Page 2 - Table of Contents; microEXPLORER
Table of Contents Safety Symbols ....................................................................................................2 General Safety Information Work Area Safety ...............................................................................................2Electrical Safety ..........
Page 3 - Digital Inspection Camera; microEXPLORERTM Digital Inspection Camera
microEXPLORER ™ Digital Inspection Camera microEXPLORER™ Digital Inspection Camera Record Serial Number below and retain product serial number which is located on nameplate. SerialNo.
Page 4 - WARNING; SAVE THESE INSTRUCTIONS!; Work Area Safety; Keep your work area clean and well lit.; Electrical Safety; Do not abuse the cord.; Safety Symbols; This symbol indicates the risk of electrical shock.
General SafetyInformation WARNING Read and understand all instructions.Failure to follow all instructions listedbelow may result in electric shock, fireand/or serious personal injury. SAVE THESE INSTRUCTIONS! Work Area Safety • Keep your work area clean and well lit. Cluttered benches and dark areas...
Page 5 - Personal Safety; Use personal protective equipment.; Service
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 3 Personal Safety • Stay alert, watch what you are doingand use common sense. Do not use electrical devices when tired or under theinfluence of drugs, alcohol, or medica-tions. A moment of inattention while oper-ating an electrical device ...
Page 6 - Description; Specifications; continuous use; Standard Equipment
contain moving parts. This increases the risk of entanglement injuries. • Do not use this device for personal in-spection or medical use in any way: This is not a medical device. This couldcause personal injury. • Always use appropriate personal pro-tective equipment while handling andusing the micr...
Page 7 - Figure 1 – System Components; FCC Statement; Tool Assembly; Figure 2 – Battery Cap
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 5 Figure 1 – System Components FCC Statement This device complies with Part 15 of theFCC Rules. Operation is subject to the fol-lowing two conditions: 1. This device may not cause harmful inter- ference. 2. This device must accept any inte...
Page 8 - Figure 4 – Cable Connections; To Install Camera Accessories; Figure 5. Then rotate the accessory; Figure 5; Figure 6 – Installing Accessories; To install an SD Card; Using the tab on the port cover; Buttons, Controls and Ports; Figure 7 – Port Cover
3. Battery removal and installation. A. To remove the battery pack, tilt unit slightly to slide battery into other hand. B. To install the battery, Insert contact end of rechargeable battery pack intothe microEXPLORER inspection cam-era, as shown in Figure 3. 4. Replace battery cover (Figure 2) and ...
Page 9 - Tool Inspection; Figure 9 – Warning Label; Figure 8 – ON/OFF Button
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 7 Tool Inspection WARNING Daily before use, inspect your inspec-tion camera and correct any problemsto reduce the risk of serious injury fromelectric shock and other causes andprevent tool damage. 1. Make sure the unit is OFF. 2. Remove th...
Page 10 - Operating Instructions
• Clear, level, stable, dry place for opera- tor. Do not use the inspection camerawhile standing in water. 2. Examine the area or space that you will be inspecting and determine if the micro-EXPLORER inspection camera is thecorrect piece of equipment for the job. • Determine the access points to the...
Page 11 - Figure 10 – Controls; Controls
8. Prepare the camera for inspection. The camera cable may need to be pre-formedor bent to properly inspect the area. Donot try to form bends less than 2" radius.This can damage cable. If inspecting adark space, turn the LEDs on before in-serting the camera or cable. Do not use excessive force t...
Page 12 - Icons; SD
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 10 Icons Battery Life Indicator – Fully charged battery. Battery Life Indicator – Less than 25% of battery charge remains. SD Card – Indicates an SD card has been inserted into the device. Still Camera – Indicates device is operating in st...
Page 13 - On Screen Navigation; Figure 11 – Splash Screen; – Indicates image or video has been saved to memory.
indicator bar will be displayed on the screenas you adjust brightness. Figure 13 – Adjusting LED Zoom The microExplorer inspection camera has a3X digital zoom. Simply press the up anddown arrows while in the live screen to zoomin or out. A zoom indicator bar will be dis-played on the screen as you a...
