Page 3 - Im port ant inform at ion; Installation
i smarttech.com/kb/170548 Im port ant inform at ion Before you install and use your SMART Board interactive whiteboard system, read and understand the safety warnings and precautions in this user’s guide and the included important information document. These safety warnings and precautions describe ...
Page 5 - Operation
IMP ORTANT INFORMATION iii smarttech.com/kb/170548 Operation WAR NI NG l If you are using an external audio system, use only the power supply included with that product. Using the wrong power supply might create a safety hazard or damage the equipment. If in doubt, refer to the specification sheet f...
Page 6 - Environmental requirements
IMP ORTANT INFORMATION iv smarttech.com/kb/170548 Environmental requirements Before you install your SMART Board interactive whiteboard system, review the following environmental requirements. Environment alrequirement Paramet er Operating temperature l 41°F to 95°F (5°C to 35°C) from 0' to 6000' (0...
Page 7 - Cont ent s
v smarttech.com/kb/170548 Cont ent s I mport ant informat ion i Safety warnings, cautions and important information i Environmental requirements iv Chapt er 1: About your int eract ive whit eboard syst em 1 SMART Board M685ix2 interactive whiteboard system features 2 Included accessories 5 Optional ...
Page 9 - Chapter 1
Chapter 1 1 smarttech.com/kb/170548 Chapt er 1 : About your int eract ive whit eboardsyst em SMART Board M685ix2 interactive whiteboard system features 2 SMART Board M600 series interactive whiteboard 2 SMART UX80 projector 3 Included accessories 5 Remote control 5 Pens 5 Optional accessories 5 Hard...
Page 10 - SMART Board M600 series interactive whiteboard
CHAPTER 1ABOUT YOUR INTERACTIVE W HITEBOARD SYSTEM 2 smarttech.com/kb/170548 SMART Board M685ix2 interactive whiteboardsystem features Your SMART Board M685ix2 interactive whiteboard system uses the WXGA (16:10) ultra-short-throw, high-offset SMART UX80 projector. It delivers high-definition, high p...
Page 11 - SMART UX80 projector
CHAPTER 1ABOUT YOUR INTERACTIVE W HITEBOARD SYSTEM 3 smarttech.com/kb/170548 Other features of your interactive whiteboard include the following: l Pen tray buttons that activate the pens’ colors and the on-screen keyboard, as well as right- click and Orientation functions l A durable hard-coated su...
Page 13 - Included accessories; Remote control; Optional accessories; Hardware mounting kit
CHAPTER 1ABOUT YOUR INTERACTIVE W HITEBOARD SYSTEM 5 smarttech.com/kb/170548 Included accessories The following accessories are included with your interactive whiteboard system. Remote control The remote control enables you to control the system and set up your projector. Use the remote control to a...
Page 15 - Chapter 2; Choosing a location
Chapter 2 7 smarttech.com/kb/170548 Chapt er 2: Inst alling your int eract ivewhit eboard syst em Choosing a location 7 Choosing a height 8 Routing the cables 9 Installing SMART software 9 Setting up the projector image 9 Focusing the image 10 Aligning the image 10 Projector connection diagram 11 In...
Page 16 - Choosing a height
CHAPTER 2INSTAL L ING YOUR INTERACTIVE W HITEBOARD SYSTEM 8 smarttech.com/kb/170548 Refer to your interactive whiteboard system’s specifications (available at smarttech.com/support ) for its weight. Check your local building codes to ensure that your wall can support this weight, and use appropriate...
Page 17 - Routing the cables; Installing SMART software; Setting up the projector image
CHAPTER 2INSTAL L ING YOUR INTERACTIVE W HITEBOARD SYSTEM 9 smarttech.com/kb/170548 Routing the cables When connecting cables from the SMART UX80 projector to your interactive whiteboard, make sure that all cables pass between the two interactive whiteboard wall-mounting brackets and that the cables...
Page 18 - Focusing the image; Aligning the image
CHAPTER 2INSTAL L ING YOUR INTERACTIVE W HITEBOARD SYSTEM 10 smarttech.com/kb/170548 Focusing the image Use the focus lever on the bottom of the SMART UX80 projector to focus the projected image. To focus and adjust t he image Turn the focus lever clockwise or counterclockwise until the image is in ...
