTNER ACS 1600 DSL module User Guide S. Display DHCP Relay Statistics Displays the following information about the DHCPRelay: • DHCP client requests forwarded to DHCP server • DHCP client requests dropped • Server responses forwarded to DHCP clients • Server responses dropped • ...

Page 40 - D. Display Route Table; reserved for the host ID.

Avaya, Inc. - 39 - PARTNER ACS 1600 DSL module User Guide D. Display Route Table Displays the following information about statically configuredroutes and dynamically learned ones: • NETWORK ADDRESS - destination address. • NETMASK - IP subnet mask; number of bits reserved for the host ID. • GATEWAY ...

Page 41 - Displays the; Bridge Configuration Menu; following submenu and commands.; Bridging

Avaya, Inc. - 40 - PARTNER ACS 1600 DSL module User Guide 3. ConfigureBridge Displays the Bridge Configuration Menu , which contains the following submenu and commands. Main Menu Using spanning tree? Assigning bridge priority? Define bridge priority Define root bridge Enable bridging globally End En...

Page 42 - Your settings display in the; command in the; Enables and disables bridging for all installed interfaces.; A. Configure Bridge Aging Timer

Avaya, Inc. - 41 - PARTNER ACS 1600 DSL module User Guide Your settings display in the Display Current Configuration command in the Reports Menu . For more information, see "Reports Menu" earlier in this chapter. You must enable bridging both globally and by port number,and then restart the ...

Page 43 - priority on the network as the Root Bridge.; Q. Configure Spanning Tree Port Priority; The spanning tree algorithm uses the; spanning tree bridge; to determine which bridge to use as the Ethernet LAN; H. Configure Spanning Tree Hello Time

Avaya, Inc. - 42 - PARTNER ACS 1600 DSL module User Guide The Spanning Tree algorithm selects the bridge with thelowest priority on the network as the Root Bridge. Q. Configure Spanning Tree Port Priority Sets the Spanning Tree priority by port, a value between 0-255 (default = 128). The lower the v...

Page 44 - D. Delete Bridge Forwarding Database Entry

Avaya, Inc. - 43 - PARTNER ACS 1600 DSL module User Guide The PARTNER ACS 1600 DSL module displays a default orlast-used value in parentheses to the left of the commandprompt. To accept this value, press ENTER. When there are multiple paths to the Root Bridge, theSpanning Tree algorithm selects the ...

Page 45 - WAN Configuration Menu; SDSL WAN

Avaya, Inc. - 44 - PARTNER ACS 1600 DSL module User Guide 5. ConfigureWAN Displays the WAN Configuration Menu , which contains the following submenu and commands. Commands may or maynot display, depending on the datalink protocol that you selectand the Interface installed. SDSL Module Changing facto...

Page 46 - Quick Configuration; Configure Datalink Protocol; WAN Datalink Protocol Configuration Menu

Avaya, Inc. - 45 - PARTNER ACS 1600 DSL module User Guide 0. Quick Configuration Displays the Quick Configuration submenu, which contains the following commands to quickly configure the NetEnginePARTNER ACS 1600 DSL module . 1. Lucent Stinger (Conexant Autobaud, Payload Scrambling) 2. Nokia (Auto Cy...

Page 47 - Configure Physical Interface

Avaya, Inc. - 46 - PARTNER ACS 1600 DSL module User Guide 2. Configure Physical Interface Configure Physical Interface submenus and commands may or may not display, depending on the Interface that youselect. Universal Serial Interface (USI) Mode Displays USI Configuration Menu , which contains the f...

Page 48 - Displays

Avaya, Inc. - 47 - PARTNER ACS 1600 DSL module User Guide SDSL Mode Displays SDSL Configuration submenu , which contains the following commands to set the SDSL mode or speed. The PARTNER ACS 1600 DSL module displays a default orlast-used value in parentheses to the left of the commandprompt. To acce...

Page 50 - Configure Receive CIR; Receive Committed Information Rate; Configuration; submenu, which contains the; Set Fragmentation Size

Avaya, Inc. - 49 - PARTNER ACS 1600 DSL module User Guide 2. Configure Receive CIR Follow the on-screen messages to enter thefollowing information. Questions below may ornot display, depending on the options that youselect. • Receive Committed Information Rate (CIR) • Committed burst size (Bc) • Cir...

Page 53 - ATM Service Category Configuration

Avaya, Inc. - 52 - PARTNER ACS 1600 DSL module User Guide 2. AAL0 (None) Displays the ATM Service Category Configuration submenu, which contains the following commands toset the service category: 1. CBR2. UBR Select your choice, and then follow the on-screenmessages to set the PCR value. 3. Propriet...

Page 59 - LAN Configuration Menu; SNMP; Enables and disables SNMP.; P. Configure System Contact

Avaya, Inc. - 58 - PARTNER ACS 1600 DSL module User Guide You must restart the PARTNER ACS 1600 DSL module forany changes to take effect. For more information onrestarting the PARTNER ACS 1600 DSL module, see the“PARTNER ACS 1600 DSL module basics” chapter. 6. ConfigureLAN Displays the LAN Configura...

