Skil FM Series - Manual

Skil FM Series

Skil FM Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
Page: / 40

Table of Contents:

  • Page 2 – Ordering Replacement or Extra Parts; LOADING INSTRUCTIONS; OPERATING INSTRUCTIONS
  • Page 3 – INSTALLATION INSTRUCTIONS; Height Differential
  • Page 4 – Bolt On Installation
  • Page 6 – ELECTRICAL SCHEMATIC; MECHANICAL EDGE-O-DOCK ADJUSTING INSTRUCTIONS
  • Page 8 – POWER UNIT ASSEMBLY, PE
  • Page 10 – FM SERIES
  • Page 11 – PARTS IDENTIFICATION
  • Page 12 – WARNING LABEL IDENTIFICATION; MAKE SURE ALL WARNING LABELS ARE IN PLACE!; HYDRAULIC OIL OR EQUIVALENT; NOTICE NOTA AVIS
  • Page 13 – LIMITED WARRANTY; SERVICE RECORD
  • Page 14 – Contenido; INSTRUCCIONES DE RECIBO
  • Page 15 – INSTRUCCIONES DE CARGA; INSTRUCCIONES DE USO; Operación Mecánica - Serie FM
  • Page 16 – INSTRUCCIONSES DE INSTALACIÓN; Instrucciones de Instalación del Enlace; ALTURA DIFERENCIAL
  • Page 17 – INSTALACIÓN CON SOLDADURA; (el borde de aluminio del andén es de 15 cm ó mayor); INSTALACIÓN CON TORNILLOS; (el borde de aluminio del andén es menor de 15 cm); INSTALACIÓN DEL CANTO DE ANDEN • SERIE FM
  • Page 18 – INSTALACIÓN DE LA SERIE PE; INSTALACIÓN DE LA SERIE PP
  • Page 19 – ESQUEMA ELÉCTRICO; INSTRUCCIONES DE AJUSTE DE CANTO - DE - ANDÉN MECÁNICO
  • Page 20 – PROBLEMA; ACCION CORRECTIVA
  • Page 21 – ENSAMBLE DE LA BOMBA, PE
  • Page 22 – CANTO DE ANDÉN • SERIE FM
  • Page 23 – IDENTIFICACIÓN DE PARTES DEL CANTO DE ANDÉN • SERIE FM
  • Page 24 – IDENTIFICACION DE PARTES
  • Page 25 – IDENTIFICACIÓN DE LAS ETIQUETAS DE AVISO; ASEGURESE DE QUE TODAS LAS ETIQUETAS DE AVISO ESTAN EN SU LUGAR
  • Page 26 – GARANTIA LIMITADA; REGISTRO DE REPARACIÓN
  • Page 27 – INSTRUCTIONS DE RÉCEPTION
  • Page 28 – INSTRUCTIONS DE CHARGEMENT; INSTRUCTIONS DE FONCTIONNEMENT
  • Page 30 – INSTALLATION DE BORDURE DE QUAI • SÉRIES FM; Installation Avec Boulons
  • Page 31 – INSTALLATION POUR SÉRIES PE; INSTALLATION POUR SÉRIES PP
  • Page 32 – SHÉMA ÉLECTRIQUE
  • Page 33 – LE FONCTIONNEMENT DE L'ALIMENTATION DU GROUPE MOTEUR - PE; Guide de Depannage; PROBLÈMES; ACTION
  • Page 35 – BORDURE DE QUAI • SÉRIES FM
  • Page 36 – IDENTIFICATION DES PIÈCES POUR BORDURE DE QUAI • SÉRIES FM
  • Page 37 – IDENTIFICATION DES PIÈCES
  • Page 38 – IDENTIFICATION DES ÉTIQUETTES D'AVERTISSEMENT
  • Page 39 – GARANTIE LIMITÉE; COMMERCIAL UNIFORME et les lois promulguées dans l'état d'Indiana.; RAPPORT DE SERVICE; Copyright 2003 Vestil Manufacturing Company
  • Page 40 – Scissor Lift Table; X I I; II; Pallet Server; Material Handling Problem Solvers; Ground Lift Tilter
Loading the manual

1

Vestil Manufacturing Corporation

2999 North Wayne St., Angola, IN 46703

Ph 260-665-7586 Fax: 260-665-1339

www.vestil.com E-mail: [email protected]

EDGE-O-DOCK • MODEL FM / PP / PE

OWNER'S
MANUAL

Revised 06-04

07-126-101

A company dedicated to solving loading dock and
material handling problems since 1955

.

