Page 3 - CONTENTS
1 CAUTIONS ................................................................................................................ 3ENVIRONMENTAL INFORMATION ......................................................................... 5INTRODUCTION ................................................................
Page 5 - CAUTIONS; Caution label on the machine; Do not install your machine in areas that are:
3 CAUTIONS Caution label on the machine The label ( ) in the fusing area of the machine indicates the following: : Caution, risk of danger: Caution, hot surface Cautions on using the machine Follow the cautions below when using this machine. Warning: • The fusing area is hot. Exercise care in this a...
Page 7 - ENVIRONMENTAL INFORMATION
5 ENVIRONMENTAL INFORMATION As an E NERGY S TAR ® Partner, SHARP has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency. A small amount of ozone is produced within the unit during operation. The emission level is insufficient to cause any health hazard. Note: The...
Page 8 - INTRODUCTION; Using the manual; About the operation manuals; The operation manuals for the machine are as follows:; Operation manual for fax (for the models with the AR-FX9 option); This manual explains the procedures for using the machine as a fax.; Conventions used in this manual and online manual; pertinent to the use of the machine.; Warning; Note
6 INTRODUCTION Using the manual This machine has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all machine features, be sure to familiarize yourself with this manual and the machine. For quick reference ...
Page 9 - Explanation of illustration; MAIN FEATURES; High-speed laser copying; images such as monochrome photos and colour photos.; AB series (metric) and rich series reference
7 Explanation of illustration Depending on the model you have and on the options installed, some of the illustrations in this manual may be different, however, the basic operations are the same. When references are made to paper size and weights, the inch series values are quoted in brackets.For exa...
Page 10 - a computer using a USB cable to enable use as a scanner.; Environment and people friendly design; consumption when the machine is not in use.
8 Enhanced copying features • Zoom copies can be made from 25% to 400% in increments of 1%. (When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.) • Continuous copying of up to 99 copies is possible.• Sets of output can be offset from each other for easy separation (offset func...
Page 11 - PREPARATIONS
9 1 Chapter 1 1 This chapter provides basic information that you should know before using the machine. PART NAMES Document cover Paper output tray extension Document glass Power switch Operation panel Handles Front cover Power cord Paper tray Fusing unit release lever Side cover Transfer charger Sid...
Page 12 - Operation panel
PREPARATIONS 10 Operation panel [MODE SELECT] key / Mode indicators Press this key to select the mode. The indicator of the selected mode lights (copy, printer, scanner, fax mode indicators). Display This shows messages indicating the machine status and any problems that occur, as well as user progr...
Page 13 - Display
PREPARATIONS 11 1 [ZOOM] key Press to select an enlargement or reduction ratio.To select a preset ratio setting, press the [ZOOM] key and select the desired preset ratio. To select a ratio that is not preset, press the [ZOOM] key, select the preset ratio that is closest to the desired ratio, and the...
Page 14 - POWER ON AND OFF; Power on; Language setting; All special copier modes:; Caution; The main screen of copy mode appears.
12 POWER ON AND OFF The power switch is located on the left side of the machine. Power on Turn the power switch to the "ON" position. The ready indicator will light up and other indicators which show the initial settings of the display will also light up to indicate the ready condition. For ...
Page 15 - Power off; Preheat mode; ). Normal operation also resumes automatically
PREPARATIONS 13 1 About the scan head The scan head lamp remains on constantly when the machine is in the ready condition (when the ready indicator is illuminated).The machine adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This i...
Page 16 - For best results, use only SHARP recommended paper.; LOADING PAPER
14 2 Chapter 2 The tray location indicator will blink when there is no paper in the selected paper tray, or when the selected paper tray is not installed or is improperly installed. PAPER For best results, use only SHARP recommended paper. * 1 The number of sheets of paper that can be loaded varies ...
Page 17 - Special papers; Follow these guidelines when using special papers.; LOADING THE PAPER TRAY
LOADING PAPER 15 2 Special papers Follow these guidelines when using special papers. ● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must be used, feed each she...
Page 19 - Important points when inserting paper in the bypass tray; envelopes must be fed one sheet at a time through the bypass tray.; Envelopes; Available
17 2 BYPASS FEED (including special paper) The bypass tray can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Important points when inserting paper in the bypass tray Up to 50 sheets of standard copy paper can be inserted in the bypass tray. (C...
