Page 3 - ПРЕДУПРЕЖДЕНИЕ
ii ПРЕДУПРЕЖДЕНИЕ ПРИ ОТКРЫТИИ УСТРОЙСТВА ВЫ МОЖЕТЕ ПОДВЕРГНУТЬСЯ ВОЗДЕЙСТВИЮ ВИДИМОГО И НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ. ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА. LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this ...
Page 4 - CAUTION: READ THIS BEFORE OPERATING THIS UNIT.; Be sure to place this unit on a level surface.
iii CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moistur...
Page 5 - English; Contents
1 En English Contents Introduction Region codes ........................................................................... 2Supplied accessories............................................................... 2Notes on discs ........................................................................ 2C...
Page 6 - Introduction; Region codes; Cleaning discs
2 En Introduction Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. DVD discs must be labeled ALL regions or Region 2 in order to play on this unit. You cannot play discs labeled for other regions. – Remote control – Two batteries (AA, R06, UM-3) for ...
Page 7 - Functional Overview; * Press the button for about two seconds.; Front panel
3 En English Functional Overview 1 Disc trayLoads up to 5 discs in the disc tray. 2 / (OPEN/CLOSE) Opens or closes the disc tray. 3 PLAYXCHANGEReloads or unloads discs without interrupting current disc playback. 4 9 (STOP) Stops playback. 5 B / ; (PLAY/PAUSE) Starts or pauses playback. 6 R / T Searc...
Page 8 - Electrostatic discharge may cause permanent damage to this unit.; Rear panel
4 En Functional Overview 1 AUDIO OUT (L, R) jacksConnect to the audio input jacks of your AV receiver or stereo system. 2 DIGITAL OUT - COAXIAL jackConnect to the coaxial input jack of your AV receiver. 3 VIDEO OUT - COMPONENT (Y, P B /C B , P R /C R ) jacks Connect to the component input jacks of y...
Page 9 - * Press and hold the button for about two; Remote control
5 En English Functional Overview 1 Turns on this unit or sets it to the standby mode. 2 TOP MENU/RETURNDisplays the top-level disc menu (DVD). Moves back to the previous menu (DVD*/VCD). 3 MENUAccesses the menu of a disc (DVD). Switches PBC on or off (VCD). 4 1 / 2 / 3 / 4 Selects an item in the cur...
Page 10 - Connections; • Depending on the component you wish; Digital connection; – If you wish to enjoy Dolby Digital, DTS, and; Analog connection
6 En Connections Be sure to turn off this unit and unplug the power supply cable before you make or change connections. • Depending on the component you wish to connect, there are various ways to make connections. Possible connections are described below. • Refer to the manuals of your other compone...
Page 11 - jacks of this unit to; Video connections
7 En English Connections If your AV receiver has video output jacks, connect your receiver and then your TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your AV receiver.This unit has three types of video output jacks...
Page 12 - Getting Started; Open the battery compartment.; inside the compartment.; Using the remote control; – places of high humidity, such as near a
8 En Getting Started 1 Open the battery compartment. 2 Insert the two supplied batteries (AA, R06, UM-3) following the indications ( + /–) inside the compartment. 3 Close the cover. Notes:– Insert batteries correctly according to the polarity markings ( + /–). The batteries inserted in the opposite ...
Page 13 - About the auto standby function; This unit is set to the standby mode.; Step 2: Turning on the power
9 En English Getting Started 1 Connect the AC power cord to an AC outlet. 2 Turn on your TV and AV receiver. 3 Select the appropriate input source of the AV receiver connected to this unit. Refer to the manual supplied with your AV receiver for details. 4 Turn on this unit. 5 Set the TV to the corre...
Page 14 - Select an item, and then press; – If the picture is not displayed; repeatedly to select “VIDEO; Press; then press; Press
10 En Getting Started PALSelect this if the connected TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format. MULTISelect this if the connected TV is compatible with both NTSC and PAL formats (such as a multi-system TV). The output format will be in accor...
