Ridgid R82320 - Manual

6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. Read The Operator’s Manual Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands S...

7 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, c...

8 CHARGER FEATURES PRODUCT SPECIFICATIONS Motor ...................................................................................................................................................................14.4 Volt DCSwitch..........................................................................

10 OPERATION Fig. 2 WARNING: Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result...

11 OPERATION OPERATION Ready to charge battery pack When battery pack reaches cooled temperature, charger begins fast charge mode W h e n b a t t e r y p a c k re a c h e s w a r m e d t e m p e r a t u re , c h a rg e r begins fast charge mode Charger pre-charges battery until normal voltage is rea...

12 OPERATION INSTALLING BITS See Figure 4. n Lock the switch trigger on the driver by placing the direc- tion of rotation (forward-reverse) selector in center lock position. n Remove the battery pack from the driver. n Pull the coupler away from the driver (1). n Insert driver bit to be used into th...

13 OPERATION SWITCH TRIGGER See Figure 7. n To turn your driver ON , depress the switch trigger. To turn it OFF , release the switch trigger. VARIABLE SPEED See Figure 7. This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled ...

14 MAINTENANCE WARNING: When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, als...

15 WARRANTY Proof of purchase must be presented when requesting war-ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after. This product is manufactured by One World Technologies, Inc. The trademark is licensed from RIDGID, Inc. All warranty communications...

16 983000-5763-24-06 (REV:01) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or vi...