Page 19 - Projector connection diagram
CHAPTER 2INSTAL L ING YOUR INTERACTIVE W HITEBOARD SYSTEM 11 smarttech.com/kb/170548 Use the mechanical adjustments described in the installation document and the image alignment screen to adjust the projected image size, shape and location so that you can see the full projected image clearly. Don’t...
Page 20 - Integrating your system with peripheral devices
CHAPTER 2INSTAL L ING YOUR INTERACTIVE W HITEBOARD SYSTEM 12 smarttech.com/kb/170548 No. Connect or Connect t o: 5 HDMI 1 In Primary computer high-definition media (audio and video) source (not included) 6 HDMI 2 In Additional high-definition media (audio and video)source (not included) 7 Power Main...
Page 21 - Chapter 3; Using your projector; Using your remote control
Chapter 3 13 smarttech.com/kb/170548 Chapt er 3: Using your int eract ive whit eboardsyst em Using your projector 13 Using your remote control 13 Using the remote control buttons 14 Adjusting projector settings 15 Using your interactive whiteboard 22 This chapter describes the basic operation of you...
Page 23 - Adjusting projector settings
CHAPTER 3USING YOUR INTERACTIVE W HITEBOARD SYSTEM 15 smarttech.com/kb/170548 NOTE The Mut e, Volume Up and Volume D own buttons work only if there is an audio source connected to the projector for the selected video input source. For information on using the remote control’s Menu button to adjust t...
Page 30 - Using your interactive whiteboard
CHAPTER 3USING YOUR INTERACTIVE W HITEBOARD SYSTEM 22 smarttech.com/kb/170548 Using your interactive whiteboard Refer to the SMART Boa rd M600 series intera ctive whiteboa rd user’s guide ( smarttech.com/kb/170410 ) for in-depth information on using your interactive whiteboard and its features. When...
Page 31 - Chapter 4; Maintaining your interactive whiteboard; Preventing damage to your interactive whiteboard
Chapter 4 23 smarttech.com/kb/170548 Chapt er 4: M aint aining your int eract ivewhit eboard syst em Maintaining your interactive whiteboard 23 Preventing damage to your interactive whiteboard 23 Keeping the writing surface clean 24 Cleaning the projector 25 Focusing and adjusting the projector imag...
Page 32 - Keeping the writing surface clean
CHAPTER 4MAINTAINING YOUR INTERACTIVE W HITEBOARD SYSTEM 24 smarttech.com/kb/170548 l The digital cameras located in the corners of the frame are protected from dust and dirt by windows. In extremely dusty environments, spray a household, alcohol-free glass cleaner, such as Windex® cleaner, on a cot...
Page 35 - Resetting the lamp hours
CHAPTER 4MAINTAINING YOUR INTERACTIVE W HITEBOARD SYSTEM 27 smarttech.com/kb/170548 Resetting the lamp hours After you replace the lamp module, you need to access the projector service menu to reset the lamp hours. To prevent accidental errors, only a system administrator should perform this procedu...
Page 36 - Replacing the remote control battery
CHAPTER 4MAINTAINING YOUR INTERACTIVE W HITEBOARD SYSTEM 28 smarttech.com/kb/170548 Replacing the remote control battery Follow this procedure to replace the remote control battery. WAR NI NG l Reduce the risk associated with a leaking battery in the projector’s remote control by following these pra...
Page 37 - Chapter 5
Chapter 5 29 smarttech.com/kb/170548 Chapt er 5: Troubleshoot ing your int eract ivewhit eboard syst em Before you start 30 Locating status lights 30 Locating serial numbers 31 Determining you interactive whiteboard system’s status 32 Resolving interactive whiteboard issues 33 Resolving operation is...
Page 38 - Before you start; Locating status lights
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 30 smarttech.com/kb/170548 This chapter provides basic troubleshooting information for your interactive whiteboard system. For issues not covered in this chapter, consult the SMART Support website ( smarttech.com/support ) or contact your...
Page 39 - Locating serial numbers
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 31 smarttech.com/kb/170548 Locating serial numbers The SMART Board M600 series interactive whiteboard serial number is located on the lower-right edge of the frame, as well as on the back of the interactive whiteboard. For more informatio...
Page 41 - Resolving interactive whiteboard issues; Resolving operation issues
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 33 smarttech.com/kb/170548 P rojector P owerlight P rojector S ervicelight P en tray S electbutton status light P rojected image Touch and pencontrol S tatus and related troubleshooting Off Flashing red Off None None The projector’s opera...
