Smeg KSE912X2 - User Manual

Page 3 - ES

3 3 INDICE CONSEJOS Y SUGERENCIAS........................................................................................................................................... 52 CARACTERÍSTICAS ...............................................................................................................

Page 4 - EN; RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION

EN 2 20 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting ...

Page 5 - CHARACTERISTICS; Dimensions

EN 2 21 CHARACTERISTICS Dimensions Min. 650mm Min. 650mm Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 9 1 Reducer Flange ø 150-120 mm 10 1 Damper ø 150 14.1 2 Air Outl...

Page 6 - Wall drilling and bracket fixing

EN 2 22 7.3 11 12a 320 X 116 1÷2 116 650 min. 7.2.1 INSTALLATION Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm ...

Page 7 - Mounting the hood body; Connections; DUCTED VERSION AIR EXHAUST SYSTEM

EN 2 23 Mounting the hood body • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the screws 12a . • Fully tighten the support screws 12a . • Adjust the screws Vr to level the hood body. 12a Vr Connections DUCTED VERSION ...

Page 8 - ELECTRICAL CONNECTION; Flue assembly; Upper exhaust flue

EN 2 24 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fa...

Page 9 - USE; Control panel

EN 2 25 USE Control panel Button Function Display A Turns the suction motor on/off. Displays the set speed B Decreases the working speed. Displays the set speed C Increases the working speed. Displays the set speed D Activate intensive speed from any other speed, in- cluding motor off. This speed is...

Page 10 - MAINTENANCE; Metal grease filters; FG; sign appears on the display or at least once; Resetting the alarm signal; and hold it for at least 3 seconds (see Use; Cleaning the Filters; • Remove the Filters one at a time, pushing them towards the

EN 2 26 MAINTENANCE Metal grease filters They can be washed in the dishwasher, and need to be cleaned whenever the FG sign appears on the display or at least once every 2 months use, or more frequently if use is particularly intensive. Resetting the alarm signal • Turn the Lights and the Suction Mot...

Page 11 - CHANGING THE ACTIVATED CHARCOAL FILTER; Lighting; LIGHT REPLACEMENT

EN 2 27 Activated Charcoal Filter (Recirculation Version) It cannot be washed or regenerated, and must be changed when the FC symbol on the display appears, or at least once every 4 months. The Alarm signal, if it has been activated, only appears when the Suction motor is turned on. Activating the a...

Smeg KSE912X2 - User Manual

Table of Contents:

Summary

Other Smeg Range Hoods Models