Page 3 - Table of Contents; Browser connection
Camera Browser Interface Table of Contents | en 3 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Table of Contents 1 Browser connection 12 1.1 System requirements 12 1.2 Establishing the connection 13 1.2.1 Password protection in camera 13 1.3 Protected network 13 2 System Overvi...
Page 4 - Basic Mode
4 en | Table of Contents Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 5 Basic Mode 28 5.1 Device Access 28 5.1.1 Naming 28 5.1.2 Password 28 5.2 Date/Time 30 5.3 Network 31 5.4 Encoder 32 5.5 Audio 32 5.6 Recording 32 5.7 System Overview 32 6 Advanced G...
Page 5 - Camera
Camera Browser Interface Table of Contents | en 5 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 7.1.2 Company logo 39 7.1.3 Device logo 39 7.1.4 Show VCA metadata 39 7.1.5 Show VCA trajectories 39 7.1.6 Show overlay icons 40 7.1.7 Select video player 40 7.1.8 JPEG size, interval...
Page 6 - Encoder Settings
6 en | Table of Contents Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8.3.2 Mode ID 47 8.3.3 Copy mode to 47 8.3.4 Restore Mode Defaults 47 8.7 Color 52 8.7.1 White balance 52 8.8 ALC 53 8.8.1 Exposure/frame rate 53 8.8.2 Day/night 54 8.9 Enhance 55 8.9...
Page 7 - Recording
Camera Browser Interface Table of Contents | en 7 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10 Recording 67 10.1 Storage Management 69 10.1.1 Device manager 69 10.1.2 Recording media 69 10.1.3 Activating and configuring storage media 71 10.1.4 Formatting storage media 72 10....
Page 8 - Setting up VCA
8 en | Table of Contents Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 11.3.2 Name 83 11.3.3 Signal Ranges 83 11.3.4 Threshold 83 11.3.5 Sensitivity 83 11.4 Alarm E-Mail 84 11.4.1 Send alarm e-mail 84 11.4.2 Mail server IP address 84 11.4.3 SMTP user nam...
Page 9 - Network
Camera Browser Interface Table of Contents | en 9 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 13.2.1 Idle state 97 13.2.2 Operating mode 97 13.2.3 Relay follows 97 13.2.4 Relay name 97 13.2.5 Trigger relay 97 13.3 COM1 98 13.3.1 Serial port function 98 13.3.2 Camera ID 98 13.3...
Page 10 - Service
10 en | Table of Contents Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 14.1.22 Status 103 14.2 Advanced 104 14.2.1 SNMP 104 14.2.2 1. SNMP host address / 2. SNMP host address 104 14.2.3 SNMP traps 104 14.2.4 Authentication (802.1x) 105 14.2.5 RTSP port ...
Page 11 - System requirements; Security
12 en | Browser connection Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 1 Browser connection A computer with Microsoft Internet Explorer is used to receive live images from the camera, control the camera, and replay stored sequences. The camera is confi...
Page 12 - Establishing the connection; ON; Password protection in camera; OK; Protected network; Identity
Camera Browser Interface Browser connection | en 13 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 1.2 Establishing the connection The camera must have a valid IP address to operate on your network and a compatible subnet mask. By default, DHCP is pre-set at the factory to ON and...
Page 13 - System Overview; Livepage
14 en | System Over view Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 2 System Overview When a connection is established, the Livepage is initially displayed. The application title bar displays three items: LIVEPAGE , PLAYBACK , SETTINGS . Note: The PLA...
Page 14 - Operation via the browser; Image selection
Camera Browser Interface Operation via the browser | en 15 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 3 Operation via the browser 3.1 Livepage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser w...
Page 15 - Status icons
16 en | Operation via the browser Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3.1.2 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might sh...
Page 16 - Motion flag; Cameras with PTZ control; View Control
Camera Browser Interface Operation via the browser | en 17 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Motion flag Indicates that motion is dectected. Storage discovery Indicates that recorded video is being retrieved. 3.1.3 Cameras with PTZ control For cameras where PTZ contr...
Page 17 - Set; View Control ROI
18 en | Operation via the browser Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems Pre-position To move the camera to a pre-position, click one of the buttons numbered one to six. To store the current position of the camera in a pre-position: 1. Position th...
Page 18 - Cameras with alarm and relay I/O
Camera Browser Interface Operation via the browser | en 19 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Set positions To store the current view: 1. Select a region of interest. 2. Click Set . 3. Click a number. To display a pre-set region of interest, click one of the buttons n...
