Samsung SCC-C4355P - Manual

English _ English ImPORTANT SAFETy INSTRUCTIONS Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.D...

overview _ overview CONTENTS OvERvIEW 2 5 Important Safety Instructions 6 Contents 7 Features 8 What’s Included 8 At a Glance INSTALLATION & CONNECTION 12 12 Preparing Installation 12 Installation SETUP 15 15 Main Menu 16 Profile 18 Camera Set 27 Intelligent Video 29 Privacy Zone 30 Preset 31 Ot...

English _ English FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented.High Sensitivity: It implements images of high sensitivity using the up-to-date Super-HAD IT CCD(SCC-C4253P/C4353P)/E...

overview _ overview AT A GLANCE SIDE vIEW Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. M  WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Camera Camera Holder (Mount Adaptor) 2 Screws ...

English _ English Rear Panel � � � � � � � � � � � � [Z\\ [Z\Z SCC-C4353P � � � � � � � � � � � � [Y\\ [Y\Z SCC-C4253P  Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. [Y\\V[Z\\ [Y\ZV[Z\Z SCC-C4355P � � � � ...

overview 10_ overview 1. ALARM OUT Alarm out jack for motion detection. (Open Collector, On Gnd)2. GND Grounding jack.3. TRIGGER IN (SCC-C4255P/C4355P)Displays the current still image when it receives the Trigger signal. (Normal Open Type)4.5.6 FOCUS, COM, ZOOMThis port is used for ZOOM/FOCUS, MENU ...

English _11 English * 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.8. DAY/NIGHT IN This is a ...

1_ installation & connection installation & connection PREPARING INSTALLATION To install and use the camera, first prepare the following cables.  Power Adapter Cable (sold separately) The requirements for the power adapter, which connects to the camera’s POWER IN terminal, are as follows: -...

installation & connection 1_ installation & connection 4. Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet. 5. If the camera operates normally, the following screen will be displayed for 5 seconds and then disa...

English _1 English setup Using OSD icons _+ : If these icons appear in the left and right corner of a menu item, you can use them move to the previous or next menu. (EXIT): Exits the menu setup screen. Before exiting the setup screen, select < SAvE > to save your settings to the whole menus, o...

1_ setup setup CAmERA SET You can configure the general settings of the camera module. Select < mAIN mENU > - < CAmERA SET >. The Camera Setup menu appears.Change the settings as necessary, or select an item to check. CAmERA ID Provide the ID and location for a camera that displays on th...

English _1 English IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. ALC : Adjust the open and close of the iris.- LEVEL : Select an overall brightness level.- BLC : With < BACKLIGHT > set to < BLC >, you can specify the BLC area. With A...

0_ setup setup AGC With this, you can adjust the AGC level of a camera. With AGC active, if the signal strength falls below the standard level, AGC will amplify the video signal to automatically improve the sensitivity. If < SENS-UP > is set to < OFF > or < FIx > mode, the < mOT...

English _1 English SHUTTER You can select a fixed fast electronic shutter speed in 7 options ranging from 1/120 to 1/10k, which is mostly used to take a picture of a fast moving object. As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not availabl...

English _ English If < BACKLIGHT > is set to < BLC >, the MASK AREA function is not available. EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you use an infrared light source while in AUTO mode, this may cause a failure in AUTO SWITCH ...

_ setup setup Select < CAmERA SET > - < WHITE BAL >. Select a mode where you set the < WHITE BAL >. DAY : You can set the RED, and BLUE value in DAY mode. The screen will be displayed in colors according to your settings. You can set the R-GAIN, and B-GAIN value only in < AWC &g...

English _ English FOCUS mODE You can select a focus mode according to the angle that you adjusted for camera recording.- AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in < mF >. This will also restore focu...

_ setup setup v-SyNC You can set the V-SYNC mode.- If you select < INT >, the camera will use the internal synchronization. - If selecting < LINE >, the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. It’s a must to use AC 24V...

English _ English If you set the digital zoom to a larger ratio than the actual enlargement for compensation, the < DIS > function will be disabled. < DIS > may not work properly in the following images: Flat, i.e., no regular-patterned image / Low contrast scene / High frequency image t...

_ setup setup mASK AREA Select the number of the area to be masked that will be excluded from motion detection.Select the mask number and set the mask size and its coverage. DISPLAy When selected < ON >, it displays the motion detected and detection of configured advanced function. SENSITIvITy...

English _ English PRIvACy ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. Zone Setup Select < mAIN mENU >-< PRIvACy ZONE >. Select the number of the zone and press [ ENTER ]. The Zone setup screen appears.Select the < ZOOm > and...

English _1 English OTHER SET You can reset the system by running FACTORY DEFAULTS, or set the font color etc. Select < mAIN mENU >-< OTHER SET >. Select each item and set appropriately. ExTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate scr...

_ setup setup CTRL TyPE By inputting the wire remote port, you may set up the A, B, C or D mode. Code Tele Wide Far Near A -6V +6V +6V -6V B -6V +6V -6V +6V C +6V -6V +6V -6V D +6V -6V -6V +6V COmmUNICATION You can set the RS-485 communications setting in regard of the camera. Select < mAIN mENU ...

English _ English LANGUAGE You can set the language of the user interface. Select < mAIN mENU >-< LANGUAGE >. Select your language using the up/down keys. 1.2.  LANGUAGE   ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO EU ENGLISH.indd 33 2009-9-10 13:53:52

appendix _ appendix SHORTCUT KEyS You may control this camera by using Controller (SSC-5000). Function Key CAmERA SET DAY/NIGHT - DAY [PRESET] + [5] + [1] + [2] + [ENTER] DAY/NIGHT - NIGHT [PRESET] + [5] + [1] + [3] + [ENTER] DAY/NIGHT - AUTO [PRESET] + [5] + [1] + [4] + [ENTER] DAY/NIGHT - EXT [PRE...

English _35 English SpEcificationS item Description product type Power Zoom Camera power Source SCC-C4253P/SCC-C4255P: DC12VSCC-C4353P/C4355P : AC 24V(50Hz), DC 12V power consumption SCC-C4253P, SCC-C4255P: 4.2WSCC-C4353P, SCC-C4355P: 5.6W tV Standard PAL STANDARD COLOR SYSTEM image Sensor SCC-C4255...

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charge...