Page 3 - Table of Contents; Safety
IP Camera 200 Series Table of Contents | en 3 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Table of Contents 1 Safety 7 1.1 Safety precautions 7 1.2 Important safety instructions 8 1.3 FCC & ICES compliance 9 1.4 UL certification 10 1.5 Bosch notices 10 ...
Page 4 - Basic Mode
4 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 4.4.1 LIVEPAGE 29 4.4.2 RECORDINGS 29 4.4.3 SETTINGS 29 5 Basic Mode 31 5.1 Basic Mode menu tree 31 5.2 Device Access 32 5.2.1 Camera name 32 5.2.2 Password 32 5.3 Dat...
Page 5 - Operation via the browser
IP Camera 200 Series Table of Contents | en 5 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.5.2 Recording Profiles 59 6.5.3 Retention Time 61 6.5.4 Recording Scheduler 62 6.5.5 Recording Status 63 6.6 Alarm 64 6.6.1 Alarm Connections 64 6.6.2 Video Content ...
Page 6 - Troubleshooting
6 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 8 Troubleshooting 101 8.1 LED indicators 101 8.2 Resolving problems 101 8.3 Customer service 101 9 Maintenance 103 9.1 Repairs 103 9.1.1 Transfer and disposal 103 10 T...
Page 7 - Safety precautions
IP Camera 200 Series Safety | en 7 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 1 Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided,...
Page 8 - Important safety instructions; Controls adjustment -
8 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instr...
Page 9 - FCC & ICES compliance; FCC & ICES Information; FCC Rules; residential; How to Identify
IP Camera 200 Series Safety | en 9 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 1.3 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digita...
Page 10 - UL certification; Disclaimer; Circuit Television Equipment, UL 2044; Bosch notices; More information; European
10 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 1.4 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. ...
Page 11 - Copyrights
IP Camera 200 Series Safety | en 11 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 1.6 Copyrights The firmware 4.1 uses the fonts "Adobe-Helvetica-Bold-R- Normal--24-240-75-75-P-138-ISO10646-1" and "Adobe- Helvetica-Bold-R-Normal--12-120-75-75-P-70...
Page 13 - Introduction; Features; MicroSD/SDHC card slot supports edge recording up to 32 GB
IP Camera 200 Series Introduction | en 13 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 2 Introduction 2.1 Features This HD 720p IP camera is a ready-to-use, complete network video surveillance system inside a compact camera. The camera offers a cost-effectiv...
Page 14 - Unpacking
14 en | Introduction IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 2.2 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – IP camera with lens – Universal power supply with US, EU and UK plug – Install...
Page 15 - Installation; Disassembly
IP Camera 200 Series Installation | en 15 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3 Installation 3.1 Disassembly The camera/housing unit consists of the following parts: To disassemble the unit proceed as follows: 1. Using the special screwdriver bit su...
Page 16 - Disassemble the camera.
16 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 3.2 MicroSDHC card Figure 3.1 MicroSDHC card 1. Disassemble the camera. 2. Slide the microSDHC card into the slot. The camera supports most microSD/SDHC cards. microSDHC C...
Page 17 - Use a shielded UTP Category 5e cable with RJ45
IP Camera 200 Series Installation | en 17 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3.3 Network (and power) connector Figure 3.2 Network connection – Connect the camera to a 10/100 Base-T network. – Use a shielded UTP Category 5e cable with RJ45 connector...
Page 18 - Power connection
18 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 3.4 Power connection The camera can accept power from both the DC12V power input and the Ethernet input at the same time. You can remove either one of the power sources wi...
Page 19 - Function
IP Camera 200 Series Installation | en 19 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3.5 I/O connector Figure 3.4 I/O connector pins – Max. wire diameter AWG 22-28 for both stranded and solid; cut back 5 mm (0.2 in) of insulation. – Relay output switching ...
Page 20 - Connect audio devices to the; Line In; and; Line Out
20 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 3.6 Audio connectors Figure 3.5 Audio connectors Connect audio devices to the Line In and Line Out connectors. Line - R GND Line - L Line in: 9 kOhm typ., 200 mVrms Line o...
Page 21 - Mounting
IP Camera 200 Series Installation | en 21 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3.7 Mounting Figure 3.6 Mounting the camera To mount the camera to a wall or ceiling: 1. Stick the supplied installation paper sticker to the surface taking care to orient...
Page 22 - Camera positioning
22 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 3.8 Camera set-up To help set up the camera, connect a monitor to the miniature 2.5 mm jack socket using a S1460 monitor cable which can be ordered separately. This monito...
Page 23 - rotate
IP Camera 200 Series Installation | en 23 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Set the camera to the desired position by performing the following steps: 1. For horizontal adjustment (pan) , rotate the camera module in the base. Do not rotate more tha...