Page 15 - Setting the OSD language
11 En English Getting Started You can select your own preferred language settings. This unit automatically switches to your preferred language whenever you load a disc. If the selected language is not available on the disc, the default language of the disc will be used instead. The OSD language in t...
Page 16 - Disc Operations; Pausing playback
12 En Disc Operations IMPORTANT!– If the inhibition icon ( or X) appears on the TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD disc, some operations may operate differently or be restric...
Page 17 - Selecting a track/chapter; Press and hold; Stopping playback
13 En English Disc Operations Selecting a track/chapter • Press S / T or use the numeric buttons (0-9) to select a track/chapter number. • During repeated playback of a track/ chapter, press S / T to replay the same track/chapter. Searching backward/forward 1 Press and hold S / T or press 1 / 2 . 2 ...
Page 18 - Using the disc menu
14 En Disc Operations Repeating a section within a chapter/track 1 While playing a disc, press A-B at the desired starting point. 2 Press A-B again at the desired end point. • A and B can only be set within the same chapter/track. ➜ The selected section repeats continuously. 3 To exit from the seque...
Page 19 - Zooming in; During playback, press ZOOM repeatedly; to pan through the; Press ZOOM repeatedly to return to the; displayed on the TV screen.; DVD; to view the information, and
15 En English Disc Operations Zooming in This function allows you to enlarge or lessen the picture on the TV screen and pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture at different scales.• Use 1 / 2 / 3 / 4 to pan through the enlarged picture. ➜ Pla...
Page 20 - Press; Playing by title; or the numeric buttons; Camera angle; • Press ANGLE repeatedly to select the; Special DVD features
16 En Disc Operations Title/Chapter/Track selection (DVD/VCD) 1 Press 3 / 4 to select [TITLE] or [CHAPTER] (DVD) or [TRACK] (VCD). 2 Press ENTER/OK to confirm the selection. 3 Select a title, chapter or track number using the numeric buttons (0-9). Time search (DVD/VCD) 1 Press 3 / 4 to select [TT T...
Page 21 - • Press SUBTITLE repeatedly to select; Playback starts automatically.; Playback stops at the end of the disc.; • The disc reading time may exceed 30; Playback starts automatically. If not, press
17 En English Disc Operations Audio Changing the audio language and/or format• Press AUDIO repeatedly to select an audio language. Subtitles • Press SUBTITLE repeatedly to select a subtitle language. Playback control (PBC) For VCD with playback control (PBC) feature (version 2.0 only) 1 Press MENU t...
Page 22 - Selecting a folder and track/file; Zooming pictures
18 En Disc Operations During playback, you can:• Press S / T to select another track/file in the current folder. • Press PAUSE ( ; ) to pause playback. Note:– It may not be possible to play certain MP3/ JPEG discs due to the configuration and characteristics of the discs or the recording conditions....
Page 23 - Scan effect; • Press ANGLE repeatedly to choose a
19 En English Disc Operations Scan effect • Press ANGLE repeatedly to choose a scan effect. ➜ Various scan effects appear in the top left corner of the TV screen. Playing MP3 music and JPEG pictures simultaneously 1 Load a disc that contains both music and picture data. ➜ The disc menu appears on th...
Page 24 - Setup Menu; to select the “General Setup”; Dimming the front panel display; Select this for medium brightness.; General setup menu
20 En Setup Menu Setup is carried out on the TV screen, enabling you to customize this unit to suit your own particular requirements. 1 Press SETUP. 2 Press 1 / 2 to select the “General Setup” icon. 3 Press ENTER/OK to confirm your selection. Locking/Unlocking the disc for viewing Not all discs are ...