Page 19 - System Log / Event Log; System Log; Saving snapshots; Recording video sequences
20 en | Operation via the browser Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3.1.6 System Log / Event Log The System Log field contains information about the operating status of the camera and the connection. Events such as the triggering or the end o...
Page 20 - Running recording program; Audio communication; Processor load
Camera Browser Interface Operation via the browser | en 21 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 3.1.9 Running recording program The hard drive icon below the camera images on the Livepage changes during an automatic recording. The icon lights up and displays a moving gr...
Page 21 - Playback page; Selecting recordings for playback
22 en | Operation via the browser Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3.2 Playback page Click PLAYBACK to access the Playback page from the Livepage or Settings page. The Playback link is only visible if a direct iSCSI or SD card has been confi...
Page 22 - Exporting tracks; Any motion
Camera Browser Interface Operation via the browser | en 23 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 3.2.2 Exporting tracks 1. Select a track in the track list. 2. Click the export tab. 3. The start and stop time are filled-in for the selected track. If required, change the ...
Page 23 - Controlling playback; Time bar
24 en | Operation via the browser Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3.2.4 Controlling playback Time bar The time bar below the video image allows quick orientation. The time interval associated with the sequence is displayed in the bar in gra...
Page 24 - Bookmarks
Camera Browser Interface Operation via the browser | en 25 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Jump to start of active sequence or to previous sequence Jump to start of the next video sequence in the list Bookmarks You can set markers in a sequence and jump to these di...
Page 25 - Settings Overview; Configuration Menu
26 en | Set tings Overview Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 4 Settings Overview 4.1 Configuration Menu The settings page provides access to the configuration menu which contains all the unit's parameters arranged in groups. There are two opt...
Page 26 - Settings
Camera Browser Interface Set tings Overview | en 27 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 4.2 Settings Navigation To view the current settings: 1. Click the Basic Mode menu or the Advanced Mode menu to expand it. 2. For the Advanced Mode menu, click a menu sub-heading to...
Page 27 - Basic Mode; Device Access; Naming
28 en | Basic Mode Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 5 Basic Mode 5.1 Device Access 5.1.1 Naming Enter a unique name to assist in identification. This name simplifies the management of multiple devices in more extensive systems. The name is u...
Page 28 - Password
Camera Browser Interface Basic Mode | en 29 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Password Define or change a separate password for each level. Enter the password (19 characters maximum) for the selected level. Confirm password Re-enter the new password to ensure that th...
Page 31 - Encoder; On; Storage medium
32 en | Basic Mode Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 5.4 Encoder Select a profile for encoding the video signal on stream 1 (this is not a selection of the recording profile). Pre-programmed profiles are available that give priority to differ...
Page 32 - Advanced General Settings; Identification
Camera Browser Interface Advanced General Set tings | en 33 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 6 Advanced General Settings 6.1 Identification 6.1.1 Naming Assign a unique name to assist in identification. This name simplifies the management of multiple devices in more...
Page 34 - Date format; Sync to PC; Device time zone
Camera Browser Interface Advanced General Set tings | en 35 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 6.3 Date/Time 6.3.1 Date format Select the required date format. 6.3.2 Device date / Device time If there are multiple devices operating in your system or network, it is imp...
Page 35 - Time server IP address
36 en | Advanced General Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems First, check the time zone setting. If it is not correct, select the appropriate time zone for the system: 1. Click Set . 2. Click Details . A new window opens showing an em...
Page 36 - Display Stamping; Camera name stamping
Camera Browser Interface Advanced General Set tings | en 37 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 6.4 Display Stamping Various overlays or stamps in the video image provide important supplementary information. These overlays can be enabled individually and arranged on th...
Page 37 - Alarm message
38 en | Advanced General Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 6.4.5 Alarm message Enter the message to be displayed on the image in the event of an alarm. The maximum text length is 31 characters. 6.4.6 Video watermarking Select On in ...
Page 38 - Web Interface; Appearance; Website language
Camera Browser Interface Web Interface | en 39 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 7 Web Interface 7.1 Appearance You can adapt the appearance of the web interface and change the website language to meet your requirements. GIF or JPEG images can be used to replace the ...
Page 39 - Show overlay icons; Select video player; JPEG size, interval and quality
40 en | Web Interface Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 7.1.6 Show overlay icons When selected, the camera status icons are displayed as an overlay on the video images. 7.1.7 Select video player Select the player to be used for live mode view...
Page 40 - LIVEPAGE Functions; Transmit audio
Camera Browser Interface Web Interface | en 41 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 7.2 LIVEPAGE Functions You can adapt the Livepage functions to meet your requirements. Choose from a variety of different options for displaying information and controls. 1. Mark the che...