Page 60 - C. Configure SNMP Community; Password Configuration Menu; Change User Password

Avaya, Inc. - 59 - PARTNER ACS 1600 DSL module User Guide C. Configure SNMP Community Sets the SNMP community to which your device belongs(maximum = 39 alphanumeric characters). This name mustmatch the name of the SNMP host. Type the name, and thenpress ENTER. If SNMP you enable and the Community Na...

Page 61 - Utilities Menu

Avaya, Inc. - 60 - PARTNER ACS 1600 DSL module User Guide 9. SystemUtilities Displays the Utilities Menu , which contains the following submenus and commands that either upgrade the ACOSsoftware or support ACOS application development. Except for Ping Utility and Trace Route , these commands are onl...

Page 62 - Z. Configure Console Baud Rate; Switches to the factory default configuration.; W. Save System Settings as Defaults; Saves the current system settings as the default configuration.; File System Menu; , which contains the following; D. Directory of all Files

Avaya, Inc. - 61 - PARTNER ACS 1600 DSL module User Guide Z. Configure Console Baud Rate Displays the following commands to set the console Baudrate: 0. Unset (use Default)1. 96002. 192003. 384004. 576005. 115200 Select your choice. V. Configure Console Timeout Sets the console timeout, a value betw...

Page 63 - Deletes the entered file from the file system.; X. File Transfer Menu

Avaya, Inc. - 62 - PARTNER ACS 1600 DSL module User Guide R. Rename File Replaces the old file name with a new one. Type theold file name, and then type the new one. X. Remove File by name Deletes the entered file from the file system. F. Format File System drive Deletes all files in the file system...

Page 64 - X. Update Entire System; Add Interworking Connection

Avaya, Inc. - 63 - PARTNER ACS 1600 DSL module User Guide You must restart the PARTNER ACS 1600 DSLmodule to load the new version of ACOS. For moreinformation on restarting the PARTNER ACS 1600 DSLmodule or on upgrading your software using TFTP, seethe “PARTNER ACS 1600 DSL module basics”chapter. X....

Page 65 - Available interworking types

Avaya, Inc. - 64 - PARTNER ACS 1600 DSL module User Guide The Available interworking types menu displays, which contains the following commands and submenus that create aFrame Relay to ATM Interworking connection: 1. FRF5 Displays the FRF.5 DE Mapping submenu, which contains the following commands t...

Page 66 - M. Map FR FECN to ATM EFCI; Delete Interworking Connection; Type

Avaya, Inc. - 65 - PARTNER ACS 1600 DSL module User Guide M. Map FR FECN to ATM EFCI Displays the FRF.8 FECN Mapping menu, which contains the following commands to setthe FECN mapping value: 0. Always 01. Always 1M. Map FR FECN to ATM EFCI F. False Displays the FRF.8 DE Mapping menu, which contains ...

Page 67 - ATM Slot; Default Interworking Connections; DHCP Server Configuration Menu; I. Configure DHCP Server Parameters

Avaya, Inc. - 66 - PARTNER ACS 1600 DSL module User Guide • ATM Slot - ATM slot number for this ID. • VPI - the ATM virtual path identifier (VPI) for this ID. • VCI - the virtual circuit identifier (VCI) for this ID. For more information about a connection, type the ID number,and then press ENTER. 4...

Page 68 - NetBIOS Type Configuration Menu; P. Configure DHCP Address Range Pool; Display DHCP Entry Details

Avaya, Inc. - 67 - PARTNER ACS 1600 DSL module User Guide The NetBIOS Type Configuration Menu displays, which contains the following commands to set the NetBIOS nodetype: 1. B-node 2. P-node 4. M-node 8. H-node Select your choice. The PARTNER ACS 1600 DSL module displays a default orlast-used value ...

Page 69 - F. Display DHCP Configuration

Avaya, Inc. - 68 - PARTNER ACS 1600 DSL module User Guide F. Display DHCP Configuration Displays the following information about the DHCPconfiguration: • Default gateway - IP address of packets sent to DHCP Clients. • Default DNS server - IP address of the DNS server. • Default NetBIOS server - IP a...

Page 70 - A. Display DHCP Server Assigned Addresses

Avaya, Inc. - 69 - PARTNER ACS 1600 DSL module User Guide • nacks sent • requests for other servers • protocol errors For the preceding to display, you must attach DHCP Clientdevices that use DHCP to obtain an IP address to thePARTNER ACS 1600 DSL module. A. Display DHCP Server Assigned Addresses Di...

Page 71 - Y. Delete a DHCP Assignment Entry; Deletes an assigned IP address from the; Display DHCP; command. Type the IP; NAT; Enables and disables NAT debugging messages.; P. Enable/Disable NAT Translation by Port

Avaya, Inc. - 70 - PARTNER ACS 1600 DSL module User Guide Y. Delete a DHCP Assignment Entry Deletes an assigned IP address from the Display DHCP Server Assigned Addresses command. Type the IP address to delete, and then press ENTER. N. ConfigureNAT Displays the NAT Configuration Menu , which contain...