Page 24 - Focal length and focus
24 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 3.8.2 Focal length and focus Adjust the focal length and focus as follows: 1. Slide the focus aid onto the lens. 2. To set the field of view of the varifocal lens, loosen ...
Page 25 - Resetting the camera; Closing the unit
IP Camera 200 Series Installation | en 25 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3.9 Resetting the camera If the camera cannot be connected because the IP address has changed, press and hold the reset button (7 seconds approximately) until the LED flas...
Page 27 - Browser connection; System requirements; Security; Establishing the connection
IP Camera 200 Series Browser connection | en 27 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 4 Browser connection A computer with Microsoft Internet Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. Th...
Page 28 - Password protection in camera; OK; Protected network; Identity
28 en | Browser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems Note: If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configurati...
Page 29 - Connection established; LIVEPAGE
IP Camera 200 Series Browser connection | en 29 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 4.4 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application title bar displays the type number of the connected...
Page 30 - Basic; Section 5 Basic Mode, page 31; Advanced Mode
30 en | Browser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems the configuration menu is opened. All settings (except date/ time) are stored in the camera memory so that they are retained, even if the power is interrupted. Chang...
Page 31 - Basic Mode menu tree; Saving changes
IP Camera 200 Series Basic Mode | en 31 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 5 Basic Mode 5.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessa...
Page 32 - Device Access; Camera name
32 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 5.2 Device Access 5.2.1 Camera name The camera can be assigned a name to assist in identifying it. The name simplifies the management of multiple devices in more extensive s...
Page 33 - Confirm password
IP Camera 200 Series Basic Mode | en 33 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set . Therefore, click Set immediately ...
Page 34 - Network
34 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 5.4 Network Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set a...
Page 35 - Encoder; Storage medium; System Overview
IP Camera 200 Series Basic Mode | en 35 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 5.5 Encoder Select a profile for encoding the video signal. Pre-programmed profiles are available that give priority to different parameters. When a profile is selected, its...
Page 37 - Advanced Mode menu tree
IP Camera 200 Series Advanced Mode | en 37 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6 Advanced Mode 6.1 Advanced Mode menu tree The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. C...
Page 38 - General; Identification
38 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.2 General 6.2.1 Identification Camera ID Each camera should be assigned a unique identifier that can be entered here as an additional means of identification. Camera na...
Page 41 - Display Stamping
IP Camera 200 Series Advanced Mode | en 41 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 5. Click one of the entries in the table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the li...
Page 43 - Web Interface; Appearance; Website language
IP Camera 200 Series Advanced Mode | en 43 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.3 Web Interface 6.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necessary, replace the company'...
Page 44 - LIVEPAGE Functions
44 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.3.2 LIVEPAGE Functions In this window, adapt the Livepage functions to meet your requirements. Choose from a variety of different options for displaying information and...
Page 45 - Logging
IP Camera 200 Series Advanced Mode | en 45 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Allow snapshots Specify whether the icon for saving individual images should be displayed below the live image. Individual images can only be saved if this icon is visibl...
Page 46 - Camera; Picture Settings; White balance
46 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.4 Camera 6.4.1 Picture Settings Contrast (0...255) Adjusts the contrast of the image. Saturation (0...255) Adjusts the color saturation; 0 gives a monochrome image. Bri...
Page 47 - The blue gain adjustment offsets the factory white point; Click; Default; to set all video values to their factory setting.
IP Camera 200 Series Advanced Mode | en 47 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 B-gain The blue gain adjustment offsets the factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset fo...
Page 48 - Encoder Profile
48 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.4.2 Encoder Profile The camera generates up to four video streams simultaneously (quad streaming). Set the encoder profiles for these streams to match the operating env...
Page 51 - Auto
IP Camera 200 Series Advanced Mode | en 51 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image definition (fo...
Page 52 - Encoder Streams
52 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.4.3 Encoder Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2. Select the codec algorithm for stream 2. The foll...
Page 53 - Audio
IP Camera 200 Series Advanced Mode | en 53 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.4.4 Audio Select the microphone or line-in connector as the Audio input or switch it off. Adjust the Input volume with the slider. Switch the Audio output On or Off . S...
Page 54 - Installer Menu
54 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.4.5 Installer Menu Camera LED Disable the Camera LED on the camera to switch it off. Mirror image Enable Mirror image to obtain a vertically flipped image (around the h...
Page 55 - Recording; VRM
IP Camera 200 Series Advanced Mode | en 55 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.5 Recording Record the images from the camera to local storage media or to an appropriately configured iSCSI system. MicroSDHC cards are the ideal solution for shorter ...
Page 56 - Storage Management
56 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager If the VRM option is activated, the VRM Video ...
Page 59 - Recording Profiles
IP Camera 200 Series Advanced Mode | en 59 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.5.2 Recording Profiles Define up to ten different recording profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify ...
Page 61 - Retention Time; Recording 1
IP Camera 200 Series Advanced Mode | en 61 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.5.3 Retention Time Specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten if the ...