Page 20 - Loading paper in the bypass tray; Open the bypass tray and extend the tray.; Print face
LOADING PAPER 18 Loading paper in the bypass tray 1 Open the bypass tray and extend the tray. 2 Set the bypass tray paper guides to the paper width. Insert the paper (print face down) all the way into the bypass tray. 3 Press the [TRAY SELECT] key ( ) to select the bypass tray. • Paper must be fed n...
Page 21 - CHANGING A TRAY'S PAPER SIZE SETTING; Follow these steps to change a tray's paper size setting.
19 2 CHANGING A TRAY'S PAPER SIZE SETTING Follow these steps to change a tray's paper size setting. 1 Press the [MENU] key. Press the [ ] key ( ) or [ ] key ( ) until "PAPER SIZE" appears, and then press the [OK] key. 2 Press the [ ] key ( ) or [ ] key ( ) to select the tray, and then press ...
Page 22 - Chapter 3; This chapter explains basic copying functions.; NORMAL COPYING; Using the document glass; Copying books or originals with folds or creases; mark; MAKING COPIES
20 3 Chapter 3 This chapter explains basic copying functions. NORMAL COPYING Using the document glass 1 Open the document cover/SPF/RSPF, and place the original face down on the document glass.[How to place the original] Align the original with the original scale and the centring ( ) mark. 2 Gently ...
Page 23 - image loss; Original face up
MAKING COPIES 21 3 Removing the document cover To copy large originals like newspapers, remove the document cover. To remove the cover, lift straight up as shown. To replace the cover, do the reverse.The SPF/RSPF cannot be removed. Using the SPF/RSPF 1 Make sure that an original has not been left on...
Page 24 - thermal transfer paper.
MAKING COPIES 22 Originals that cannot be used in the SPF/RSPF The following originals cannot be used. These may cause misfeeds or smudging and unclear images.• Transparencies, tracing paper, other transparent or translucent paper, and photographs. • Carbon paper, thermal paper.• Originals that are ...
Page 25 - Setting the number of copies; Press the numeric keys to set the number of copies.; SELECTING THE TRAY; lower
MAKING COPIES 23 3 Setting the number of copies Press the numeric keys to set the number of copies. The set number of copies appears in the display. A maximum of 99 copies can be set.If you wish to make only a single copy, copying is possible with the display showing "0". SELECTING THE TRAY ...
Page 26 - MAKING A COPY DARKER OR LIGHTER; Original types; backgrounds to make text easier to read.
24 MAKING A COPY DARKER OR LIGHTER Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two original types and five exposu...
Page 27 - The copy will be delivered to the paper output tray.
25 3 REDUCTION/ENLARGEMENT/ZOOM Copies can be reduced down to 25% or enlarged up to 400%. (When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.) The [ZOOM] key can be pressed to quickly select a ratio from among eight preset ratios. In addition, the [ ] key ( ) and [ ] key ( ) ...
Page 28 - SHORT EDGE; : Select when binding the paper at the short edge.; LONG EDGE; : Select when binding the paper at the long edge.; A B
26 4 Chapter 4 AUTOMATIC TWO-SIDED COPYING Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used, two-sided copies of two-sided originals can easily be made. * When the RSPF is installed. When performing automatic two-sided copying of one-sided o...
Page 29 - CONVENIENT COPY FUNCTIONS; The original for the front side is scanned into the memory.
CONVENIENT COPY FUNCTIONS 27 4 Using the document glass 1 Place the original that you wish to copy onto the front side of the paper on the document glass and close the document cover/SPF/RSPF. 2 Press the [2-SIDED COPY ( )] key until "1 TO 2" appears, and then press the [OK] key. 3 4 Press t...
Page 31 - SORT COPY; Copies of multiple original pages can be sorted into sets.; Repeat step 5 until all originals have been scanned into memory.; When all originals have been scanned, press the [; The copies are delivered to the paper output tray.; Sort copy
29 4 SORT COPY Copies of multiple original pages can be sorted into sets. Using the document glass 1 Place the first original. (p.20) 2 Press the [E-SORT/SP.FUNC ( )] key until "SORT" appears and then press the [OK] key. 3 Press the [ ] key ( ) to move " " to the "ON" positio...
Page 32 - Offset function during sort copy; If the memory becomes full; Offset function
CONVENIENT COPY FUNCTIONS 30 Using the SPF/RSPF 1 Place the originals. (p.21) 2 Press the [E-SORT/SP.FUNC ( )] key until "SORT" appears and then press the [OK] key. 3 Press the [ ] key ( ) to move " " to the "ON" position and then the [OK] key. 4 Select the number of copies a...