Page 72 - N. Configure NAT Local Server Entry

Avaya, Inc. - 71 - PARTNER ACS 1600 DSL module User Guide the number connections. Since the range that you assignmust be outside the range of the programs in use, do not setport ranges under 5,000. Type the Low End of NAT Port Range value, the High End ofNAT Port Range value, and then press ENTER. N...

Page 73 - C. Display NAT Connection Table

Avaya, Inc. - 72 - PARTNER ACS 1600 DSL module User Guide C. Display NAT Connection Table Displays the following information about the NAT connections: • TCP - Ethernet MAC address of the device. • out_port • pkts - out, in • state • idle D. Display NAT Connection Details Displays the following info...

Page 74 - Y. Delete NAT Local Server Entry

Avaya, Inc. - 73 - PARTNER ACS 1600 DSL module User Guide Y. Delete NAT Local Server Entry Deletes an NAT Local Server entry from the Display NAT Statistics , Display NAT Connection Table and Display NAT Connection Details commands. Type the Local Server entry to delete, and then press ENTER. T. Der...

Page 76 - Command line syntax

Avaya, Inc. - 75 - PARTNER ACS 1600 DSL module User Guide C. CommandLine Interface For future implementation. Displays the command line interface, which supports thefollowing syntax and commands. Command line syntax The command syntax is: COMMAND <required parameters> (optional parameters) For...

Page 78 - relative transit time; Ri; D. Display Jitter Delay; SLIC Control Mode Selection

Avaya, Inc. - 77 - PARTNER ACS 1600 DSL module User Guide As shown in the equation below, this is equivalent to thedifference in the "relative transit time" for two packets: the relative transit time is the difference between a packet's RTP time-stamp and the receivers clock at the time of a...

Page 79 - E. Configure Echo Cancellation Default Settings

Avaya, Inc. - 78 - PARTNER ACS 1600 DSL module User Guide M. Set Debug Mode Displays the Debug Mode Selection submenu, which contains the following commands. E. ENABLE Debug D. DISABLE Debug Select your choice. E. Configure Echo Cancellation Default Settings Displays the Echo Cancellation Default Se...

Page 80 - MGCP/NCS Management Menu; the following submenus and commands.; MGCP Debug menu; R. Remove a connection

Avaya, Inc. - 79 - PARTNER ACS 1600 DSL module User Guide M. ManageMGCP/NCSEmbeddedClient Displays the MGCP/NCS Management Menu , which contains the following submenus and commands. C. Configure MGCP/NCS parameters Sets the MGCP/NCS parameters. Type the followinginformation, and then press ENTER: ••...

Page 83 - Call Control Settings

Avaya, Inc. - 82 - PARTNER ACS 1600 DSL module User Guide E. Call ControlSettings Displays the Call Control Settings submenu, which contains the following commands: A. Stats Display Displays the following statistical information: •••• WAN RX PKTS •••• WAN RX BYTES •••• WAN TX PKTS •••• WAN TX BYTES ...

Page 84 - D. Display Parameters

Avaya, Inc. - 83 - PARTNER ACS 1600 DSL module User Guide D. Display Parameters Displays the following information about the Ring Test: •••• Port •••• On hook time •••• Off hook time S. Start Ring Test Starts the Ring test. T. Stop Ring Test Stops the Ring test. Select your choice. S. Display IAD St...

Page 85 - V. Pick sound heard if insufficient WAN B/W to; Insufficient Bandwidth Indication Setting; Set Client IP address

Avaya, Inc. - 84 - PARTNER ACS 1600 DSL module User Guide •••• Cc Port (16 total) V. Pick sound heard if insufficient WAN B/W to complete call Displays Insufficient Bandwidth Indication Setting submenu, which contains the following commands: 0. Play Silence 1. Play Fast Beeping Select your choice. U...

Page 86 - Tollbridge Debugging Options

Avaya, Inc. - 85 - PARTNER ACS 1600 DSL module User Guide 3. Debugging options Displays the Tollbridge Debugging Options submenu, which contains the following commands to enable or disableTollbridge debugging messages: 0. Enable/Disable all messages1. Enable/Disable status/keep-alive messages2. Enab...

Page 87 - Security; Access Level

Avaya, Inc. - 86 - PARTNER ACS 1600 DSL module User Guide 5. Administration This chapter provides information about the PARTNER ACS1600 DSL module security, as well as how to configure theSimple Network Management Protocol (SNMP) and upgradeACOS. For more information on the menus, submenus andcomman...

Page 88 - Changing the User ID; Changing the Password

Avaya, Inc. - 87 - PARTNER ACS 1600 DSL module User Guide Changing the User ID To change the User ID: 1. On the Main Menu , select Configure Login . The Password Configuration Menu displays. ******************************************* * Password Configuration Menu * *********************************...