Page 26 - Screen saver; to select a setting, and then; Sleep timer; to select a setting.; Audio setup menu
22 En Setup Menu To start program playback• Use 1 / 2 / 3 / 4 to highlight [START] on the program menu, and then press ENTER/OK. ➜ Playback starts for the selected tracks or discs in the programmed sequence. To exit from program playback• Use 1 / 2 / 3 / 4 to highlight [EXIT] on the program menu, an...
Page 27 - Setting the analog output; Setting the digital output; to
23 En English Setup Menu Setting the analog output Set the analog output to match the playback capability of this unit. 1 In “AUDIO SETUP PAGE”, press 3 / 4 to highlight [ANALOG OUTPUT], and then press 2 . STEREOSelect this to change the channel output to stereo, which only delivers sound from the t...
Page 28 - CD upsampling; Night mode; TV type
24 En Setup Menu CD upsampling Use this feature to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you activate the upsampling function, this unit automatically switches to the stereo mode. 1 In “AUDIO SETUP PAGE”, press 3 / ...
Page 29 - Setting the TV display; In “VIDEO SETUP PAGE”, press; to highlight one of the following; Select an item, and then press; *1: If the disc is not assigned to playback
25 En English Setup Menu Setting the TV display Set the aspect ratio of this unit to match your TV. The format you select must be available on the disc. Otherwise, the TV display setting will not affect the picture during playback. 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [TV DISPLAY], and ...
Page 30 - Progressive
26 En Setup Menu Progressive This feature is only valid if you have connected this unit to a progressive scan TV through the component video jacks (see “Component video jacks <B>” on page 7). 1 In “VIDEO SETUP PAGE”, press 3 / 4 to highlight [PROGRESSIVE], and then press 2 . ONSelect this to e...
Page 31 - Switching the YUV/RGB; Preference setup menu
27 En English Setup Menu 3 If you selected [PERSONAL] in step 1, proceed to steps 4–7: ➜ The “PERSONAL PICTURE SETUP” menu appears. 4 Press 3 / 4 to select one of the following options. BRIGHTNESSIncrease the value to brighten the picture or vice versa. Zero (0) is the average brightness setting val...
Page 32 - Audio, subtitle and disc menu; to highlight a rating level for the; In “PREFERENCE PAGE”, press
28 En Setup Menu Audio, subtitle and disc menu These menus contain various language options for the audio, subtitles and disc menus recorded on the DVD. For details, see “Setting the audio, subtitle and disc menu languages” on page 11. Restricting playback with parental control Some DVDs may have a ...
Page 33 - Changing the password
29 En English Setup Menu WITH MENUSelect this to display only the folder menu of the MP3/Picture CD. WITHOUT MENUSelect this to display all the files contained in the MP3/Picture CD. 2 Press 3 / 4 to select a setting, and then press ENTER/OK to confirm your selection. Changing the password The same ...
Page 34 - Language Code
30 En Language Code These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kikuyu 7573 Afrikaans 6570 Greek, 6976 Albanian 8381 Guarani 7178 Amharic 6577 Gujarati 7185 Arabic 6582 Hausa 7...
Page 36 - Troubleshooting; Problem; No power
32 En Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer ...
Page 37 - No audio at digital output
33 En English Troubleshooting No audio at digital output – Check the digital connections.– If you are playing a DTS source, check that your receiver can decode DTS and “DIGITAL OUTPUT” is set to “ALL” (see page 23). – If you are playing an MPEG-2 source, check that your receiver can decode MPEG-2. O...
Page 38 - Glossary; Component Video Out Jacks:
34 En Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal v...
Page 39 - Specifications
35 En English Specifications PLAYBACK SYSTEM DVD-Video Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW VIDEO PERFORMANCE Video (CVBS) output 1 Vpp into 75 ohm RGB (SCART) output 0.7 Vpp into 75 ohm Component video output Y: 1 Vpp into 75 ohm P B /C B P R /C R : 0.7 Vpp into...
Page 40 - BEDIENUNGSANLEITUNG
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AM...
