Smeg SHW920X Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
Table of Contents:
Page 2 – INDEX; EN
Page 3 – RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
Page 4 – CHARACTERISTICS; Dimensions
Page 5 – Wall drilling and bracket fixing
Page 6 – Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - INDEX; EN
2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS .............................................................................................................................
Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting f...
EN 5 5 7.3 11 12a 320 X 116 1÷2 116 650 min. 7.2.1 INSTALLATION Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm a...
Page 6 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM
EN 6 6 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a . • Fully tighten the support screws 12a . • Adjust the screws Vr to level the hood body. 12a Vr Connections DUCTED VERSION A...
EN 7 7 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...
Page 8 - Control panel
EN 8 8 USE Control panel Button Function Led A Turns the lighting system on and off at maximum intensity. On/Off Turns the lighting system on and off in Courtesy Light mode. On/Off B Turns the Motor off. Press and hold for approximately 5 seconds to Lock / Unlock the Keyboard, for example in order t...
Page 9 - Metal grease filters; Resetting the alarm signal
EN 9 9 MAINTENANCE REMOTE CONTROL (OPTIONAL) The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type (not included). • Do not place the remote control near to heat sources. • Used batteries must be disposed of in the prop...
EN 1 10 Activated Charcoal Filter (Recirculation Version) This cannot be washed or regenerated, and must be changed when G starts to flash, or at least once every 4 months. The Alarm signal, if it has been activated, only appears when the Suction motor is turned on. Activating the alarm signal • In ...