Page 90 - Enabling/disabling SNMP; Configuring the System Contact; Configure SNMP

Avaya, Inc. - 89 - PARTNER ACS 1600 DSL module User Guide Enabling/disabling SNMP To enable or disable SNMP: 1. On the Main Menu, select Configure SNMP . The SNMP Configuration Menu displays. ***************************************** * SNMP Configuration Menu * **************************************...

Page 91 - Configure System Contact; Configuring the System Name

Avaya, Inc. - 90 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure System Contact . The following instructions display on-screen: System Contact is currently: Enter new System Contact > 3. Type the name of the SNMP contact person (maximum =39 alphanumeric characters) or press ENTER to ...

Page 92 - Configuring the System Location

Avaya, Inc. - 91 - PARTNER ACS 1600 DSL module User Guide Configuring the System Location To configure the system location: 1. On the Main Menu, select Configure SNMP . The SNMP Configuration Menu displays. 2. Select Configure System Location . The following instructions display on-screen: System Lo...

Page 93 - Configuring the System Community; To configure the system community:; SNMP Configuration Menu; Configure SNMP Community; The following instructions display on-screen:

Avaya, Inc. - 92 - PARTNER ACS 1600 DSL module User Guide Configuring the System Community The value that you set must match the write community nameof the SNMP host to enable the SNMP Set operation. If youenable SNMP but the community name is not set, SNMP goesinto read-only mode. To configure the ...

Page 94 - Configuring the SNMP Trap Host IP Address; To configure the SNMPP Trap Host IP Address:; Configure SNMP Trap Host IP Address

Avaya, Inc. - 93 - PARTNER ACS 1600 DSL module User Guide Configuring the SNMP Trap Host IP Address To configure the SNMPP Trap Host IP Address: 1. On the Main Menu, select Configure SNMP . The SNMP Configuration Menu displays. ***************************************** * SNMP Configuration Menu * **...

Page 95 - Configuring the TFTP Server; To configure the TFTP Server:; Using TFTP; Log on to the menu interface.

Avaya, Inc. - 94 - PARTNER ACS 1600 DSL module User Guide Configuring the TFTP Server To configure the TFTP Server: Copy the following files to a directory on your PC, in thepath that the TFTP Server will use to send files to thePARTNER ACS 1600 DSL module: acos.bin release.dat boot.bin callcontrol....

Page 97 - Using Telnet; To verify that the file downloaded successfully

Avaya, Inc. - 96 - PARTNER ACS 1600 DSL module User Guide Using Telnet To upgrade the PARTNER ACS 1600 DSL module softwareusing TFTP via Telnet: 1. Use a Telnet program to connect to the PARTNER ACS1600 DSL module. For more information, see the "Getting started" chapter. 2. Follow the proced...

Page 98 - Directory of all files

Avaya, Inc. - 97 - PARTNER ACS 1600 DSL module User Guide 3. Select Directory of all files . A list of all installed files displays. UpgradingACOS You can use the Trivial File Transfer Protocol (TFTP) toupgrade the PARTNER ACS 1600 DSL module software. Touse TFTP to upgrade, you must properly config...

Page 99 - On the Main Menu, select; System Utilities; File Transfer Menu

Avaya, Inc. - 98 - PARTNER ACS 1600 DSL module User Guide N. Configure NAT T. Derived Timing Z. Diagnostics Menu C. Command Line Interface P. VoicePath Configure For more information, see the "Getting Started" chapter. 2. On the Main Menu, select System Utilities . The Utilities Menu display...

Page 100 - File Transfer Method; Receive via TFTP

Avaya, Inc. - 99 - PARTNER ACS 1600 DSL module User Guide 4. Select Update ACOS [acos.bin] . The File Transfer Method submenu displays. ***************************************** * File Transfer Method * ***************************************** 1. Receive via TFTP 2. Receive via XMODEM 5. Select Rec...

Page 101 - A list of all installed files displays.; Support

Avaya, Inc. - 100 - PARTNER ACS 1600 DSL module User Guide R. Hard Reset or Reload ACOS from FLASH D. Set System Defaults W. Save System Settings as Defaults F. File System Menu X. File Transfer Menu 2. Select File System Menu . The File System Menu displays. ****************************************...

Page 103 - * WAN Datalink Protocol Configuration Menu*

Avaya, Inc. - 102 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure Datalink Protocol . The WAN Datalink Protocol Configuration Menu displays. ******************************************* * WAN Datalink Protocol Configuration Menu* ******************************************* Current DataLi...

Page 104 - Configuring the SDSL Interface

Avaya, Inc. - 103 - PARTNER ACS 1600 DSL module User Guide Configuring the SDSL Interface To configure the SDSL interface: 1. On the Main Menu , select Configure WAN . The following instructions display on-screen: Available WAN Interfaces: 1. SDSL 3. Universal Serial 0. (Abort) Enter slot number of ...

