Bosch MVM-BVRM - Manual

! Caution!For playback from within VRM Monitor you must have installed Video SDK V. 4.4x. Playbackdoes not work correctly with Video SDK V. 5.x. Video Streaming Gateway For integration of 3 rd party cameras Video Streaming Gateway provides an ONVIF interface. Additionally you can integrate 3 rd part...

Installation For system requirements and recommended Bosch server hardware see the data sheet forVideo Recording Manager in the Online Product Catalog on http://www.boschsecurity.com >Video > Management Systems > VRM - Video Recording Manager. (The navigation path issubject to change). VRM ...

Verifying installation The Video Recording Manager service is started automatically after installation and every timethe computer is started up.Follow the steps below to check that VRM Server has been installed correctly:1. Click Start > Control Panel. 2. Select Administrative Tools. 3. Select Co...

Licensing When you purchase VRM Video Recording Manager, you are provided with an authorizationnumber. This number can be found in an envelope that is included with the scope of deliveryor you receive it via e-mail.Using this number and the installation code that you can access via the Configuration...

Used icons VRM Server Failover VRM Server iSCSI storage device SaveClick to apply and save your changes. Online Help...Click to display the Online Help. Device is available. Device cannot be accessed.Devices that cannot be accessed, for example because the networkconnection has been interrupted, are...

Getting started The Configuration Manager program is used to set and adjust the VRM system. The programcan be installed on any PC with network access to the computer on which VRM Server hasbeen started and to the devices that are to be managed. Starting VRM Monitor 1. Start Internet Explorer on a PC...

Configuring a VRM system To configure a VRM system perform the following tasks:– Adding a VRM to the system, 14 – Managing iSCSI Systems, 14 – Allocating detected devices, 15 – Clearing device allocations, 16 – Creating groups of allocated devices, 16 – Allocating a device manually, 16 – Managing re...

The type of a LUN (standard/read-only/backup) is stored on the LUN itself, so if configurationis lost, the LUN can be added without risk of data loss. The correct type of the LUN is read outand is set correctly.1. Right-click an iSCSI system and click LUN Assignment... to add new LUNs. The LUN Assig...

i Notice!Only supported devices can be allocated.In the tree structure, these devices are marked with a red cross until they can be reached inthe network. Managing recording As soon as an encoder is added to the system, all necessary changes for management by theVRM system are usually carried out au...

Configuring Video Streaming Gateway This chapter contains descriptions of the tasks that you can perform to configure VideoStreaming Gateway.Not all tasks might be required for your system. i Notice!If you assign one camera to a Video Streaming Gateway repeatedly or assign this camera tomultiple Vid...

Configuring a failover server Main window > Devices tab > > General > VRM Settings tab VRM service is running on the master and on the failover server.Proceed as follows to configure a master and a failover server:1. Create a failover group and a failover user with corresponding password...

Managing user groups and permissions You create users and groups for configuring VRM and access to live video and recordings. Configuring users and user groups Main window > Devices tab > > General > User Management tab Creating a user groupTo create a user group:1. Click the Groups list...

Dual authorization (Security logon)VRM offers the option to create users who can only log on together according to the principleof dual authorization.To configure dual authorization:1. Create a user group for which the Dual authorization option is activated. 2. Create a user with password in this us...

Configuring Automated Network Replenishment Main window > Devices tab > Expand Devices > > Recording > Recording Management VRM supports Automated Network Replenishment (ANR) for devices with firmware version 4.0or above. ANR technology gives the VRM system optimum protection against ...

User interface This chapter contains information on all VRM related pages available inConfiguration Manager. i Notice!Detailed information about the configuration options for a device can be found in the relevantdevice documentation and the online Help in the relevant Web browser view. i Notice!Some...

Use as failover server / Master server IP address / PasswordYou can set up a computer as the master server, provided that VRM Server is started on it, andset up another computer as a failover server. The configuration settings of the master serverare then synchronized on the failover server. If the ...

Add...Click to display the User or Group dialog box. Edit...Click to display the User or Group dialog box. RemoveClick to display the Remove User or Remove Group dialog box. VRM Rights tabClick to configure rights for a selected user group. PasswordType in a password for the selected user. ConfirmCo...

Note: The values entered on the Load Balancing tab are only valid if the All or Restrictedoption is selected. Soft limitEnter a value smaller or equal to the value in the Hard limit field. If the values are notexceeded, data is written to the iSCSI device without internal reorganization. If they are...

LUN Assignment dialog box Main window > Devices tab > Expand > Expand Storage Systems > Expand iSCSI System Access > > Target Settings > LUN Assignment...Add individual LUNs to the system and configure them.You can add a backup LUN that has been used in another VRM system. If th...

The Recording preferences page is displayed for each encoder. This page only appears if adevice is assigned to a VRM system.Note: When you configure the automatic recording mode, you cannot configure any settingshere.VRM Settings tab, 26 ModeSelect the required option.– AllThe VRM system discovers a...

Entry in the Type list Available configuration settings NameDisplays the display name of the profile if ONVIF MediaProfile is selected. If multiple names are available,<multiple> is displayed. RTSP Select for adding a 3 rd party camera that supports the Real Time Streaming Protocol. JPEG Selec...

Index Numerics 3rd party camera, 20 A Activation key, 10add 3rd party camera, 20add Bosch camera, 19add ONVIF camera, 20add VSG, 19admin, 23ANR, 25, 31application windows, 26authentication, 15Authorization number, 10authorize, 15Automated Network Replenishment, 25automatic recording mode, 27, 33 C C...