Page 33 - Pattern 2
31 4 COPYING MULTIPLE ORIGINALS ONTO A SINGLE SHEET OF PAPER (2 IN 1 copy) Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.This function is convenient for compiling multi-page reference materials into a compact format, or for providing an overview of all pa...
Page 34 - ] key after all pages
CONVENIENT COPY FUNCTIONS 32 4 Press the [ ] key ( ) or [ ] key ( ) to select the original size and then press the [OK] key. The following original sizes can be selected:"A4", "B5", "A5", "8.5x14", "8.5x13", "8.5x11", "5.5x8.5". 5 Set the numbe...
Page 35 - The copy is delivered to the paper output tray.
CONVENIENT COPY FUNCTIONS 33 4 Using the SPF/RSPF 1 Place the originals. (p.21) 2 Press the [E-SORT/SP.FUNC ( )] key until "2IN1" appears and then press the [OK] key. 3 Press the [ ] key ( ) to move " " to the "ON" position and then press the [OK] key. 4 Press the [ ] key ( )...
Page 36 - CREATING MARGINS WHEN COPYING; Document glass; AB
34 CREATING MARGINS WHEN COPYING (Margin shift) The margin shift function is used to automatically shift the text or image or the copy paper approximately 10 mm (1/2").As shown below, LONG EDGE or SHORT EDGE can be selected. 1 Place the original(s). 2 Press the [E-SORT/SP.FUNC ( )] key until ...
Page 38 - MFP driver; Printer driver; Sharpdesk; SET UP THE SOFTWARE
36 5 Chapter 5 This chapter explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained. SOFTWARE The CD-ROM that accompanies the machine contains the following software: MFP d...
Page 39 - BEFORE INSTALLATION; Hardware and software requirements; Installation environment and usable software; Computer type
37 5 BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. * 1 The machine's USB connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0 driver is preinstalle...
Page 40 - INSTALLING THE SOFTWARE
38 INSTALLING THE SOFTWARE The procedure for a standard installation of the software is explained below. If the machine is connected by a USB cable, it is recommended that you use the standard installation. 1 The USB cable must not be connected to the machine. Make sure that the cable is not connect...
Page 42 - CUSTOM INSTALLATION
SET UP THE SOFTWARE 40 10 Follow the instructions in the plug and play window to install the MFP driver. Follow the on-screen instructions. This completes the installation of the MFP driver. • If you installed Button Manager, set up Button Manager as explained in "SETTING UP BUTTON MANAGER" ...
Page 50 - Using the machine as a shared printer
SET UP THE SOFTWARE 48 8 When the model selection window appears, select model name of your machine and click the "Next" button. Follow the on-screen instructions. 9 You will return to the window of step 3. If you wish to install Sharpdesk, click the "Utility Software" button. To ins...
Page 53 - SETTING UP BUTTON MANAGER; Windows XP
51 5 SETTING UP BUTTON MANAGER Button Manager is a software program that works with the scanner driver to enable scanning from the machine.To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps below to link Button Manager to scanner events. Wind...
Page 57 - Connecting a USB cable; Insert the other end of the cable into your computer's USB port.
55 5 CONNECTING THE MACHINE TO YOUR COMPUTER Connecting a USB cable Follow the procedure below to connect the machine to your computer.A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the appropriate cable for your computer. 1 Insert the cable...
Page 58 - Connecting a parallel cable; Obtain an IEEE1284 shielded parallel interface cable.
SET UP THE SOFTWARE 56 Connecting a parallel cable 1 Obtain an IEEE1284 shielded parallel interface cable. 2 Insert the cable into the parallel interface connector located on the rear of the unit, and fasten with clasps. 3 Insert the other end of the cable into the interface connector of your comput...
Page 59 - Chapter 6; parallel
57 6 Chapter 6 6 The machine includes a USB connector and a parallel connector as standard equipment.When the USB connector is used, the printer and scanner functions can be used.When the parallel connector is used, the printer function can be used.The machine has the following features:• High-speed...
Page 60 - Make sure that paper is loaded in the tray.; The print job will be delivered to the paper output tray.; Cancelling a print job
58 USING THE PRINTER MODE The procedure for loading paper for printing is the same as for loading copy paper. See "LOADING PAPER" (p.14). BASIC PROCEDURE FOR PRINTING The basic procedure for printing is explained in the following. To use convenient printer functions, see the "Online Manu...