Page 14 - Pan; Pressing select while on the playback icon; Figure 15 – Primary Settings Screen
Ridge Tool Company 12 microEXPLORER ™ Digital Inspection Camera Change From Still Image Capture to Video The microEXPLORER inspection camera de-faults to still image capture when poweredON. To switch to video mode, enter the pri-mary settings screen, use the down arrow toselect the mode icon and use...
Page 15 - Entering the Secondary Settings Screen; Figure 18 – Secondary Settings Screen
13 Figure 16 – Thumbnails Icon Figure 17 – Thumbnails View Pressing the trash can button while on animage will bring up a text box asking you ifyou are sure you want to delete the image. Ifyou want to delete the image, highlight thecheck mark , and press select. If you donot want to delete the image...
Page 17 - Figure 26 – My Computer Icon; Figure 28 – DCIM Folder; Cleaning Instructions; Remove batteries before cleaning.
microEXPLORER ™ Digital Inspection Camera Manually Saving Images to YourComputer’s Hard Drive. 1. Use the USB cable to connect the microEXPLORER inspection camera tothe computer as shown in Figure 19. 2. Place the small side of the USB cable into the mini USB port in the micro-EXPLORER inspection ca...
Page 18 - Accessories; Storage; Catalog
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 16 • Use only alcohol swabs to clean the con- nections. • Wipe the hand held display unit down with a clean dry cloth. Accessories WARNING Only the following tool accessorieshave been designed to function withthe microEXPLORER inspection c...
Page 19 - Battery and Charger; SYMPTOM; Unit will not turn ON.; Troubleshooting
microEXPLORER ™ Digital Inspection Camera Battery and Charger Battery Pack/Battery ChargerSafety WARNING To reduce the risk of serious injury, readthese precautions carefully before usingthe battery charger or battery. Battery Charge Safety • Charge only the RIDGID rechargeablebattery listed in the ...
Page 20 - Figure 31 – Battery and Charger; Figure 32 – Label on Charger
microEXPLORER ™ Digital Inspection Camera Ridge Tool Company 18 • Do not insert the battery with crackedcase into charger. Damaged batteries increase the risk of electrical shock. • Never disassemble battery. There are no user-serviceable parts inside the batterypack. Disassembling batteries may cau...
Page 21 - Figure 33 – Label on Battery; Proper operating temperature range.
Figure 33 – Label on Battery 4. Select the appropriate location for the charger before use. Check work areafor: • Adequate lighting. • Flammable liquids, vapors or dustthat may ignite. If present, do not work in area until sources have been identi-fied and corrected. The charger is notexplosion proo...
Page 22 - Li-Ion Battery Charger Accessories; Store the charger and the bat-; Service and Repair; Disposal; Charger DC Adapter
Accessories WARNING Only the following accessories havebeen designed to function with theRIDGID Li-Ion Battery Charger (CatalogNumber 30758) To prevent serious in-jury, use only accessories specificallydesigned and recommended for use withthe RIDGID Li-Ion Battery Charger, suchas those listed below....
Page 23 - Caméra d’inspection numérique; Caméra d’inspection numérique microEXPLORERTM; AVERTISSEMENT
Caméra d’inspection numérique microEXPLORER ™ Caméra d’inspection numérique microEXPLORER™ Notez ci-dessous le numéro de série inscrit sur la plaque signalétique de l’appareil pour future référence. Nº de série AVERTISSEMENT Familiarisez-vous avec ce moded’emploi avant d’utiliser l’appareil.L’incomp...
Page 24 - Table des matières; Sécurité de la caméra d’inspection numérique microEXPLORER; Caméra d’inspection numérique microEXPLORER
Table des matières Symboles de sécurité ........................................................................................23 Consignes générales de sécurité Sécurité du chantier .........................................................................................23Sécurité électrique ........
Page 25 - MISE EN GARDE; CONSERVEZ CES INSTRUCTIONS !; Sécurité du chantier; Les appareils électriques; Sécurité électrique; Les; Symboles de sécurité
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 23 Consignes générales desécurité MISE EN GARDE Familiarisez-vous avec l’ensemble dumode d’emploi. Le non-respect des con-signes d’utilisation et de sécurité ci-après augmenterait les risques de chocélectrique, d’incendie et/ou de grav...