Page 105 - Configuring the USI interface; To configure the USI interface:

Avaya, Inc. - 104 - PARTNER ACS 1600 DSL module User Guide 6. Set SDSL to AccessLan CPE Mode 7. Set SDSL Speed Manually 8. Restart SDSL Activation Sequence 9. SDSL Interface Mode (Bit Order) A. Enable/Disable SDSL AutoBaud Debug Messages D. Enable/Disable SDSL Debug Messages Y. Enable/Disable Sync M...

Page 106 - Configure Datalink Protocol; Configure Physical Interface; USI Configuration

Avaya, Inc. - 105 - PARTNER ACS 1600 DSL module User Guide 3. Select Configure Datalink Protocol . The WAN Datalink Protocol Configuration Menu displays. ******************************************* * WAN Datalink Protocol Configuration Menu* ******************************************* Current DataLi...

Page 110 - Adding a PVC; ATM PVC Config Menu

Avaya, Inc. - 109 - PARTNER ACS 1600 DSL module User Guide Delete PVC Show Current PVCs You can configure up to 24 PVCs on the PARTNER ACS1600 DSL module. Adding a PVC To add a PVC: 1. On the Main Menu , select Configure WAN , and then type the slot number of the WAN interface that you want toconfig...

Page 111 - Modifying a PVC

Avaya, Inc. - 110 - PARTNER ACS 1600 DSL module User Guide 6. Select the encapsulation you want to configure. If you select RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364 (PPPoATM using VC Muxing) , follow the on-screen messages to set the PPP authorization type. Once complete, continue with ...

Page 112 - ATM Encapsulation Configuration; CBR

Avaya, Inc. - 111 - PARTNER ACS 1600 DSL module User Guide 6. Type a VCI between 32 – 65535 (default = 38 – data or 39– voice), and then press ENTER. The ATM Encapsulation Configuration submenu displays. ***************************************** * ATM Encapsulation Configuration * ******************...

Page 113 - Deleting a PVC

Avaya, Inc. - 112 - PARTNER ACS 1600 DSL module User Guide Deleting a PVC To delete a PVC: 1. On the Main Menu , select Configure WAN , and then type the slot number of the WAN interface that you want toconfigure. The WAN Configuration Menu displays. 2. Select Configure PVCs . The ATM PVC Config Men...

Page 115 - Sending OAM Loopback

Avaya, Inc. - 114 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure ATM Options . The ATM Configuration Menu displays. ***************************************** * ATM Configuration Menu * ***************************************** 1. Configure Payload Scrambling 2. Configure F4 OAM VPI 3. ...

Page 116 - Configuring Empty Cells

Avaya, Inc. - 115 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure ATM Options . The ATM Configuration Menu displays. ***************************************** * ATM Configuration Menu * ***************************************** 1. Configure Payload Scrambling 2. Configure F4 OAM VPI 3. ...

Page 117 - Enter 1 for IDLE cells or 2 for UNASSIGNED; Adding a DLCI; FR DLCI Config Menu

Avaya, Inc. - 116 - PARTNER ACS 1600 DSL module User Guide Enter 1 for IDLE cells or 2 for UNASSIGNED cells: 4. Select your choice. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information onrestarting the PARTNER ACS 1600 DSL module, see the“Getting start...

Page 119 - Modifying a DLCI

Avaya, Inc. - 118 - PARTNER ACS 1600 DSL module User Guide Modifying a DLCI To modify a DLCI: 1. On the Main Menu , select Configure WAN , and then type the slot number of the WAN interface that you want toconfigure. The WAN Configuration Menu displays. 2. Select Configure DLCIs . The FR DLCI Config...

Page 120 - Deleting a DLCI

Avaya, Inc. - 119 - PARTNER ACS 1600 DSL module User Guide 6. Select the encapsulation method to use. The FR DLCI Options submenu displays. ***************************************** * FR DLCI Options * ***************************************** 1. Configure Transmit CIR 2. Configure Receive CIR 3. Co...

Page 121 - Show Current DLCIs; Configuring fragmentation; Frame Relay Options

Avaya, Inc. - 120 - PARTNER ACS 1600 DSL module User Guide 4. Show Current DLCIs 3. Select Delete DLCI . 4. Do one of the following: To delete the DLCI configuration, type y . To cancel the deletion, type n . You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more in...

Page 123 - Configuring the maintenance protocol

Avaya, Inc. - 122 - PARTNER ACS 1600 DSL module User Guide Configuring the maintenance protocol To configure the maintenance protocol: 1. On the Main Menu , select Configure WAN , and then type the slot number of the WAN interface that you want toconfigure. The WAN Configuration Menu displays. 2. Se...

Page 124 - Configuring the congestion parameters

Avaya, Inc. - 123 - PARTNER ACS 1600 DSL module User Guide Configuring the congestion parameters To configure the congestion parameters: 1. On the Main Menu , select Configure WAN , and then type the slot number of the WAN interface that you want toconfigure. The WAN Configuration Menu displays. 2. ...

Page 125 - Setting the jitter delay; VoicePath Configure

Avaya, Inc. - 124 - PARTNER ACS 1600 DSL module User Guide restarting the PARTNER ACS 1600 DSL module, see the“Getting started” chapter. Configuringthe voice path After you define the voice PVCs and DLCIs, you need toperform the following steps to configure the voice path: Set the jitter delay Set t...