Page 61 - Scanning from the operation panel of the machine
59 6 USING THE SCANNER MODE The procedure for placing the original is the same as for copying. See "NORMAL COPYING" (p.20). SCANNING USING THE KEYS ON THE MACHINE When scanning is performed by this method, the application that has been set in Button Manager will automatically start and the s...
Page 62 - PRINTER/SCANNER FUNCTIONS; Button Manager scan menu; SCANNING FROM YOUR COMPUTER; Yes
PRINTER/SCANNER FUNCTIONS 60 Button Manager scan menu For information on Button Manager settings, see the Button Manager help file. The names in the Button Manager menu ("xxxx" in "SC1:xxxx", etc.) can be changed. See the online manual. SCANNING FROM YOUR COMPUTER The machine support...
Page 63 - HOW TO USE THE ONLINE MANUAL; The window at right will appear.; Click; Installing Acrobat Reader; Turn on your computer.; Follow the on-screen instructions to install Acrobat Reader.
61 6 HOW TO USE THE ONLINE MANUAL The online manual provides detailed instructions for operating the unit as a printer and scanner. It also provides methods for dealing with printing or scanner problems.To access the online manual, your computer must have Acrobat Reader 5.0 or later. If this is not ...
Page 64 - Copy mode; • Auto clear time automatically; • This function automatically; USER SETTINGS
62 7 Chapter 7 The user settings allow you to customize machine settings to better meet your needs. USER PROGRAMS The user settings consist of the following items.To change the user program settings as explained in "SELECTING A SETTING FOR A USER PROGRAM" (p.67). Copy mode Program number Pro...
Page 65 - • When copying using the SPF/; • Use this setting to select the
USER SETTINGS 63 7 4 AUTO SHUT-OFF TIME 1: 5 MIN. 2: 30 MIN.3: 60 MIN.4: 120 MIN.5: 240 MIN. • This function automatically switches the machine to a state that consumes even less power than preheat mode if the set duration of time elapses without the machine being used when the power is on. All ligh...
Page 68 - Print mode; When the 250-sheet paper feed unit is installed.; • When this function is enabled,
USER SETTINGS 66 Print mode * 1 The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably. * 2 When the 250-sheet paper feed unit is installed. Program number Program name Setting codes (factory default setting appears...
Page 69 - SELECTING A SETTING FOR A USER PROGRAM; • You can also select a program by; change the setting of the selected item.; • If you mistakenly select the wrong item, press the [CLEAR] key
67 7 SELECTING A SETTING FOR A USER PROGRAM 1 Press the [MENU] key and then press the[OK] key. In printer mode, the user programs are accessedby simply pressing the [MENU] key. 2 Press the [ ] key ( ) or [ ] key ( ) to select the item that you wish to configure in the USER PROGRAM items, and then pr...
Page 71 - Indication
69 8 Chapter 8 8 Problems related to general use of the machine, the copy function, and software setup are explained here. Be sure to check the problem carefully before calling for service, as many problems can be solved by the user.If you are unable to solve the problem, turn off the main switch, u...
Page 72 - TROUBLESHOOTING AND MAINTENANCE
TROUBLESHOOTING AND MAINTENANCE 70 Error indicator Steadily lit TONER CARTRIDGE IS NEAR EMPTY. Replacement of toner cartridge will be needed soon. Prepare a new cartridge. 83 MAINTENANCE REQUIRED CALL FOR SERVICE Service by an authorized SHARP service technician is required. - MEMORY FULL, PRESS STA...
Page 73 - TROUBLESHOOTING THE MACHINE; Problem
71 8 TROUBLESHOOTING THE MACHINE The following problems are related to the general operation of the machine and copying. Problem Cause and solution Page The machine does not operate. The machine is not plugged into a power outlet. → Plug the machine into a grounded outlet. - Power switch OFF. → Turn...
Page 74 - Place the original correctly.; Paper curled or damp.; Do not use curled or crimped paper.; Original smudged or blotchy.; Use a clean original.
TROUBLESHOOTING AND MAINTENANCE 72 Problem Cause and solution Page Part of the image is cut off or there is too much blank space. The original was not placed in the correct position. → Place the original correctly. 20, 21 An appropriate ratio was not used for the size of the original and the size of...