Page 26 - longe électrique adaptée.; Sécurité individuelle
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 24 longe électrique adaptée. L’utilisation d’une rallonge électrique homologuée pourusage extérieur limitera les risques dechoc électrique. • S’il est nécessaire d’utiliser un appareilélectrique dans des lieux mouillés, pré-voyez une s...
Page 28 - Équipements de base; Figure 1 – Composants du système; Avertissement FCC; Cet appareil ne doit pas produire d’in-
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 26 Dimensions : Longueur ...................267 mm (10.5") Largeur ......................105 mm (4.13") Hauteur ......................60 mm (2,36") Affichage : Résolution .................320 x 240 RGBType d’écran ............
Page 29 - Figure 2 – Couvercle du logement de piles
Caméra d’inspection numérique microEXPLORER ™ 27 Ridge Tool Company • Augmentez la distance entre le mat- ériel et le récepteur. • Consultez le concessionnaire ou un technicien radio/télé compétent pourobtenir de l’aide. Selon le sous-titre B de l’article 15 de la ré-glementation FCC, la conformité ...
Page 30 - Tirez sur la languette du cache-prise; Touches, commandes et ports; Figure 7 – Cache-prise; Inspection de l’appareil; Retirez le bloc-piles afin de l’examiner; Figure 8 – Touche marche/arrêt
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 28 Montage des accessoires decaméra Les trois accessoires livrés (miroir, crochet etaiment) se montent tous sur la tête de camérade la même manière. Pour ce faire, tenez la tête de caméra commeindiqué à la Figure 5. Engagez la partie s...
Page 31 - Figure 9 – Étiquette de sécurité
Caméra d’inspection numérique microEXPLORER ™ 29 Ridge Tool Company la caméra d’inspection microEXPLOR-ER si le bloc-piles est endommagé. 3. Nettoyez l’appareil, et notamment ses poignées et commandes, afin d’éliminertoutes traces d’huile, de graisse ou decrasse qui pourraient nuire à sa prise enmai...
Page 32 - Utilisation de l’appareil
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 30 • Établissez la possibilité de rencontrer des liquides en cours d’inspection. Lecâble et la tête de caméra sontétanches jusqu’à une profondeur decolonne d’eau de 10 pieds. Une pro-fondeur supérieure risque de provo-quer des fuites a...
Page 33 - Figure 10 – Commandes; Commandes; Indicateur de charge
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 31 Ne forcez pas sur le câble lors de son in- sertion ou son retrait. Cela risqueraitd’endommager les circuits électriquesde l’appareil ou bien l’objet en cours d’in-spection lui-même. Ne vous servez pasdu câble ou de la tête de caméra...
Page 34 - Icônes
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 32 Icônes (suite) Mode lecture – Le fait d’appuyer sur cette icône permet de visualiser et d’effacer les photos et vidéos sauvegardées. Mode – Le fait d’appuyer longuement sur cette icône permet de naviguer entre les modes photo et vid...
Page 35 - Figure 13 – Réglage des LED; Navigation de l’écran; Figure 11 – Écran de garde
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 33 Figure 13 – Réglage des LED Zoom La caméra d’inspection microEXPLORER estpourvue d’un zoom numérique 3X. En modedirect, il s’agit simplement d’appuyer sur lesflèches haute et basse pour augmenter oudiminuer le zoom. Lors du réglage,...
Page 36 - pour naviguer entre les saisies en « Photo »; Balayage; Figure 15 – Écran de programmation principal; pour afficher l’icône des vignet-
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 34 pour naviguer entre les saisies en « Photo » et « Vidéo » . Activation et désactivation du systèmede nivellement automatique (tête en haut) La caméra d’inspection microEXPLORER estéquipée d’un système de nivellement au-tomatique app...
Page 37 - Figure 16 – Icône des vignettes; , puis appuyez sur la touche de sélection.; Figure 18 – Écran de programmation sec-; Comme indiqué à la
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 35 Figure 16 – Icône des vignettes Figure 17 – Vignettes affichées Lorsqu’une image est à l’écran et que l’onappui sur l’icône « Poubelle » , une boîtede dialogue apparaît demandant confirmationde l’effacement de l’image. Pour effacer ...