Page 42 - Resolving projector issues; Resolving projector errors
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 34 smarttech.com/kb/170548 Resolving projector issues Resolving projector errors System administrators can resolve the following projector errors on their own prior to contacting SMART Support. Performing initial troubleshooting on your p...
Page 44 - Resolving image issues
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 36 smarttech.com/kb/170548 6. If the previous steps don’t resolve the issue, disconnect the power cable and then contact your authorized SMART reseller. Resolving image issues To resolve common image issues, complete the following tasks: ...
Page 47 - Resolving audio issues
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 39 smarttech.com/kb/170548 The projector image can slip if the projector is moved often or installed in a location prone to vibration, such as next to a heavy door. Follow these precautions to help prevent the image from becoming unaligne...
Page 48 - Resolving network communication issues
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 40 smarttech.com/kb/170548 l If you’re using an external audio system, ensure that your speaker or audio system is on and that the volume is turned up. l Check that your video source input, such as your computer or video device, isn’t mal...
Page 49 - Accessing the service menu; Retrieving your password
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 41 smarttech.com/kb/170548 3. Press the Menu button, and then select the Net work Set t ings menu to check the IP address. See Adjusting projector settings on page 68 for a description of the IP address field. Enter this IP address into y...
Page 50 - Resetting the projector; Transporting your interactive whiteboard system
CHAPTER 5TROUBL ESHOOTING YOUR INTERACTIVE W HITEBOARD SYSTEM 42 smarttech.com/kb/170548 Resetting the projector At some point during troubleshooting, you might need to reset all projector settings. I MPOR TANT This action is irreversible. To reset all project or set t ings 1. Using the remote contr...
Page 51 - Appendix A; Web page management
Appendix A 43 smarttech.com/kb/170548 Appendix A: Rem ot ely m anaging your syst emt hrough a net work int erface Web page management 43 Accessing web page management 44 Home 44 Control panel 44 Control panel II 47 Failurelog 48 Network settings 48 E-mail alerts 49 Password settings 50 Simple Networ...
Page 52 - Accessing web page management; Home
APPENDIX AREMOTEL Y MANAGING YOUR SYSTEM THROUGH A NETW ORK INTERFACE 44 smarttech.com/kb/170548 Accessing web page management Before you can access the web page, connect your projector to the network, and then enable the projector’s network functions using the projector’s menu. An IP address appear...
Page 55 - Control panel II
APPENDIX AREMOTEL Y MANAGING YOUR SYSTEM THROUGH A NETW ORK INTERFACE 47 smarttech.com/kb/170548 Submenu set t ing Descript ion Startup Screen Sets the type of startup screen to SMAR T or User. The SMAR Tscreen is the default SMART logo on a blue background. The Userscreen uses the saved picture fro...
Page 58 - Password settings
APPENDIX AREMOTEL Y MANAGING YOUR SYSTEM THROUGH A NETW ORK INTERFACE 50 smarttech.com/kb/170548 Submenu set t ing Descript ion Outgoing SMTP server Displays or allows you to set the Simple Mail Transfer Protocol(SMTP) server that you use on your network. Username Displays or allows you to set the S...
Page 59 - Simple Network Management Protocol (SNMP); Crestron® RoomView®
APPENDIX AREMOTEL Y MANAGING YOUR SYSTEM THROUGH A NETW ORK INTERFACE 51 smarttech.com/kb/170548 l The first time you enable the password settings, the default password value is four numbers, for example, 1234. l If you forget the projector password, refer to Accessing the service menu on page 41 to...
Page 61 - Appendix B
Appendix B 53 smarttech.com/kb/170548 Appendix B: Rem ot ely m anaging your syst emt hrough an RS-232 serial int erface Connecting your room control system to the SMART UX80 projector 54 Pin configuration on the projector’s RS-232 connector 54 Serial interface settings 54 Projector programming comma...
Page 64 - Projector programming commands; Projector power state controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 56 smarttech.com/kb/170548 Projector programming commands This section documents the projector programming commands and responses. Projector power state controls Your projector responds to commands only at certain power stat...
Page 66 - Power state controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 58 smarttech.com/kb/170548 Power state controls These commands put the projector in and out of Standby mode and request the projector’s current power state. The projector’s power state determines whether certain commands are...