Page 126 - Setting the SLIC Control Mode; To set the SLIC control mode:; Voice Configuration; Select SLIC Control Mode; Configuring Echo Cancellation

Avaya, Inc. - 125 - PARTNER ACS 1600 DSL module User Guide Setting the SLIC Control Mode To set the SLIC control mode: 1. On the Main Menu, select VoicePath Configure . The Voice Configuration submenu displays. ***************************************** * Voice Configuration * ***********************...

Page 129 - Configure IP addresses on the LAN and WAN ports

Avaya, Inc. - 128 - PARTNER ACS 1600 DSL module User Guide 7. Router configuration This chapter describes how to configure the PARTNER ACS1600 DSL module as a router. For more information on themenus, submenus and commands in this chapter, see the“Menu interface” chapter. A router is a network layer...

Page 130 - Configure IP Router

Avaya, Inc. - 129 - PARTNER ACS 1600 DSL module User Guide To configure an IP address: 1. On the Main Menu, select Configure IP Router . The Router Configuration Menu displays. ***************************************** * Router Configuration Menu * ***************************************** C. Config...

Page 131 - Enter new subnet mask for this interface:

Avaya, Inc. - 130 - PARTNER ACS 1600 DSL module User Guide 5. Type the new IP address, or press ENTER to select thecurrent IP address. The following instructions display on-screen: Current subnet mask = 0.0.0.0 Enter new subnet mask for this interface: 6. Type the new subnet mask address, or press E...

Page 132 - Enabling RIP poisoned reverse globally; To enable RIP poisoned reverse globally:

Avaya, Inc. - 131 - PARTNER ACS 1600 DSL module User Guide Enabling RIP poisoned reverse globally To enable RIP poisoned reverse globally: 1. On the Main Menu, select Configure IP Router . The Router Configuration Menu displays. ***************************************** * Router Configuration Menu *...

Page 133 - Enabling RIP poisoned reverse by port

Avaya, Inc. - 132 - PARTNER ACS 1600 DSL module User Guide Enabling RIP poisoned reverse by port To enable RIP poisoned reverse by port: 1. On the Main Menu, select Configure IP Router . The Router Configuration Menu displays. ***************************************** * Router Configuration Menu * *...

Page 134 - Setting the RIP version

Avaya, Inc. - 133 - PARTNER ACS 1600 DSL module User Guide 4. Type E . The Router Configuration Menu redisplays. 5. Repeat steps 1-3 for each port for which you want toenable RIP poisoned reverse. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information on...

Page 138 - Add/Change the Default Route; Disabling bridging globally; To disable bridging globally:; Configure Bridge

Avaya, Inc. - 137 - PARTNER ACS 1600 DSL module User Guide T. Remove the Default Route D. Display Route Table 3. Select Add/Change the Default Route . 4. Type the gateway address for the default route, pressENTER, and then type Y . The Router Modification Menu displays. You must restart the PARTNER ...

Page 139 - Enable/Disable Bridging Globally; Disabling bridging by port; To disable bridging by port:

Avaya, Inc. - 138 - PARTNER ACS 1600 DSL module User Guide C. Configure Spanning Tree Path Cost D. Delete Bridge Forwarding Database Entry 2. Select Enable/Disable Bridging Globally , and the type D . The Bridge Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL modulefor any c...

Page 140 - Enable/Disable Bridging by Port; Available Interfaces :; Disabling STP; Disabling STP globally

Avaya, Inc. - 139 - PARTNER ACS 1600 DSL module User Guide 2. Select Enable/Disable Bridging by Port . The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on the I...

Page 141 - Disabling STP by port

Avaya, Inc. - 140 - PARTNER ACS 1600 DSL module User Guide R. Configure Spanning Tree Bridge Priority Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost D. Del...

Page 142 - Enable/Disable Spanning Tree by Port

Avaya, Inc. - 141 - PARTNER ACS 1600 DSL module User Guide 2. Select Enable/Disable Spanning Tree by Port . The following instructions display on-screen: Available Interfaces : 1. SDSL 2. 10/100BaseT Ethernet 3. Universal Serial 0. (Abort) Selection : Interfaces may or may not display, depending on ...

Page 143 - Bridge configuration

Avaya, Inc. - 142 - PARTNER ACS 1600 DSL module User Guide 8. Bridge configuration This chapter describes how to configure the PARTNER ACS1600 DSL module as a bridge. For more information on themenus, submenus and commands in this chapter, see the“Menu interface” chapter. A bridge is a device that c...

Page 144 - Enabling bridging globally; To enable bridging globally:

Avaya, Inc. - 143 - PARTNER ACS 1600 DSL module User Guide EnablingBridging For bridging to work, you must enable bridging both globallyand by port, and then set the bridge aging timer. The order inwhich you perform the procedures is irrelevant. Enabling bridging globally To enable bridging globally...