Page 38 - Figure 20 – Fenêtre de copie de photos
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 36 tion microEXPLORER affichera alors lamention « USB Connected » (USB bran-ché). 5. L’écran suivant sera alors affiché à l’écran de l’ordinateur. Sélectionnez « Copy pic-tures to a folder on my computer» (Copierimages vers un fichier ...
Page 39 - Figure 24 – Fenêtre « Autre option »
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 37 Figure 24 – Fenêtre « Autre option » 11. Cliquez sur « finish » (terminer) à l’écran suivant afin de finaliser le processus desauvegarde. Figure 25 – Fenêtre « Terminer » Sauvegarde manuelle de fichiers sur ledisque dur de l’ordinat...
Page 40 - Figure 30 – Fenêtre d’image; Consignes de nettoyage; Accessoires; Stockage; catalogue
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 38 Figure 29 – Fichier 100SNAKE 9. Sélectionnez l’image voulue en cliquant à droite, puis sélectionnez « copie » à par-tir du menu déroulant. Figure 30 – Fenêtre d’image 10. Ouvrez le fichier où vous souhaitez sauvegarder l’image. 11. ...
Page 41 - Piles et chargeur; Sécurité du chargeur; D’autres types de; Dépannage; Un chargeur endommagé aug-
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 39 Seules des pièces de rechange d’originedoivent être employés lors de la réparation decet appareil. L’utilisation de pièces non con-formes augmenterait les risques de choc élec-trique ou autre blessure grave. En fin de touteintervent...
Page 42 - Figure 31 – Bloc-piles et chargeur
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 40 de charge des piles. Un bon entretien as-surera le bon fonctionnement des piles. Unmanque d’entretien risque d’entraîner desfuites d’électrolyte, voire des chocs élec-triques et des brûlures • Prévoyez une source d’alimentation ap-p...
Page 43 - Figure 32 – Avertissement du chargeur; Un éclairage suffisant.
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 41 NOTA ! Cet ensemble de chargeur et bloc-piles n’est en aucun cas compatible avecles autres chargeurs et piles au lith-ium/ion de la gamme RIDGID. Con-sultez la liste des accessoires pour lesréférences des piles compatibles avecce ch...
Page 44 - Accessoires pour chargeur lithium/ion; catalogue Description
Consignes de nettoyage AVERTISSEMENT Débranchez le chargeur avant toute ma-nipulation. Afin de limiter les risques dechoc électrique, n’utilisez pas d’eau oude produits chimiques lors du nettoy-age du chargeur ou des piles. 1. Retirez le bloc-piles du chargeur. 2. Éliminez toutes traces de crasse ou...
Page 45 - Un stockage long terme à; Recyclage; et d’autres fournisseurs
Caméra d’inspection numérique microEXPLORER ™ Ridge Tool Company 43 Un stockage long terme à des températures supérieures à 40ºC (104ºF)risquerait de diminuer la capacité de chargedu bloc-piles de manière permanente. Service après-vente etréparations AVERTISSEMENT Toute intervention mal exécutée ris...
Page 47 - Cámara digital de inspección; Cámara digital de inspección microEXPLORERTM; A D V E R T E N C I A
Cámara digital de inspección microEXPLORER ™ Cámara digital de inspección microEXPLORER™ Apunte aquí el número de serie del aparato. Lo encuentra en su placa de características. No. deserie A D V E R T E N C I A Lea detenidamente este Manual delOperario antes de usar este aparato.Cuando no se compre...
Page 48 - Índice; Seguridad de la cámara digital de inspección microEXPLORER; Cámara digital de inspección microEXPLORER
Índice Simbología de seguridad ..................................................................................47 Información de seguridad general Seguridad en la zona de trabajo ......................................................................47Seguridad eléctrica ..............................