Page 62 - Recording Scheduler
62 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded ...
Page 63 - Recording Status
IP Camera 200 Series Advanced Mode | en 63 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Profile names To change the names of the recording profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename . 3. Enter the new name and click Rename a...
Page 64 - Alarm; Alarm Connections
64 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.6 Alarm 6.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined ...
Page 68 - VCA configuration- Profiles
68 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.6.3 VCA configuration- Profiles Configure two profiles with different VCA configurations. Save profiles on your computer's hard drive and load saved profiles from there...
Page 69 - Analysis type
IP Camera 200 Series Advanced Mode | en 69 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metada...
Page 74 - VCA configuration - Scheduled
74 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active...
Page 75 - . The item is deleted from the table and the
IP Camera 200 Series Advanced Mode | en 75 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.
Page 76 - VCA configuration - Event triggered; Trigger
76 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.6.5 VCA configuration - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event. A...
Page 77 - Audio Alarm
IP Camera 200 Series Advanced Mode | en 77 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.6.6 Audio Alarm Create alarms based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or background noi...
Page 79 - Destination address; Enter the e-mail address for alarm e-mails here. The maximum; Sender name; location of the device. This makes it easier to identify the origin; Send Now; immediately created and sent.
IP Camera 200 Series Advanced Mode | en 79 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, f...
Page 80 - Interfaces; Alarm input
80 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.7 Interfaces 6.7.1 Alarm input Configure the alarm trigger for the camera. Select N.C. (Normally Closed) if the alarm is to be triggered by opening the contact. Select ...
Page 82 - Network Access
82 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.8 Network 6.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set...
Page 86 - Advanced
86 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.8.2 Advanced The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and ...
Page 87 - Multicast
IP Camera 200 Series Advanced Mode | en 87 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function...
Page 88 - Enable
88 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP addresses and the Inte...
Page 89 - FTP Posting
IP Camera 200 Series Advanced Mode | en 89 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 6.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG...
Page 90 - Service; Maintenance; Firmware
90 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 6.9 Service 6.9.1 Maintenance Firmware The camera functions and parameters can be updated by uploading new firmware. To do this, the latest firmware package is transferre...
Page 92 - Maintenance log
92 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems Maintenance log Download an internal maintenance log from the device to send it to Customer Service for support purposes. Click Download and select a storage location for...
Page 93 - Processor load
IP Camera 200 Series Operation via the browser | en 93 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 7 Operation via the browser 7.1 Livepage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right ...
Page 94 - Image selection
94 en | Operation via the browser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 7.1.2 Image selection View the image on a full screen. – Click the Stream 1 , Stream 2 or M-JPEG tab below the video image to switch between the different dis...
Page 95 - System Log / Event Log; System Log
IP Camera 200 Series Operation via the browser | en 95 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 7.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed next to the camera image. The alarm symbol is...
Page 96 - Saving snapshots; Recording video sequences; Running recording program; Audio communication
96 en | Operation via the browser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 7.1.5 Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's h...
Page 97 - All connected users receive audio signals sent from the camera
IP Camera 200 Series Operation via the browser | en 97 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 All connected users receive audio signals sent from the camera but only the user who first pressed the F12 key can send audio signals; others must wait for th...
Page 98 - Recordings page; Controlling playback
98 en | Operation via the browser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 7.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a storage medium...
Page 99 - Slide control
IP Camera 200 Series Operation via the browser | en 99 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 The time bar offers various options for navigation in and between sequences. – Change the time interval displayed by clicking the plus or minus icons. The dis...
Page 101 - LED indicators; Power LED; Resolving problems; Malfunction
IP Camera 200 Series Troubleshooting | en 101 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 8 Troubleshooting 8.1 LED indicators The camera has LEDs on the front and the rear panel that show the operating status and can indicate possible malfunctions. Power L...
Page 102 - version numbers of the firmware and other status information; menu. Note down this information and the information found
102 en | Troubleshooting IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems version numbers of the firmware and other status information can be seen when the unit starts or by opening the Service menu. Note down this information and the inform...
Page 103 - Repairs; Transfer and disposal
IP Camera 200 Series Maintenance | en 103 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 9 Maintenance 9.1 Repairs 9.1.1 Transfer and disposal The camera should only be passed-on together with this installation guide. The unit contains environmentally hazardou...
Page 105 - Technical Data; Specifications
IP Camera 200 Series Technical Data | en 105 Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01 10 Technical Data 10.1 Specifications Input voltage +12 VDC or Power-over-Ethernet Power consumption 4.2 W (max) Sensor type ¼-inch CMOS Sensor pixels 1280 x 800 Sensit...
Page 106 - Accessories
106 en | Technical Data IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 Installation and Operation Manual Bosch Security Systems 10.1.1 Accessories Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Unit Configuration Via...