Page 41 - Allow snapshots
42 en | Web Interface Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 7.2.7 Allow snapshots Specify whether the icon for saving individual images should be displayed below the live image. Individual images can only be saved if this icon is visible. 7.2.8 A...
Page 42 - Logging; Save event log; File for event log; Save system log; File for system log
Camera Browser Interface Web Interface | en 43 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 7.3 Logging 7.3.1 Save event log Select this option to save event messages in a text file on the local computer. This file can be viewed, edited, and printed with any text editor or stan...
Page 43 - Installer Menu
44 en | Camera Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8 Camera 8.1 Installer Menu 8.1.1 Base frame rate Select 50 ips or 60 ips as the base frame rate for the camera. Note: Shutter times and frame rates are affected by this value. 8.1.2 Camera LED...
Page 44 - Lens Wizard; Default
Camera Browser Interface Camera | en 45 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 8.2 Lens Wizard A two-step procedure enables you to focus the lens on a particular area. Step 1: 1. Displays the lens type. 2. Allows you to set the back focus to obtain the widest adjustment r...
Page 45 - Mode menu; Current mode; Indoor
46 en | Camera Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8.3 Mode menu A mode is a set of image parameters that are set in the camera when that mode is selected (Installer menu settings are excluded). Six pre-defined modes are available for typical s...
Page 46 - Low light; Intelligent AE; Vibrant
Camera Browser Interface Camera | en 47 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Low light This mode is optimized for sufficient details at low light. It requires more bandwidth and can introduce motion judder. Intelligent AE (BLC when IVA is unavailable) This mode is optim...
Page 47 - Color; White balance
48 en | Camera Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8.4 Color Contrast (0...255) Adjust the contrast with the slider from 0 to 255. Saturation (0...255) Adjust the color saturation with the slider from 0 to 255. Brightness (0...255) Adjust the b...
Page 48 - ALC
Camera Browser Interface Camera | en 49 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 8.5 ALC ALC mode Select the mode: – Fluorescent 50 Hz – Fluorescent 60 Hz – Outdoor ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate...
Page 49 - Auto
50 en | Camera Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8.5.2 Day/night Auto - the camera switches the IR cut-off filter on and off depending on the scene illumination level. Color - the camera always produces a color signal regardless of light leve...
Page 50 - Enhance; Off
Camera Browser Interface Camera | en 51 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 8.6 Enhance 8.6.1 Sharpness level Adjusts the black level between -15 and +15. Zero position of slider corresponds to the factory default level. A low (negative) value makes the picture less sh...
Page 51 - Encoder Profile
52 en | Camera Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 8.7 Encoder Settings The Encoder Profile , Encoder Streams , and Encoder Regions settings allow you to adapt the video data transmission characteristics for your operating environment (network ...
Page 52 - Privacy Masks; Pixel Counter; Freeze
Camera Browser Interface Camera | en 53 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 8.8 Privacy Masks Four privacy mask areas can be defined. The activated masked areas are filled with the selected pattern in live view. 1. Select the pattern to be used for all masks. 2. Check ...
Page 54 - Changing a profile
60 en | Encoder Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 9.1 Encoder Profile Profiles are rather complex and include a number of parameters that interact with one another, so it is generally best to use the pre-defined profiles. Only chang...
Page 55 - Maximum bit rate
Camera Browser Interface Encoder Set tings | en 61 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 9.1.3 Profile name If required, enter a new name for the profile. 9.1.4 Target bit rate To optimize use of the bandwidth in the network, limit the data rate for the camera. The targe...
Page 56 - GOP structure
62 en | Encoder Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems GOP structure Select the structure you require for the Group of Pictures (GOP). Depending on whether you place greater priority on having the lowest possible delay (IP frames only) o...
Page 58 - Encoder Streams
64 en | Encoder Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 9.2 Encoder Streams 9.2.1 H.264 settings Select H.264 Settings 1. Select a codec algorithm Property for stream 1 from the drop-down box. 2. Select a codec algorithm Property for stre...
Page 59 - JPEG stream; Resolution
Camera Browser Interface Encoder Set tings | en 65 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 9.2.2 JPEG stream Set the parmeters for the M-JPEG stream. – Select the Resolution . – Select the Max. frame rate in images per second (IPS). – The Picture quality slider allows adju...
Page 60 - Encoder Regions; Regions; Expert Settings
66 en | Encoder Set tings Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 9.3 Encoder Regions 9.3.1 Regions 1. Select one of the eight available regions from the drop- down box. 2. Use the mouse to define the area for that region by dragging the center or ...
Page 61 - Recording 1
Camera Browser Interface Recording | en 67 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10 Recording Images can be recorded to an appropriately configured iSCSI system or, for cameras with SD slots, locally to an SD card. SD cards are the ideal solution for shorter storage time...