Page 49 - ADVERTENCIA; ¡GUARDE ESTAS INSTRUCCIONES!; Seguridad en la zona de trabajo; Los bancos de trabajo; Seguridad eléctrica; Así se evita; Simbología de seguridad
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 47 Información de seguridad general ADVERTENCIA Lea y comprenda todas las instruc-ciones. Pueden ocurrir golpes eléctri-cos, incendios y/o lesiones personalesgraves si no se siguen todas las ins-trucciones detalladas a continuación. ¡GU...
Page 50 - Seguridad personal
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 48 • Al hacer funcionar un aparato eléctricoa la intemperie, emplee un cordón deextensión fabricado para uso exterior. Los alargadores diseñados para su em-pleo al aire libre reducen el riesgo de quese produzcan choques eléctricos. • Si...
Page 51 - Estas medidas de precaución; Mantenga una buena higiene.; Después; Descripción; Recomendada para
Cámara digital de inspección microEXPLORER ™ 49 Ridge Tool Company El maletín de la cámara de inspecciónmicroEXPLORER cuenta con un compar-timiento especial para guardar este manualal alcance de su mano. Si tiene cualquier pregunta, llame al De-partamento de Servicio Técnico de RidgeTool Company al ...
Page 52 - Ambiente de funcionamiento:; Equipo estándar; Figura 1 – Componentes del sistema; Comunicado de la FCC; El aparato no debe generar interferencias; Ensamblaje del aparato; ¡NOTA! La pila viene parcialmente cargada.
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 50 Pantalla tipo ...............cristal líquido (LCD) de 3,5 pulgs. TFT Ambiente de funcionamiento: Temperatura ..............entre los 0 y 45°C (32 a 113°F) Humedad ...................sin condensación (vi- sualizador) 5 a 95% Temperatu...
Page 53 - Figura 2 – Tapa del compartimiento de la pila
Cámara digital de inspección microEXPLORER ™ 51 Ridge Tool Company Se recomienda cargarla completa-mente antes de usarla. Vea la sec- ción sobre la pila y el cargador. Cómo sacar o instalar elbloque de pilas: ¡NOTA! No deje de leer la sección Seguridad del bloque de pilas y del cargador. 1. Con sus ...
Page 54 - Figura 7 – Tapa cubrepuertos; Inspección del aparato; Figura 8 – Botón de encendido y
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 52 Instalación de la tarjeta dememoria SD Abra y levante la tapa cubrepuertos (Figura 7) mediante su lengüeta para dejar la ranura dela tarjeta SD al descubierto. Introduzca la tar-jeta SD en la muesca fijándose en que loscontactos esté...
Page 55 - Figura 9 – Etiqueta de advertencias
Cámara digital de inspección microEXPLORER ™ 53 Ridge Tool Company Figura 9 – Etiqueta de advertencias 8. Compruebe que la cubierta del muelle de expansión esté bien cerrada. 9. Con sus manos secas, vuelva a instalar el bloque de pilas y asegure que la tapade su compartimiento esté bien cerrada. 10....
Page 57 - Figura 10 – Controles; Controles
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 55 10. Extraiga la pila y recurra a un servicio téc- nico calificado en cualquiera de estascircunstancias. • Si al aparato le ha caído líquido o le han entrado objetos extraños. • Si el aparato no funciona normalmente aunque se sigan to...
Page 58 - Íconos
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 56 Íconos (cont.) Menú – Seleccione este ícono para acceder al cuadro de posiciones (settings) secundarias. Autonivelación – enciende y apaga la autonivelación. El autonivelador del aparato mantiene la imagen constantemente en posición ...
Page 59 - Figura 13 – Ajuste de la luminosidad; Navegación en pantalla; Figura 11 – Pantalla de inicio
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 57 Figura 13 – Ajuste de la luminosidad Zoom La cámara de inspección microEXPLORERposee un zoom digital de 3X. Estando la pan-talla en vivo, sencillamente oprima las fle-chas ascendente y descendente para hacerun zoom in o un zoom out. ...