Page 77 - PROBLEMS DURING SETUP OF THE SOFTWARE
75 8 PROBLEMS DURING SETUP OF THE SOFTWARE If the software does not install correctly, check the following items on your computer.To remove the software, see "Removing the software" (p.78). MFP driver cannot be installed (Windows 2000/XP) If the MFP driver cannot be installed in Windows 2000...
Page 78 - Plug and play screen does not appear (USB only); Click the
TROUBLESHOOTING AND MAINTENANCE 76 Plug and play screen does not appear (USB only) If the Plug and Play screen does not appear after you connect the machine to your computer with a USB cable and turn on the machine, follow the steps below to verify that the USB port is available. 1 Click the "st...
Page 80 - Removing the software; If you need to remove the software, follow these steps.
TROUBLESHOOTING AND MAINTENANCE 78 4 Select "FILE:" in the "Print to the following port" list box, and click the "OK" button. 5 Click the "SHARP AR-M155" printer driver icon and select "Properties" from the "File" menu. 6 Click the "Ports" tab....
Page 81 - MISFEED REMOVAL; Open the bypass tray and side cover, in that order.; Misfeed in the paper feed area
79 8 MISFEED REMOVAL When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in the display, and the machine stops operating. If a misfeed occurs when using the SPF/RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display. ("X" indicates th...
Page 82 - A: Misfeed in the paper feed area; Fusing unit release lever
TROUBLESHOOTING AND MAINTENANCE 80 A: Misfeed in the paper feed area 1 Gently remove the misfed paper from the paper feed area as shown in the illustration. If the error indicator blinks and the misfed paper is not visible in the paper feed area, pull out the paper tray and remove the misfed paper. ...
Page 83 - C: Misfeed in the transport area; Lower the fusing unit release lever.
TROUBLESHOOTING AND MAINTENANCE 81 8 2 Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area". 3 Raise the fusing unit release lever and then close the side cover by pressing the ro...
Page 84 - Document feeder cover; Reversing tray
TROUBLESHOOTING AND MAINTENANCE 82 4 Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. D: Misfeed in the SPF/RSPF An origin...
Page 85 - direction of the arrow while rotating the roller.; TONER CARTRIDGE REPLACEMENT; toner
TROUBLESHOOTING AND MAINTENANCE 83 8 (C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the roller. TONER CARTRIDGE REPLACEMENT When toner is low, the error indicator will light up and "TONER CARTRIDGE IS NEAR EMPTY." will appe...
Page 86 - Toner cartridge lock release lever
TROUBLESHOOTING AND MAINTENANCE 84 1 Open the bypass tray, and then open the side cover while pressing the side cover open button. 2 Push gently on both sides of the front cover to open the cover. 3 Gently pull the toner cartridge out while pressing the lock release lever. • After removing the toner...
Page 87 - Shutter
TROUBLESHOOTING AND MAINTENANCE 85 8 4 Remove the toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally four or five times. After shaking the cartridge, remove the toner seal. 5 Gently insert the toner cartridge along the guides until it locks in place while pushi...
Page 88 - SCAN HEAD LOCKING SWITCH; the unit will not operate. Unlock the switch (; Lock
TROUBLESHOOTING AND MAINTENANCE 86 6 Close the front cover and then the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up. 7 SCAN HEAD LOCKING SWITCH The scan head locking switch is under the original t...
Page 89 - CHECKING THE TOTAL COUNT; display the count of each function.; MAINTENANCE REQUIRED
87 8 CHECKING THE TOTAL COUNT You can check the total number of pages output by the machine (all pages printed by the copy function and printer function), as well as the output counts of each function (number of copies, number of scanned pages, number of faxes, etc.). When a count reaches 999,999 it...
Page 90 - CLEANING THE MACHINE; Cabinet; Wipe the cabinet with a soft, clean cloth.; Document glass/scanning window
88 CLEANING THE MACHINE Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to clean the machine on a regular basis. Cabinet Wipe the cabinet with a soft, clean cloth. Document glass and the back side of the document cover/SPF/RSPF Stains on the glass, SPF/RSP...
Page 91 - Transfer charger
TROUBLESHOOTING AND MAINTENANCE 89 8 Transfer charger 1 Turn the power switch off. (p.13) 2 Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button. 3 Take the charger cleaner out by holding the tab. Set the charger cleaner onto the right end of the...