EDGE-O-DOCK

FM / PP / PE SERIES

Loading Dock Solutions

WARNINGS & SAFETY INSTRUCTIONS

Read owner's manual completely before operating unit!

• Read and understand the owner's manual before using

or servicing the leveler.

• The lip plate should be secured outward before any work

is preformed on the leveler.

• Ensure that the safety and warning labels stay in place

and are legible. See the labels page in this manual.

• The Edge-O-Dock leveler must be securely welded and

anchored to the dock face. See the installation
instructions.

• Do not use the leveler if any damage or unusual noise is

observed.

• Always watch the leveler carefully when it is in

operation.

• Be sure nothing is on the top of the leveler before

operating it.

• Do not perform any modifications to the leveler without

the manufacturer's approval. Failure to receive
authorization for changes to the equipment could void
the warranty.

• Maintenance and repairs are to be performed only by

personnel qualified to perform the required work.

• Do not use brake fluid or jack oils in the hydraulic

system. If oil is needed, use an antiwear hydraulic fluid
with an SUS viscosity of 150 - 200 at 100°F, (SAE
viscosity grade 32), or Dexron transmission fluid.

• Use only replacement parts either supplied or approved

by the manufacturer.

Contents

Warnings and Safety Instructions .................. 1
Receiving Instructions ................................... 1
Loading Instructions ...................................... 2
Unpacking and Handling Instructions ............ 2
Operating Instructions ................................... 2
Installation Instructions ............................... 3-5
Electrical Schematic ...................................... 6
Power Unit Exploded Parts Drawing ............. 8

Spring Adjusting Instructions (FM Series) ..... 6
PE Hydraulic & Troubleshooting Guide

7

Exploded Parts Drawing (FM Series) ............ 9
Parts List (FM Series) .................................. 10
Exploded Parts Drawing (PP & PE) ............ 11
Parts List ..................................................... 11
Warning Label Identification ........................ 12
Limited Warranty/Service Record ................ 13

E
N

G

L

I

S
H

E
S
P
A
N

O

L

F

R
A
N
Ç
A

I

S

RECEIVING INSTRUCTIONS

Every unit is thoroughly tested and inspected

prior to shipment. However, it is possible that the unit
may incur damage during transit. If you see damage
when unloading, make a note of it on the BILL OF
LADING.

Remove all packing and strapping material,

inspect for damage. IF DAMAGE IS EVIDENT, FILE A
CLAIM WITH THE CARRIER IMMEDIATELY! Also,
check the unit size, type of power unit, etc., to see that
the unit is correct for the intended application.

MODEL NUMBER AND CAPACITIES

The model number, serial number and capacities

are inscribed on the nameplate. Please remember to
include these numbers in any correspondence with your
dealer or the factory.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Ordering Replacement or Extra Parts; LOADING INSTRUCTIONS; OPERATING INSTRUCTIONS

2 Mechanical Operation • Series FM 1.) Remove the lever from right side of bumper box andinsert it into the socket of the back plate (the socket ison right hand side). 2.) Pull the handle back until the leveler plate is fullyextended and leaning back towards the ramp. 3.) Push the handle forward to ...

Page 3 - INSTALLATION INSTRUCTIONS; Height Differential

3 Recommended dock edge for new construction The recommended dock edge for newconstruction is a well anchored 6 inchchannel (8.2 lb. minimum). Concrete "J"anchors shall be 1½ inches wide with alength of 6 inches plus 1½ inches bent at90 degrees on the end. Minimum materialthickness shall be ...

Page 4 - Bolt On Installation

4 Weld On Installation (dock edge steel is 6" or greater) Bolt And Weld On Installation (dock edge steel is less than 6") 1. Remove all material and protrusions from the faceof the dock. 2. Center the ramp in the doorway and tack weld ateach end. Be certain the mounting plate does notextend ...

Other Skil Models