Page 62 - Storage Management; Device manager
68 en | Recording Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 10.1 Storage Management 10.1.1 Device manager Check the Managed by VRM box to let an external Video Recording Manager (VRM) manage all recording. No further settings can be configured. Note:...
Page 63 - Local Media
Camera Browser Interface Recording | en 69 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Local Media An SD card can be used for local recording in cameras with an SD slot. If the SD card is password protected, enter the password into the Password field. The Storage overview fi...
Page 64 - Activating and configuring storage media
70 en | Recording Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 10.1.3 Activating and configuring storage media Available media or iSCSI drives must be transferred to the Managed storage media list, activated, and configured for storage. Note: A iSCSI ta...
Page 65 - Formatting storage media
Camera Browser Interface Recording | en 71 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10.1.4 Formatting storage media All recordings on a storage medium can be deleted at any time. Check the recordings before deleting and back-up important sequences on the computer's hard dri...
Page 66 - Recording Profiles
72 en | Recording Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 10.2 Recording Profiles A recording profile contains the characteristics of the tracks that are used for recording. These characteristics can be defined for ten different profiles. The profi...
Page 67 - Recording track selection
Camera Browser Interface Recording | en 73 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10.2.1 Recording track selection Standard and alarm recording can be defined for the two recording tracks. You must first select the track before setting up the standard and alarm recording ...
Page 68 - Alarm recording; Retention Time
74 en | Recording Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 10.2.3 Alarm recording Select a period for the Pre-alarm time from the list box. Select a period for the Post-alarm time from the list box. Alarm stream Select the stream to be used for alar...
Page 69 - Recording Scheduler; Weekdays
Camera Browser Interface Recording | en 75 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded. Schedules can be def...
Page 70 - Profile names
76 en | Recording Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3. Click OK . The selection is removed from the table and the window is closed. 4. Repeat for any other dates to be deleted. 10.4.3 Profile names Change the names of the recording profiles l...
Page 71 - Recording Status
Camera Browser Interface Recording | en 77 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 10.5 Recording Status Details of the recording status are displayed here for information. These settings cannot be changed.
Page 72 - Alarm; Alarm Connections; Connect on alarm; Number of destination IP address
Camera Browser Interface Alarm | en 79 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 11 Alarm 11.1 Alarm Connections In the event of an alarm, the camera can automatically connect to a pre-defined IP address. The camera can contact up to ten IP addresses in the order listed unti...
Page 73 - Video transmission
80 en | Alarm Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3. Enter the password in the Destination password field. 4. Set the user password of all the remote stations to be accessed using this password. Setting destination 10 to the IP-address 0.0.0.0 ...
Page 74 - SSL encryption; Audio
Camera Browser Interface Alarm | en 81 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 11.1.10 SSL encryption SSL encryption protects data used for establishing a connection, such as the password. By selecting On , only encrypted ports are available for the Remote port parameter. ...
Page 76 - Audio Alarm; Audio alarm; Name
Camera Browser Interface Alarm | en 83 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 11.3 Audio Alarm Alarms can be generated based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or background noise, are avoided...
Page 77 - Mail server IP address; SMS; Image size
84 en | Alarm Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 11.4 Alarm E-Mail Alarm states can be documented by e-mail. The camera automatically sends an e-mail to a user-defined e-mail address. This makes it possible to notify a recipient who does not h...
Page 78 - Attach JPEG from camera; Send Now
Camera Browser Interface Alarm | en 85 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 11.4.7 Attach JPEG from camera Check the box to specify that JPEG images are sent from the camera. 11.4.8 Destination address Enter the e-mail address for alarm e-mails here. The maximum address...
Page 79 - Alarm Task Editor
86 en | Alarm Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 11.5 Alarm Task Editor Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. To edit this page, you should have programmin...
Page 81 - VCA configuration; Analysis type
88 en | Set ting up VCA Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 12.2 VCA - Profiles Two profiles can be set up with different VCA configurations. 1. In the VCA configuration drop-down list, select profile 1 or 2 and enter the required settings. 2. ...
Page 82 - Motion detector; Sensitivity
Camera Browser Interface Setting up VCA | en 89 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Note: Additional analysis algorithms with comprehensive functions, such as IVMD and IVA, are also available. Refer to the IVA documentation for more information on using these. 12.2.3 M...
Page 83 - Tamper detection
90 en | Set ting up VCA Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems Debounce time 1 s The debounce time prevents very brief alarm events from triggering individual alarms. If the Debounce time 1 s option is activated, an alarm event must last at least ...