Page 145 - Enabling bridging by port

Avaya, Inc. - 144 - PARTNER ACS 1600 DSL module User Guide Enabling bridging by port To enable bridging by port: 1. On the Main Menu, select Configure Bridge . The Bridge Configuration Menu displays. ***************************************** * Bridge Configuration Menu * ****************************...

Page 146 - Setting the bridge aging timer; bridge aging timer

Avaya, Inc. - 145 - PARTNER ACS 1600 DSL module User Guide 4. Repeat steps 1-3 for each port on which you want todisable bridging. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information onrestarting the PARTNER ACS 1600 DSL module, see the“Getting starte...

Page 147 - Disabling RIP poisoned reverse globally; To disable RIP poisoned reverse globally:

Avaya, Inc. - 146 - PARTNER ACS 1600 DSL module User Guide 4. Press any key. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information onrestarting the PARTNER ACS 1600 DSL module, see the“Getting started” chapter. Disabling RIPpoisonedreverse Conversely, f...

Page 148 - Disabling RIP poisoned reverse by port

Avaya, Inc. - 147 - PARTNER ACS 1600 DSL module User Guide Disabling RIP poisoned reverse by port To disable RIP poisoned reverse by port: 1. On the Main Menu, select Configure IP Router . The Router Configuration Menu displays. ***************************************** * Router Configuration Menu *...

Page 149 - Enabling STP; Enabling STP globally; To enable STP globally:

Avaya, Inc. - 148 - PARTNER ACS 1600 DSL module User Guide 5. Repeat steps 1-4 for each port for which you want todisable RIP poisoned reverse. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information onrestarting the PARTNER ACS 1600 DSL module, see the“G...

Page 150 - Enabling STP by port

Avaya, Inc. - 149 - PARTNER ACS 1600 DSL module User Guide 2. Select Enable/Disable Spanning Tree Globally , and the type E . The Bridge Configuration Menu redisplays. You must restart the PARTNER ACS 1600 DSL modulefor any changes to take effect. For more information onrestarting the PARTNER ACS 16...

Page 155 - NAT Configuration Menu

Avaya, Inc. - 154 - PARTNER ACS 1600 DSL module User Guide 4. Type the new translated IP address (range = 1-65535),and then press ENTER. The following instructions display on-screen: Current NAT Local Server Translated IP Address = 0.0.0.0 Enter new NAT Local Server Standard IP address: 5. Type the ...

Page 156 - Configuring a NAT TCP timeout; Configure NAT

Avaya, Inc. - 155 - PARTNER ACS 1600 DSL module User Guide Configuring a NAT TCP timeout To configure a NAT TCP timeout: 1. On the Main Menu, select Configure NAT . The NAT Configuration Menu displays. ***************************************** * NAT Configuration Menu * *****************************...

Page 157 - Configuring a NAT UDP timeout

Avaya, Inc. - 156 - PARTNER ACS 1600 DSL module User Guide Configuring a NAT UDP timeout To configure a NAT UDP timeout: 1. On the Main Menu, select Configure NAT . The NAT Configuration Menu displays. ***************************************** * NAT Configuration Menu * *****************************...

Page 159 - Configure NAT Port Range

Avaya, Inc. - 158 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure NAT Port Range . The following instructions display on-screen: Enter Low End of NAT Port Range (5000..65534): (50000) 3. Type the low end value (range = 5000-65534), and thenpress ENTER. The following instructions display...

Page 160 - DHCP server configuration; Configure the DHCP server parameters; Configure DHCP Server

Avaya, Inc. - 159 - PARTNER ACS 1600 DSL module User Guide 10. DHCP server configuration This chapter walks you through the steps required toconfigure the Dynamic Host Configuration Protocol (DHCP)server. For more information on the menus, submenus andcommands in this chapter, see the “Menu interfac...

Page 162 - Configure DHCP Server Parameters

Avaya, Inc. - 161 - PARTNER ACS 1600 DSL module User Guide 2. Select Configure DHCP Server Parameters . The following instructions display on-screen: Current Gateway address = 0.0.0.0 Enter new Gateway IP address: 3. Type the new gateway IP address, and then pressENTER. If there is no gateway availa...

Page 166 - Verification; POWER; indicator on the front panel lights

Avaya, Inc. - 165 - PARTNER ACS 1600 DSL module User Guide 11. Verification This chapter describes how to verify that the PARTNER ACS1600 DSL module operates properly after installation. It alsocovers maintenance, and how to display the currentconfiguration. Before you can test the voice capabilitie...

Page 167 - Maintenance

Avaya, Inc. - 166 - PARTNER ACS 1600 DSL module User Guide To test the PARTNER ACS 1600 DSL module: 1. Verify the WAN link status. 2. Pick up the telephone receiver on the PARTNER phoneand check for a dial tone If no dial tone is present, troubleshoot as necessary. 3. Repeat steps 2-3 for each provi...

