Ridgid TS2400LS - Manual
Ridgid TS2400LS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – RULES FOR SAFE OPERATION
- Page 4 – SYMBOLS; SAVE THESE INSTRUCTIONS
- Page 5 – INSTALLATION
- Page 6 – USE
- Page 7 – NOTES
- Page 8 – OPERATOR’S MANUAL; Zero Clearance Insert
1
OPERATOR’S MANUAL
Zero Clearance Insert
AC1045
(For Use With Ridgid 10 in.
Table Saws TS3650
and TS2400LS)
Your Zero Clearance Insert
has been engineered and manufactured to our high standards for dependability, ease of opera-
tion, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 RULES FOR SAFE OPERATION Safe operation of this accessory requires that you read and understand this operator's manual, the operator’s manual for the table saw and all labels affixed to the tool. READ ALL INSTRUCTIONS n KNOW YOUR ACCESSORY. Read the operator's manual carefully. Learn the product's...
4 SYMBOLS SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this prod-uct. Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information. • Do not expose to rain or use i...
5 n Position the zero clearance insert until the key slot drops over the flat head screw. n The zero clearance insert should be flush with the table top. Adjust the four set screws as needed. (See Fig 2.) NOTE: If necessary, adjust the side positioning set screw found on the edge of the zero clearan...
