Smeg SHIG910X Range Hood – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Table of Contents:
Page 2 – INDEX; EN
Page 3 – RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
Page 4 – CHARACTERISTICS; Dimensions
Page 6 – Drilling the Ceiling/shelf and fixing the frame; DRILLING THE CEILING/SHELF
Page 7 – Fixing the frame; DUCTED VERSION AIR EXHAUST SYSTEM
Page 8 – RECIRCULATION VERSION AIR OUTLET; Recirculation version
Page 9 – ELECTRICAL CONNECTION
Page 10 – Control panel
Page 11 – Metal grease filters; Resetting the alarm signal
Page 12 – Activating the alarm signal; Lighting; LIGHT REPLACEMENT
Loading the manual
Instructions Manual
SHIG910X
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - INDEX; EN
2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS .............................................................................................................................
Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE
EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting f...
Page 4 - CHARACTERISTICS; Dimensions
Page 6 - Drilling the Ceiling/shelf and fixing the frame; DRILLING THE CEILING/SHELF
EN 6 6 INSTALLATION Drilling the Ceiling/shelf and fixing the frame DRILLING THE CEILING/SHELF • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct positi...
Page 7 - Fixing the frame; DUCTED VERSION AIR EXHAUST SYSTEM
EN 7 7 Fixing the frame • Loosen the two screws fastening the lower chimney and remove this from the lower frame. • Loosen the two screws fastening the upper chimney and remove this from the upper frame. If you wish to adjust the height of the frame, proceed as follows: • Unfasten the metric screws ...
Page 8 - RECIRCULATION VERSION AIR OUTLET; Recirculation version
EN 8 8 RECIRCULATION VERSION AIR OUTLET • Assemble the two halves of the hood body extension piece 14 (if necessary). • Push fit the assembled hood body extension piece 14 onto the air outlet (if necessary). • Push fit connection 15 onto the hood body extension piece 14 or directly onto the hood bod...
Page 9 - ELECTRICAL CONNECTION
EN 9 9 ELECTRICAL CONNECTION • Connect the Hood to the Mains power sup- ply, inserting a two-pole Switch with a con-tact aperture of at least 3 mm. • Remove the Metal grease filters (see par. on “Maintenance”) and make sure that the power supply Cable is properly inserted in the Suction fan socket. ...
Page 10 - Control panel
EN 1 10 USE L T1 T2 T3 T4 L1 L2 L3 L4 Control panel Button Function Led L Turns the lighting system on and off. - Press and hold for approx. 2 seconds to turn the lighting system on and off at reduced intensity. - T1 Turn the suction motor on and off at speed one. On. Press and hold the button for a...
Page 11 - Metal grease filters; Resetting the alarm signal
EN 1 11 MAINTENANCE Metal grease filters These can also be washed in the dishwasher, and need to be cleaned when all the command LEDs light up in a continuous manner or at least once every 2 months use, or more frequently if use is particularly intensive. Resetting the alarm signal • Press button T1...
Page 12 - Activating the alarm signal; Lighting; LIGHT REPLACEMENT
EN 1 12 Activated Charcoal Filter (Recirculation Version) • This cannot be washed or regenerated, and must be changed when all the command LEDs start to flash, or at least once every 4 months. Activating the alarm signal • In Recirculation Version Hoods, the Filter Saturation Alarm must be activated...
