Amtrol whs-series - Manual
Amtrol whs-series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY; IMPORTANT GENERAL SAFETY INFORMATION -; General Safety Information
- Page 3 – Heat Exchanger Pressure Drop; Required Components and Accessories Checklist
- Page 4 – Domestic Water Piping; Boiler Piping; Plumbing
- Page 5 – WHS Models
- Page 6 – Mechanical Aquastat Wiring Diagrams; Boiler Controls
- Page 7 – Startup Procedure; Warranty
PREMIER SERIES
™
INDIRECT-FIRED WATER HEATERS
INSTALLATION & OPERATION INSTRUCTIONS
WHS-Series (Mechanical Control)
DC-Series (Mechanical Control)
READ CAREFULLY THE PRODUCT
INSTALLATION & OPERATION INSTRUCTIONS.
FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE
MANUAL MAY RESULT IN SERIOUS OR FATAL INJURY AND/OR
PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY.
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED
PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE
CODES AND REGULATIONS, IN THE ABSENCE OF SUCH CODES,
FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING
CODE AND NATIONAL ELECTRIC CODE, AS APPLICABLE.
DO NOT LIFT OR CARRY WATER HEATER BY
THE TOP COVER. WATER HEATER DAMAGE OR
PERSONAL INJURY MAY OCCUR IF THE COVER BECOMES
DETACHED.
The heat transfer medium must be water or other
nontoxic fluid having a toxicity rating or class of
1, as listed in Clinical Toxicology of Commercial Products, 5th
edition. The pressure of the heat transfer medium must be limited to
30 PSIG by an approved safety or relief valve.
NOTE:
Inspect for shipping damage and notify freight carrier or store where purchased immediately if damage is present. To avoid risk of personal
injury and property damage, if the product appears to be malfunctioning or shows signs of corrosion, call a qualified professional immediately. Current
copies of the Product manual can be viewed at www.amtrol.com. Use proper safety equipment when installing.
THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER
HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL
INJURY AS WELL AS PROPERTY DAMAGE.
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
INSTALLER: LEAVE THIS MANUAL WITH THE OWNER.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY IMPORTANT GENERAL SAFETY INFORMATION - ADDITIONAL SPECIFIC SAFETY ALERTS APPEAR IN THE FOLLOWING INSTRUCTIONS. THIS PRODUCT MUST BE INSTALLED AND MAINTAINED BY A LICENSED PROFESSIONAL PLUMBER, ELECTRICIAN, AS APPLICABLE. IN ADDITION TO THE INSTRUCTION...
MODEL CIRCULATOR ZONE VALVE SHUTOFF VALVE VACUUM BREAKER RELIEF VALVE THERMAL EXPANSION TANK DRAIN WHS Models See Chart Full Port 4 1 150 psig/210°F Included 60 Gal. Models: 4.4 Gal. 80 Gal. Models: 4.4 Gal. 120 Gal. Models: 4.4 Gal.+ Included DC Models See Chart Full Port 6 1 150 psig/210°F Include...
Domestic Water Piping 1. Connect the cold water supply to the connection labeled COLD WATER. 2. Connect the HOT WATER piping to the domestic hot water system. 3. When all domestic water piping is complete, open the cold water supply and allow some water to enter the tank. Look and listen for signs o...