Page 92 - This allows the machine to be used as a facsimile machine.; OPTIONAL EQUIPMENT
90 9 Chapter 9 SYSTEM CONFIGURATION A number of options are available for the unit which allow you to configure a system to meet your particular needs. The options include the following. FACSIMILE EXPANSION KIT (AR-FX9) This allows the machine to be used as a facsimile machine. NETWORK EXPANSION KIT...
Page 93 - Misfeed removal; The copier will stop when a misfeed ocurs. The misfeed (; blinks and the misfed; Lower side cover
91 9 250-SHEET PAPER FEED UNIT (AR-D16) The paper feed unit provide the convenience of increased paper capacity for the unit and a greater choice of paper size readily available for copying.The procedures for loading paper in the paper tray of paper feed unit, changing the paper size, and selecting ...
Page 94 - Using the AR-D16 with the printer function; Please purchase the appropriate cable for your computer.; USB interface cable; Supply; TD cartridge
OPTIONAL EQUIPMENT 92 Using the AR-D16 with the printer function To use the AR-D16 with the printer function, follow these steps to adjust the settings in the printer driver. 1 Click the "start" button. 2 Click "Control Panel", select "Printer and Other Hardware", and then cl...
Page 95 - SPECIFICATIONS; APPENDIX
93 10 Chapter 10 10 SPECIFICATIONS Model AR-M150 AR-M155 Type Digital Multifunctional System, Desktop Photoconductive type OPC drum Document glass type Fixed Copy/printing system Dry, electrostatic transfer Originals Sheets, bound documents Originals size Max. A4 (8-1/2" x 14") Copy size Max...
Page 97 - Printer Function; SPLC (Sharp Printer Language with Compression)
APPENDIX 95 10 Printer Function Print speed 15ppm Resolution 600 dpi Memory Approx. 10MB Emulation SPLC (Sharp Printer Language with Compression) Interface IEEE 1284-compliant bi-directional parallel interfaceUSB 2.0 (Full-Speed/Hi-Speed compatible interface) Interface cables [USB cable]USB cable th...
Page 98 - Scanner Function; Flatbed scanner
APPENDIX 96 Scanner Function Network Expansion kit (AR-NB2N) * Available only if the PS3 expansion kit (AR-PK1) is installed. Type Flatbed scanner Scanning method Document glass/SPF/RSPF Light source Tri-color CCD light source (CCD: 3 components; R, G, and B) Resolution* Basic: 600 dpi x 1200 dpiSet...
Page 99 - Drawn from the machine
APPENDIX 97 10 Single Pass Feeder (AR-SP8)/Reversing Single Pass Feeder (AR-RP8) 250-sheet paper feed unit (AR-D16) For the specifications of expansion kit AR-FX9, please refer to the AR-FX9 fax operation manual itself. Acceptable originals Weight: 52 g /m 2 to 90 g /m 2 (14 lbs. to 23.9 lbs.) Size:...
Page 100 - SOFTWARE LICENSE; PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY
98 SOFTWARE LICENSE PLEASE READ THIS LICENSE CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. 1. License. The application, demonstration, system and other software accompanying this License, whether on disk, in read only memory, o...
Page 102 - INDEX; Symbols; Connecting the machine to your computer
100 INDEX Symbols [ ] key.......................... 10, 27, 29, 32 [ ] key ........................................... 10 [ ] key ........................................... 10 2 2 IN 1 copy ....................................... 31250-sheet paper feed unit .......... 90, 96[2-SIDED COPY( )] key . ...
Page 105 - INDEX BY PURPOSE; Preparations; Copying; Using convenient copy functions; IN 1 copying, using; Connecting the computer
103 INDEX BY PURPOSE Preparations Paper, loading - Bypass tray................................... 17- Paper tray ..................................... 15 Power, turn off ................................... 13Power, turn on ................................... 12Scan head locking switch, releasing ......
Page 106 - MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Page: 1/4 Date Revised :Jan.10.2003 Date Issued :Nov. 1. 2000 MSDS NO. F-01001 1.PRODUCT AND COMPANY IDENTIFICATION Product Name : AR-152NT / AR-152T / AR-152ST / AR-152FT / AR-152ST-C / AR-152NT-J (Black Toner) Supplier Identification : Sharp Corporation 22-22 Nagaike-cho...
Page 115 - Laserstrahl; VARNING
CAUTIONVORSICHTADVARSEL ADVERSELVARNINGVARO! INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.AVOID EXPOSURE TO BEAM. UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UNDSICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN. USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRY...
Page 116 - PRINTED IN FRANCE