Page 173 - USI

Avaya, Inc. - 172 - PARTNER ACS 1600 DSL module User Guide 4. IP-Plus compatible HDLC 5. PPP (over Raw HDLC) 0. None 1. PAP Client 2. PAP Server 3. CHAP Client 4. CHAP Server 6. ATM 7. Frame Relay 2. Configure Physical Interface USI 1. Set WAN interface type 1. RS-530 2. V.35 2. Configure Data Rate ...

Page 177 - Modify Existing PVC

Avaya, Inc. - 176 - PARTNER ACS 1600 DSL module User Guide 2. Modify Existing PVC 1. AAL55 (None) 1. CBR 2. UBR 2. AAL0 (None) 1. CBR 2. UBR 3. Proprietary Voice 4. RFC 1483 (using VC Muxing) 1. CBR 2. UBR 5. RFC 1483 (with LLC Encapsulation) 1. CBR 2. UBR 6. RFC 2364 (PPPoATM With LLC Encapsulation...

Page 181 - M. Map Fr FECN To ATM EFCI

Avaya, Inc. - 180 - PARTNER ACS 1600 DSL module User Guide I. InterworkingConnections 1. Add Interworking Connection 1. FRF5 0. Set FR-SSCS, ATM=0 A. Set FR-SSCS According To ATM B. Use Both FR-SSCS And ATM 1. Set FR-SSCS, ATM=1 A. Set FR-SSCS According To ATM B. Use Both FR-SSCS And ATM B. Use Both...

Page 184 - M. MANUAL Control Mode

Avaya, Inc. - 183 - PARTNER ACS 1600 DSL module User Guide S. SDSL Diagnostics P. Transmit Isolated Pulses 1. +3 level 2. +1 level 3. -1 level 4. -3 level 2. Continuous 2-level transmission 4. Continuous 4-level transmission L. Digital Far Loopback C. CommandLine Interface P. VoicePathConfigure V. S...

Page 187 - SDSL

Avaya, Inc. - 186 - PARTNER ACS 1600 DSL module User Guide B. PARTNER ACS 1600 DSL module specifications NetworkInterfaces 10/100BaseT Ethernet Shielded RJ-45 SDSL 2-Wire SDSL (Shielded RJ-11 Connector)Symmetrical data rates from 144 Kbps to 2.3 Mbps inincrements of 8 KbpsTransmission range: loop le...

Page 188 - Environmental; Operating Range: 0°C to 40°C

Avaya, Inc. - 187 - PARTNER ACS 1600 DSL module User Guide Frame Relay Eight Data-Link Connection Identifiers (DLCI) Multiprotocol encapsulation over Frame Relay (RFC1490) High-Level Data Link Control (HDLC) Cisco-compatible HDLC Point-to-Point (PPP) ManagementandConfiguration ASCII-based submenu In...

Page 189 - Console

Avaya, Inc. - 188 - PARTNER ACS 1600 DSL module User Guide C. Connector pinouts Console Pin Signal 1 Ground 2 Tx Data 3 Rx Data 10BaseTConnector Pin Signal 1 Tx+ 2 Tx- 3 Rx+ 4 NC 5 NC 6 Rx- 7 NC 8 NC 100BaseTConnector Pin Signal 1 Tx+ 2 Tx- 3 Rx+ 4 NC 5 NC 6 Rx- 7 NC 8 NC

Page 190 - Tip

Avaya, Inc. - 189 - PARTNER ACS 1600 DSL module User Guide SDSLConnector Pin Signal 1 N/C 2 Tip 3 Ring 4 N/C

Page 191 - Data Terminal Equipment; device transmits data on

Avaya, Inc. - 190 - PARTNER ACS 1600 DSL module User Guide D. USI Cables DTE or DCE? A Data Terminal Equipment (DTE) device transmits data on the transmit pin and receives data on the receive pin, while a Data Communication Equipment (DCE) device transmits data on the receive pin and receives data o...

Page 194 - Input; - Input packets are filtered after the network; Output; - Output packets are filtered before the network; Pass; - packet discarded. When output packets are

Avaya, Inc. - 193 - PARTNER ACS 1600 DSL module User Guide E. IP Filtering The following assumes that you have a working knowledge ofIP protocols. Filtering executes on the WAN port that you select. There aretwo different sets of filters and each filter maintains its ownstatistics: Input - Input pac...

Page 195 - Asymmetric Digital Subscriber Line.

Avaya, Inc. - 194 - PARTNER ACS 1600 DSL module User Guide Glossary 10/100BaseT 10-Mbps baseband Ethernet specification that usestwo pairs of twisted-pair cabling: one pair fortransmitting data and the other for receiving data.10/100BaseT has a distance limit of approximately100 meters per segment. ...

Page 200 - Index

Avaya, Inc. - 199 - PARTNER ACS 1600 DSL module User Guide Index 10 10/100BaseT, 184100BaseT, 18410BaseT ETHERNET, 176specifications, 176 A ACOS upgrading, 87upgrading using TELNET, 89 upgrading using TFTP, 87 Add a Static Route, 21Add Interworking Connection, 53 Add/Change Default Route, 21 Add/Rem...