Page 2 - overview; CAUTION; CAUTION; WARNING
2_ overview overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric ...
Page 3 - English; fi re or electric shock.; Install it in a place with good ventilation.
English _3 English fi re or electric shock. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fi re or electric shock. If this product fails to o...
Page 4 - IMPORTANT SAFETY INSTRUCTIONS
overview 4_ overview IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instr...
Page 5 - CONTENTS; OVERVIEW
English _5 English CONTENTS OVERVIEW 2 4 Important Safety Instructions 5 Contents 6 Features 7 What’s Included 7 Part Names and Functions INSTALLATION & CONNECTION 11 11 Preparing Installation 11 Connecting the Cables SETUP 14 14 Main Menu 15 Profi le 17 Camera Set 26 Intelligent Video 28 Privac...
Page 6 - FEATURES; White Balance to control the brightness to the illumination
overview 6_ overview FEATURES With the state-of-the-art digital signal processing technology, full digital image processing and special algorithm of 600-line high resolution implemented. High Sensitivity: It implements images of high sensitivity using the up-to-date Super-HAD IT CCD(SCC-C4237P/C4337...
Page 7 - PART NAMES AND FUNCTIONS; SIDE VIEW; WHAT’S INCLUDED; Camera; Camera Lens
English _7 English PART NAMES AND FUNCTIONS SIDE VIEW Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. M WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Camera Camera Holder (Mount Adapto...
Page 8 - Rear Panel; Input/Output Connector
overview 8_ overview Rear Panel SCC-C4337P SCC-C4237P Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. SCC-C4339P SCC-C4239P SCC-C4239P/C4339P SCC-C4237P/C4337P SCC-C4239P-TRK-ENG.indd 8 SCC-C4239P-TRK-ENG.ind...
Page 10 - installation & connection; SETUP Switch; ef; Video OUT Port
10_ installation & connection * 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUTPower supply jack for RS-485 JIG. Use within typical DC +5V 100mA. 8. DAY/NIGHT...
Page 11 - PREPARING INSTALLATION; To install and use the camera, fi rst prepare the following cables.; OUT to the monitor.; INSTALLATION
English _11 English installation & connection PREPARING INSTALLATION To install and use the camera, fi rst prepare the following cables. POWER ADAPTER CABLE (SOLD SEPARATELY) The requirements for the power adapter, which connects to the camera’s POWER IN terminal, are as follows: - SCC-C4237P/C4...
Page 13 - accordingly. Next, plug the power adapter into a wall outlet.
English _13 English 4. Determine the type of power supply and set the POWER SELECTION switch accordingly. Next, plug the power adapter into a wall outlet. 5. If the camera operates normally, the following screen will be displayed for 5 seconds and then disappears. 6. The requirements for RS485 contr...
Page 14 - setup; Using OSD icons; MAIN MENU
14_ setup setup Using OSD icons ◄► : If these icons appear in the left and right corner of a menu item, you can use them move to the previous or next menu. (EXIT): Exits the menu setup screen. Before exiting the setup screen, select < SAVE > to save your settings to the whole menus, or < QU...
Page 17 - You can confi gure the general settings of the camera module.; CAMERA ID; Use; LOCATION : Specify the display position of the camera ID.; VPS; ON
English _17 English CAMERA SET You can confi gure the general settings of the camera module. Select <MAIN MENU> - <CAMERA SET>.The Camera Setup menu appears. Change the settings as necessary, or select an item to check. CAMERA ID Provide the ID and location for a camera that displays on ...
Page 18 - IRIS; ALC : Adjust the open and close of the iris.
18_ setup setup IRIS The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera. ALC : Adjust the open and close of the iris. - LEVEL : Select an overall brightness level.- BLC : With < BACKLIGHT > set to < BLC >, you can specify the BLC area. With ARE...
Page 19 - AGC; > menu will switch to; MOTION; AUTO
English _19 English AGC With this, you can adjust the AGC level of a camera.With AGC active, if the signal strength falls below the standard level, AGC will amplify the video signal to automatically improve the sensitivity.If < SENS-UP > is set to < OFF > or < FIX > mode, the < ...
Page 20 - SHUTTER; FLICKERLESS; XDR
20_ setup setup SHUTTER You can select a fi xed fast electronic shutter speed in 7 options ranging from 1/120 to 1/10k, which is mostly used to take a picture of a fast moving object. As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT to WDR, the SHUTTER menu is not available....
