Smeg KSEIV97X2 - User Manual

Page 2 - CONTENTS; RECOMMENDATIONS AND SUGGESTIONS

12 GB CONTENTS Dear Customer, If you follow the recommendationscontained in this Instruction Manual,your appliance will give you constanthigh performance and will remainefficient for many years to come. RECOMMENDATIONS AND SUGGESTIONS 13 CHARACTERISTICS 14 INSTALLATION 16 USE 19 MAINTENANCE 20

Page 3 - RECOMMENDATIONS AND SUGGESTIONS

13 GB RECOMMENDATIONS AND SUGGESTIONS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that i...

Page 4 - CHARACTERISTICS; Dimensions

14 GB CHARACTERISTICS Dimensions 650 min. 680 470 290 898 68 565 90 132 433 150 350 740 740 940

Page 5 - Components

15 GB 7.1a 7.1 22 23 12h 7.1b 2 2.1 2.2 8b 8a 12c 11 21 12g 1 12f 25 24 12e 12c 12c 14.1 15 10 14 Components Ref. Q . t y Product Components 1 1 Hood Body, complete with: Controls, Light,Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 1 Telescopic frame...

Page 6 - Drilling the Ceiling/shelf and fixing the frame

16 GB INSTALLATION Drilling the Ceiling/shelf and fixing the frame DRILLING THE CEILING/SHELF • Use a plumb line to mark the centre of the hob on the ceiling/support shelf.• Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position...

Page 7 - Connections

17 GB 14 15 14.1 10 ø 150 25 Upper frame• Align the power supply cable feed hole• Fix the upper frame to the ceiling or shelf using: • For concrete ceilings, use the appropriate plugs for the screw size (not provided).• For hollow brick ceilings of wall thickness of approximately 20 mm: use 4 plugs ...

Page 8 - Flue assembly - Mounting the hood body

18 GB 12f 8b 8a 12c 12c 24 12e Cmd 12c Lux Flue assembly - Mounting the hood body • Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c(2,9 x 6,5) provided. • Similarly, position the lower chimney section and fix the lower part to the frame using the 2screws...

Page 9 - USE; Control panel

19 GB L R V1 V2 V3 M S1 S2 USE Control panel L Light Switches the lighting system on and off. S 1 Led Motor running led.It flashes once after 100 working hours of the hood to indicate that the greasefilters need washing.It flashes twice after 200 working hours to indicate that the grease filters nee...

Page 10 - MAINTENANCE; Grease filters

20 GB MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS Alarm signal reset• Switch off the lights and extractor motor.• Press button V2 for at least 3 seconds, until the leds start to flash. Cleaning the filters• The filters must be cleaned when led S1 flashes or at least eve...

Page 11 - Activated charcoal filter (Recirculation version); Lighting

21 GB Activated charcoal filter (Recirculation version) REPLACING THE ACTIVATED CHARCOAL FILTER • Th e f i l t e r i s n o t w a s ha b l e a n d c a n n o t b e regenerated. It must be replaced when led S1flashes twice or at least every 4 months. Thealarm signal will only light up when the extracto...

Smeg KSEIV97X2 - User Manual

Table of Contents:

Summary

Other Smeg Range Hoods Models