Page 60 - Autonivelación vertical de la imagen; y emplee las flechas derecha e izquierda; Toma de una imagen fija; Figura 15 – Pantalla de posiciones primarias; y oprima Seleccionar. Si usted no tiene la
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 58 cionar el ícono de modalidad y emplee losbotones de flechas derecha e izquierda paraefectuar el cambio entre Imagen Fija y Video . Autonivelación vertical de la imagen La cámara de inspección microEXPLORERofrece la singular caracterí...
Page 61 - Figura 16 – Ícono de Chinches; . Surgirá un texto que pregunta si usted; Figura 18 – Pantalla de posiciones secundarias
59 Cámara digital de inspección microEXPLORER ™ Ridge Tool Company Revisar y eliminar imágenes guardadasmientras se está en la vista de Chinches Mientras en la modalidad de Play-back,oprima Seleccionar . Se realzará el íconode Chinches (Figura 16). Luego oprima Seleccionar para acceder a la vista de...
Page 63 - C o n e c t e l a c á m a r a d e i n s p e c c i ó n
61 Cámara digital de inspección microEXPLORER ™ Ridge Tool Company Figura 24 – Otras opciones para sus fotos o videos 11. Haga clic en "Finish" (terminar) cuando aparezca la siguiente ventana y así finali-za el proceso de transferencia de lasimágenes. Figura 25 – Ventana de término del proce...
Page 64 - Accesorios; Almacenaje; cionada
Accesorios ADVERTENCIA Los accesorios siguientes son los úni-cos diseñados para emplearse en con-junción con la cámara de inspecciónm i c ro E X P L O R E R . O t ro s a c c e s o r i o saptos para usarse con otros aparatospueden tornarse peligrosos si se uti-l i z a n c o n l a c á m a r a d e i n ...
Page 65 - Cargador de pilas; Seguridad del cargador de la pila; SÍNTOMA; Detección de averías
63 Cámara digital de inspección microEXPLORER ™ Ridge Tool Company Cargador de pilas Seguridad del bloque de pilasy del cargador ADVERTENCIA Antes de usar el cargador de pilas y elbloque de pilas, lea estas precaucionescon el fin de evitar lesiones de gravedad. Seguridad del cargador de la pila • Só...
Page 66 - Figura 31 – Bloque de pilas y Cargador
Cámara digital de inspección microEXPLORER ™ Ridge Tool Company 64 superiores a -40°C (-40°F) y por debajode 40°C (104°F). La capacidad de una pila que se ha almacenado por largotiempo a temperaturas superiores a 40°C(104°F) puede verse reducida. Si se laprotege bien, la pila no sufrirá daños; encam...
Page 67 - Figura 32 – Etiqueta en el cargador; Pueda dejarse un espacio libre
65 Cámara digital de inspección microEXPLORER ™ Ridge Tool Company ¡NOTA! Este cargador y la pila que se carga en él, no son compatibles con ningún otromodelo RIDGID de cargadores o pilasli-ión. Consulte la sección Accesoriospara conocer cuál pila puede cargarseen este cargador. Inspección ypreparac...
Page 68 - Accesorios del Cargador de pilas li-ión; Almacenamiento
5. Completada la carga de la pila, con las manos secas, desenchufe el cargadordel tomacorriente. Instrucciones delimpieza ADVERTENCIA Desenchufe el cargador antes de limpiar-lo. No use agua ni productos químicospara limpiar el cargador o la pila. Así seevitan las descargas eléctricas. 1. Si hay una ...
Page 69 - Eliminación de las pilas; y otros proveedores de; Servicio y reparaciones
Ridge Tool Company 67 Eliminación de las pilas La presencia del sello de laRBRC™ (Rechargeable Bat-tery Recycling Corporation)en las cápsulas de pilas sig-nifica que RIDGID ha pagado por anticipado el costo del reciclaje de laspilas de litio-ión. RBRC™, RIDGID ® y otros proveedores de pilas han inic...
Page 71 - E M E R S O N . C O N S I D E R I T S O L V E D .; FULL LIFETIME
E M E R S O N . C O N S I D E R I T S O L V E D . ™ What is covered RIDGID ® tools are warranted to be free of defects in workmanship and material. How long coverage lasts This warranty lasts for the lifetime of the RIDGID ® tool. Warranty coverage ends when the product becomes unusable for reasons ...