Page 84 - Select Area
Camera Browser Interface Setting up VCA | en 91 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 reference image and the current video image. The darker the observation area, the higher the value that must be selected. Trigger delay [s] Set delayed alarm triggering here. The alarm ...
Page 88 - Deleting Holidays
Camera Browser Interface Setting up VCA | en 95 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Deleting Holidays Delete defined holidays at any time: 1. Click Delete . A new window opens. 2. Click the date to delete. 3. Click OK . The item is deleted from the table and the window...
Page 89 - VCA - Event triggered; Trigger; Silent VCA
96 en | Set ting up VCA Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 12.4 VCA - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event. In the VCA configuration dro...
Page 90 - Interfaces; Alarm input; LIVEPAGE; Relay; Open
Camera Browser Interface Interfaces | en 97 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 13 Interfaces 13.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the alarm is to be triggered by closing the contact. Select N.O. (Normally Open)...
Page 91 - Transparent
98 en | Interfaces Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 13.3 COM1 (only for cameras with a data connector) 13.3.1 Serial port function Select a controllable unit from the list. If you wish to use the serial port to transmit transparent data, sel...
Page 92 - Network Access; Automatic IP assignment
Camera Browser Interface Network | en 99 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14 Network 14.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Rebo...
Page 93 - IP V6 address; IP address; DNS server address
100 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 14.1.3 IP V6 address IP address Enter the desired IP address for the camera. The IP address must be valid for the network. Prefix length Enter the appropriate prefix length for the set IP add...
Page 94 - HTTPS browser port
Camera Browser Interface Network | en 101 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14.1.8 HTTPS browser port To limit browser access to encrypted connections, choose an HTTPS port from the list. The standard HTTPS port is 443. Select the Off option to deactivate HTTPS ports...
Page 96 - Register; Notification mail; Status
Camera Browser Interface Network | en 103 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 use this function when necessary and no more than once a day, to avoid the possibility of being blocked by the service provider. To transfer the IP address of the device, click the Register b...
Page 97 - Advanced; SNMP
104 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 14.2 Advanced The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the d...
Page 98 - RTSP port
Camera Browser Interface Network | en 105 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14.2.4 Authentication (802.1x) To configure Radius server authentication, connect the camera directly to a computer using a network cable. If a Radius server controls access rights over the n...
Page 99 - Mode
106 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems can set a higher priority than for regular video and you can define a Post Alarm Time over which this priority is maintained. 14.2.9 Cloud-based services The Mode determines how the camera co...
Page 100 - Multicast; Enable
Camera Browser Interface Network | en 107 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14.3 Multicast The camera can enable multiple receivers to receive the video signal simultaneously. The stream is either duplicated and then distributed to multiple receivers (Multi-unicast),...
Page 101 - Port
108 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems Duplication of data places a heavy demand on the CPU and can lead to impairment of the image quality under certain circumstances. 14.3.3 Port Enter the port address for the stream here. 14.3....
Page 102 - Image Posting; JPEG
Camera Browser Interface Network | en 109 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14.4 Image Posting A target account must first be defined to use JPEG and Best faces posting and for the export of recordings. 14.4.1 JPEG Send individual JPEG images to a target account at s...
Page 103 - Face detection
110 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 14.4.2 Face detection When face recognition is available, selected images of the face can be sent to a target account. Enable Check the box to enable best face posting. File format Select the...
Page 104 - Accounts
Camera Browser Interface Network | en 111 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 14.5 Accounts Four separate accounts can be defined for posting and recording export. Type Select either FTP or Dropbox for the account type. Account name Enter an account name to be shown as...
Page 105 - IP V4 filter
112 en | Network Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 14.6 IP V4 filter To restrict the range of IP addresses within which you can actively connect to the device, fill-in an IP address and mask. Two ranges can be defined. Click Set and confirm...
Page 106 - Maintenance; Update server; Check; Firmware
Camera Browser Interface Service | en 113 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 15 Service 15.1 Maintenance 15.1.1 Update server The address of the Bosch update server appears in the address box. 1. Click Check to make a connection to this server. 2. Select the appropria...
Page 107 - Configuration; Upload
114 en | Service Camera Browser Interface AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems 3. Click Upload to begin transferring the file to the device. The progress bar allows monitoring of the transfer. The new firmware is unpacked and the Flash memory is reprogrammed. The time r...
Page 108 - Maintenance log; Upload history; Download; Licenses
Camera Browser Interface Service | en 115 Bosch Security Systems Software manual AM18-Q0635 | v5.6 | 2013.01 Once all files have been successfully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.168.0.10/reset T...