Page 67 - Display controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 59 smarttech.com/kb/170548 Display controls These commands control the video display of the projector. Usable command by power st at e Propert y Valid values Not es St andby / idle On get get videoinputs Returns a text list ...
Page 68 - Audio controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 60 smarttech.com/kb/170548 Audio controls These commands control the audio of the projector. Usa ble comma nd by power sta te Property Va lid va lues Notes Sta ndby / idle On set or get volumecontrol • on • off (default) Whe...
Page 69 - System controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 61 smarttech.com/kb/170548 System controls These commands control the integration properties of the projector. Usa ble comma nd by power sta te Property Va lid va lues Notes Sta ndby / idle On set or get set or get usb1sourc...
Page 71 - Service and support controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 63 smarttech.com/kb/170548 Service and support controls These commands control the integration properties of the projector. Usa ble comma nd by power sta te Property Va lid va lues Notes Sta ndby / idle On get modelnum [mode...
Page 73 - Network controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 65 smarttech.com/kb/170548 Network controls These commands control the integration properties of the projector. Usa ble comma nd by power sta te Property Va lid va lues Notes Sta ndby / idle On set or get network • on • off ...
Page 75 - Advanced display controls
APPENDIX BREMOTEL Y MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE 67 smarttech.com/kb/170548 Advanced display controls These commands control the integration properties of the projector. Usa ble comma nd by power sta te Property Va lid va lues Notes Sta ndby / idle On set or get projection...
Page 85 - Appendix C; Int egrat ing ot her devices; Video format; Native video format
Appendix C 77 smarttech.com/kb/170548 Appendix C: Int egrat ing ot her devices Video format 77 Native video format 77 Video format compatibility 78 HD and SD signal format compatibility 79 Video system signal compatibility 80 Connecting peripheral sources and outputs 80 This appendix provides inform...
Page 86 - Video format compatibility
APPENDIX CINTEGRATING OTHER D EVICES 78 smarttech.com/kb/170548 Video format compatibility The following tables list the projector’s compatible VESA RGB video formats by resolution, which you can adjust by using the aspect ratio commands described in Adjusting projector settings on page 68. R esolut...
Page 87 - HD and SD signal format compatibility
APPENDIX CINTEGRATING OTHER D EVICES 79 smarttech.com/kb/170548 R esolut ion Mode Aspect rat io R efresh rat e ( Hz) “ Mat ch I nput ”appearance 1280 × 1024 SXGA3 85 5:4 85.024 Pillarbox 1400 × 1050 SXGA+ 4:3 59.978 Pillarbox 1600 × 1200 UXGA 4:3 60 Pillarbox 1680 × 1050 WSXGA+ 16:10 60 Native 1920 ...
Page 88 - Video system signal compatibility; Connecting peripheral sources and outputs
APPENDIX CINTEGRATING OTHER D EVICES 80 smarttech.com/kb/170548 Video system signal compatibility The following tables list the projector’s video system signal compatibility delivered over HDMI video connectors, which you can adjust by using the aspect ratio commands described in Adjusting projector...
Page 91 - Appendix D; Rem ot e cont rol code definit ions
Appendix D 83 smarttech.com/kb/170548 Appendix D: Rem ot e cont rol code definit ions IR signal format: NEC1 Key R epeatformat Vendor code Key code Byt e 1 Byt e 2 Byt e 3 Byt e 4 Input F1 8B CA 14 EB Power ( ) F1 8B CA 12 ED Menu F1 8B CA 1B E4 Up ( ) F1 8B CA 40 BF Left ( ) F1 8B CA 42 BD Enter ( ...
Page 93 - Appendix E; Batteries; Perchlorate material; Mercury
Appendix E 85 smarttech.com/kb/170548 Appendix E: Hardware environm ent alcom pliance SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner. Waste Electrical and Electronic Equipment andBatte...
Page 95 - Index
Index 87 smarttech.com/kb/170548 3 3.5 mm audio connectors 11 A accessories included 5optional 5 alarms 47aspect ratios 3, 18, 46, 71, 77-80audio 60 controlling volume of 45muting 14resolving issues with 39 B batteries 28, 85Blu-ray players 80 C cameras 80closed captioning 45connection diagrams proj...