Page 22 - BACKLIGHT; WHITE BAL; set a mode for correcting the <
22_ setup setup If < BACKLIGHT > is set to < BLC >, the MASK AREA function is not available. EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you use an infrared light source while in AUTO mode, this may cause a failure in AUTO SWITCH or...
Page 24 - FOCUS MODE; MF; ZOOM SPEED
24_ setup setup FOCUS MODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in < MF >. This will also restore focus...
Page 25 - AGC COLOR SUP; You can set the video brightness signal to normal or reverse.; PIP; You can view a main image with a sub image on the same screen.; DIS
English _25 English V-SYNC You can set the V-SYNC mode. - If you select < INT >, the camera will use the internal synchronization. - If selecting < LINE >, the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. It’s a must to use...
Page 26 - INTELLIGENT VIDEO; You can enable the motion detection and tracking functions.; DETECTION; ADVANCED; > option will mark a region if an existing object
26_ setup setup If you set the digital zoom to a larger ratio than the actual enlargement for compensation, the < DIS > function will be disabled. < DIS > may not work properly in the following images: Flat, i.e., no regular-patterned image / Low contrast scene / High frequency image tak...
Page 27 - SENSITIVITY; Sets the sensitivity of motion sensor.; RESOLUTION
English _27 English MASK AREA Select the number of the area to be masked that will be excluded from motion detection. Select the mask number and set the mask size and its coverage. DISPLAY When selected < ON >, it displays the motion detected and detection of confi gured advanced function. SEN...
Page 28 - Zone Setup; to locate zoom position.
28_ setup setup PRIVACY ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. Zone Setup Select <MAIN MENU>-<PRIVACY ZONE>. Select the number of the zone and press [ENTER].The Zone setup screen appears. Select the <ZOOM> and press [EN...
Page 29 - Select the preset number.; For entering the name, refer to “
English _29 English PRESET This function provides preset camera settings such as zoom and focus so to enable quicker and easier accessing and monitoring, which supports up to 512 presets. Select <MAIN MENU>-<PRESET>. Select the preset number. Select <POSITION>. Set <PRESET ID>...
Page 30 - OTHER SET; EXTERNAL TRG; TIME; If; FACTORY DEFAULTS
30_ setup setup OTHER SET You can reset the system by running FACTORY DEFAULTS, or set the font color etc. Select <MAIN MENU>-<OTHER SET>. Select each item and set appropriately. EXTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen. Yo...
Page 31 - CTRL TYPE; Code; Select each item and set appropriately.; You can check the system information.
English _31 English CTRL TYPE By inputting the wire remote port, you may set up the A, B, C or D mode. Code Tele Wide Far Near A -6V +6V +6V -6V B -6V +6V -6V +6V C +6V -6V +6V -6V D +6V -6V -6V +6V COMMUNICATION You can set the RS-485 communications setting in regard of the camera. Select <MAIN ...
Page 32 - LANGUAGE; You can set the language of the user interface.
32_ setup setup W LANGUAGE X ENGLISH ENGLISH P У CCKN Й P У CCKN Й POLSKI POLSKI Č ESKY Č ESKY TÜRKÇE TÜRKÇE LANGUAGE You can set the language of the user interface. Select <MAIN MENU>-<LANGUAGE>. Select your language using the up/down keys. 1. 2. SCC-C4239P-TRK-ENG.indd 32 SCC-C4239P-TR...
Page 33 - appendix; SHORTCUT KEYS
English _33 English appendix SHORTCUT KEYS You may control this camera by using Controller (SSC-5000). Function Key CAMERA SET DAY/NIGHT - DAY [PRESET] + [5] + [1] + [2] + [ENTER] DAY/NIGHT - NIGHT [PRESET] + [5] + [1] + [3] + [ENTER] DAY/NIGHT - AUTO [PRESET] + [5] + [1] + [4] + [ENTER] DAY/NIGHT -...
Page 34 - SPECIFICATIONS
appendix 34_ appendix SPECIFICATIONS Item Description Product Type Power Zoom Camera Power Source SCC-C4237P/SCC-C4239P: DC12V SCC-C4337P/C4339P : AC 24V(50Hz), DC 12V Power Consumption SCC-C4237P, SCC-C4239P: 4.2W SCC-C4337P, SCC-C4339P: 5.6W TV Standard PAL STANDARD COLOR SYSTEM Image Sensor SCC-C...
Page 36 - Correct Disposal of This Product
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charg...
