Samsung SCC-B2335P - Manual

Page 2 - Safety information

2 – DIGITAL COLOR CAMERA Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. This symbol indicates high voltage is present inside. It is dange...

Page 4 - Important Safety Instructions

4 – DIGITAL COLOR CAMERA Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s i...

Page 5 - Contents

English – 5 ENG Contents Introduction Features 6 PRODUCT & ACCESSORIES 7 Part Names and Functions 8 Installation Connecting the Auto Iris Lens Connector 11 Mounting the lens 11 Connecting cables and checking operation 12 How to use OSD Menu Using Icons in the Menu 13 Main Menu 13 Proﬁ le 14 Came...

Page 6 - FEATURES

6 – DIGITAL COLOR CAMERA Introduction FEATURES High Resolution This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. VPS(Virtual Progressive Scan) This is an advanced technology that reproduces a sharp progressive ...

Page 7 - PRODUCT & ACCESSORIES

English – 7 ENG Introduction and h t ting ure e. ra t PRODUCT & ACCESSORIES Product & Accessories ❖ Accessories • Camera Camera Holder(Mount) Auto Iris Lens Connector User’s Manual Main Product • C Mount Adapter

Page 8 - PART NAMES AND FUNCTIONS

8 – DIGITAL COLOR CAMERA Introduction PART NAMES AND FUNCTIONS Side View ❖ Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. Auto Iris Lens Control Cable This cable transmits the power and signals from the camera fo...

Page 10 - ef

10 – DIGITAL COLOR CAMERA Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function Description 1 ALARM OUT Alarm out port for motion detection. (Open collector type) 2 GND Grounding Port. 3...

Page 11 - Installation; MOUNTING THE LENS

English – 11 ENG he e the ress Installation CONNECTING THE AUTO IRIS LENS CONNECTOR Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following Pin No. DC Control Type Video Control Type 1 Damp(-) Power (+12V) 2 Damp(+) Not applicable 3 Drive(+) Video Signal 4 Driv...

Page 12 - USI

12 – DIGITAL COLOR CAMERA Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. ③ Finally connect the power adapter to the camera. You can c...

Page 13 - USING ICONS IN THE MENU; How to use OSD Menu

English – 13 ENG wer USING ICONS IN THE MENU (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. (RET) Returns to the previous menu. (HOME) Returns to the main menu. (SAVE) Used to save your settings of MASK AREA, PRIVACY ZON...

Page 16 - CAMERA SETUP; cdef

16 – DIGITAL COLOR CAMERA How to use OSD Menu CAMERA SETUP e CAMERA SET f CAMERA ID OFF VPS OFFIRIS ALC MOTION (F.FAST)---DNR MIDSHUTTER OFFSENS-UP AUTO X4 FLICKERLESS (OFF)---XDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFFDETAIL [2]V-SYNC INTAGC COLOR SUP LOWREVERSE OFFPOSI/NEGA +PIP OFF d c ...

Page 22 - INT

22 – DIGITAL COLOR CAMERA How to use OSD Menu DIGITAL ZOOM [ON/OFF] You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON , you will see the appropriate screen. When the zoom factor and position are deﬁ ned, the digital zoom function...

Page 24 - PRI

24 – DIGITAL COLOR CAMERA How to use OSD Menu - How to set the area AREA PIXEL LEVEL [4] <SIZE> <LOCATION> ① If you press the SETUP switch with the AREA option set to ON , you can specify the position and size of the area. ② If you change the PIXEL LEVEL for setting the position, spe...

Page 25 - PRIVACY ZONE SETUP

English – 25 ENG How to use OSD Menu nd n or on en a era PRIVACY ZONE SETUP e PRIVACY ZONE f 1 2 3 4 5 6 7 8 9 10 11 12 PRIVACY SET ON STYLE MOSAIC1 The PRIVACY function will protect your privacy by screening the privacy area that you have speciﬁ ed during monitoring. You can specify up to 12 privac...

Page 26 - OTHER SET; COMMUNICATION; SYS

26 – DIGITAL COLOR CAMERA How to use OSD Menu OTHER SET e OTHER SET f EXTERNAL TRG OFF FACTORY DEFAULTS OSD COLOR BW EXTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen. EXTERNAL TRG STILL TIME OFF DELAY TIME FIX You can set the STILL TIME to...

Page 27 - SYSTEM INFORMATION; Camera Confi guration

English – 27 ENG How to use OSD Menu ure ol, ns. h the r the SYSTEM INFORMATION e SYSTEM INFO f TYPE 3_BOX_WDR_NPROTOCOL SAMSUNG ADDRESS 1COMM. TYPE RS-485,HALF BAUD RATE 9600 SERIAL NO. 000000000000000CAMERA VER. 0.50_090101 EEPROM VER. 0.50_090101 You can view the system information including the ...

Page 28 - Specifi cations; SPECIFICATIONS

28 – DIGITAL COLOR CAMERA Speciﬁ cations SPECIFICATIONS Items Sub-items SCC-B2335N Camera Type CCTV Camera (WDR & DAY/NIGHT) Image Device 1/3” Super-HAD PS CCD Pixels Total 811 x 508 Effective 768 x 494 Scanning System Interlace/Progressive Scanning Line 525 lines Frame 30 frame/1sec Horizontal ...

Page 32 - Correct Disposal of This Product

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charg...