AEG FSK83700P- User Manual

When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To check the remaining time of the running programme, look at the control panel display. 4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay touch button 4 Program touch butt...

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) P1 11 0.857 235 P2 8 - 15 0.7 - 1.7 46 - 170 P5 14 - 16 1.2 - 1.5 160 - 180 P3 12.5 - 14.5 1.4 - 1.7 170 - 190 P6 12 - 14 0.8 - 1.0 82 - 92 P4 10 0.9 30 P8 4 0.1 14 P7 12 - 13 1.1 - 1.3 230 - 250 1) The pressure and the temper...

Fill the rinse aid dispenser when the indicator ( A ) is clear. 9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator ...

If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function. Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again.Pre...

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...

limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup. 12. TROUBLESHOOTING WARNING! Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel. The majority of problem...

Problem and alarm code Possible cause and solution The programme lasts toolong. • If the delay start option is set, cancel the delay setting or wait for the end of the countdown. • Activate the TimeSaver option to reduce the pro- gramme duration. • Activating options can increase the programme dura-...

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low. Check the salt indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Use salt and set regene...

The ‘standard programme’ is the standard cleaning cycle to whichthe information in the label and the fiche relates. This programme issuitable to clean normally soiled tableware and is the most efficientprogramme in terms of combined energy and water consumption. Itis indicated as "Eco" progr...