Page 2 - Installation and Maintenance; Peculiar smells
2 Before you start... Thank you for buying theClassic cooker. It should give you many years’ trouble-free cooking if installed and operated correctly. It is, therefore, important that you read this section before you start, particularly if you have not used a gas cooker before.This appliance is desi...
Page 4 - Contents
4 Contents Hotplate burners Page 4 The Griddle Page 5 Warmer Page 5 The Grill Page 6 The Ovens Page 7 The Clock Page 7 Cooking using the timer Page 9 Oven cooking Page 10 ‘S’ (Slow) cooking Page 10 Oven shelves Page 11 The Handyrack Page 12 Oven light Page 12 Storage Page 12 Cleaning your cooker Pag...
Page 5 - Hotplate burners
5 Hotplate burners 1 The drawing by each knob indicates which burner that knob controls. This is the left hand front burner. 2 Each burner has a special safety device (FSD) that stops the flow of gas if the flame goes out. Press the igniter button, and push in and turn a knob to the large flame symbol ...
Page 6 - The Griddle; Warmer
6 The Griddle 1 The griddle fits a single pan support, front to back. It is designed for cooking food on directly. Don’t use pans of any kind on it. The griddle surface is non- stick and metal cooking utensils (e.g. spatulas) will damage the surface. Use heat resistant plastic or wooden utensils. 2 D...
Page 7 - The Grill; : Accessible parts may be hot
7 The Grill C AUTION : Accessible parts may be hot when the grill is in use. Young children should be kept away. 1 The burner does not glow red - food cooks from the heat of the flame. The first time you light the grill there may be a little smoke given off - this is perfectly normal. 2 Remove the pan...
Page 8 - To set the time of day
8 The Ovens The clock must be set to the time of day before the ovens will work. See ‘The Clock’ section of these instructions for how to set the clock.Before using for the first time, heat the ovens to Mark 7 for 30 minutes to dispel manufacturing odours. Open a window to clear the smell. 1 Push in ...
Page 10 - Cooking using the timer
10 The clock oven control functions are now locked. After a few seconds the display will revert to show the time of day and the key symbol ( ). To turn off the key lock Hold the Minute Minder ( ) and Cooktime ( ) buttons for about 8 seconds.‘Of’ will appear on the display. Press the ‘+’ button once....
Page 11 - Oven cooking
11 Oven cooking The wire shelves should always be pushed firmly to the back of the oven. Baking trays with food cooking on them should be placed level with the front edge of the oven’s wire shelves. Other containers should be placed centrally. Keep all trays and containers away from the back of the o...
Page 13 - Oven light; Storage
13 Oven light Press the appropriate button to turn on one of the oven lights. If one of the oven lights fail, turn off the power supply before you change the bulb. See the ‘Troubleshooting’ section for details on how to change an oven light bulb. Storage The bottom drawer is for storing oven trays a...
Page 14 - Cleaning your cooker; Essential information; Hotplate burners
14 Cleaning your cooker Essential information Before thorough cleaning isolate the electricity supply. Remember to switch on the electricity supply before use. Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or sa...
Page 15 - Grill
15 A electrode notch B ignition electrode Now fit the two trim rings, making sure that they are sitting down properly. Griddle Always clean the griddle after use. Allow to cool completely before removing. Immerse the griddle plate in hot soapy water. Use a soft cloth or, for stubborn stains, a nylon ...
Page 16 - Moving your cooker
16 Moving your cooker Switch off the electricity supply. The cooker is heavy, two people may be required to move it. The cooker is fitted with one roller at the front and two at the back. There are also two screw down levelling feet at the front. The front roller, designed for moving the cooker can b...
Page 17 - Troubleshooting
17 Troubleshooting Hotplate ignition or hotplate burners faulty Is the power on? Is the clock illuminated? If not there maybe something wrong with the power supply. See ‘power supply’ section further on. Are the sparker (ignition electrode) or burner slots blocked by debris? Is the burner trim corre...
Page 18 - Installation
18 be increased when other burners are in use. Are the oven burner ports blocked with spilt food? Oven temperature getting hotter as the cooker gets older If turning the knob down has not worked or only worked for a short time then you may need a new thermostat. This should be fitted by a service per...
Page 19 - Dear Installer; Installer’s Name; You will need the following equipment to complete the cooker; You will also need the following tools:
19 Dear Installer Before you start your installation, please complete the details BELOW.If your customer has a problem relating to your installation they will be able to contact you easily.Thank you Installer’s Name Installer’s Company Installer’s Telephone number You will need the following equipme...
Page 20 - Positioning the Cooker; Checking the parts; Unpacking the Cooker
20 Positioning the Cooker The diagrams below show the minimum recommended distance from the cooker to nearby surfaces. ���� ��� ���� ��� ����� ��� ArtNo.110-0004 110 Cooker min spacings ����� ��� ����� ��� The hotplate surround should be level with, or above, any adjacent work surface. Above hotplat...
Page 21 - Levelling; Moving the Cooker
21 Make sure you lower BOTH REAR ROLLERS. There are two adjusting nuts, one for each roller, at both the front bottom corners of the cooker.Unfold the rear edge of pack base tray. Carefully push the cooker backwards off the pack base and into position. Take care not to damage the power cable. Push t...
Page 22 - Fit the Handles; Fitting the splash back; Gas Connection
22 Fit the Handles Remove the 4mm Allen screws from the doors with the hexagon key tool. Use the screws to fit the door handles. The handles should be above the fixings. Remove the 4mm Allen screws from the top corners of the fascia and fix the front handrail in position. Fitting the splash back (optio...
Page 24 - Fitting the oven burner trim; Oven check; Fitting the plinth
24 Fitting the oven burner trim (supplied with some models only) The loose oven burner trim hooks onto the front of the oven burner bracket. Oven check The clock must be set to the time of day before the ovens will work. Press and hold as above. At the same time, press - or + until the correct time ...
Page 25 - Circuit Diagram
Page 26 - Technical Data; either
26 Technical Data This cooker is designed for use on either :- NATURAL GAS ES Cat I2H G20mbar at 20mbarES Cat 12E+, G20 at 20mbar/G25 at 25mbarFR/ES Cat I3+ G30 at 28mbar, G31 at 37mbar NB: THE NATURAL GAS AND LP GAS VERSIONS OF THESE COOKERS ARE DIFFERENT MODELS AND CANNOT BE CONVERTED FROM ONE GAS...
