Page 3 - Update firmware; Download the update file; Contents
1 EN Contents 1 Important 2 Safety 2 Notice 3 2 Your Entertainment System 5 Introduction 5 What's in the box 5 What else you need 5 Over view of the main unit 6 Get star ted to use AirPlay 6 3 Prepare 7 Connect power 7 Turn AD7000W on 7 4 Connect to your home Wi-Fi network for AirPlay 8 Scenario 1: ...
Page 4 - Important; Safety; To reduce the risk of fire or electric shock,; apparatus in a confined space. Always
2 EN 1 Important Safety Information for Europe:Know these safety symbols The 'exclamation mark' calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems.The 'lightening bolt' symbol indicates uninsulated components within t...
Page 5 - Mains fuse; Notice; Environmental information
3 EN Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved molded plug. If you replace the fuse, use one with:• the ratings shown on the plug,• a BS 1362 approval, and• the ASTA approval mark. Contact your dealer if you are not sure about ...
Page 7 - Introduction; What else you need
5 EN 2 Your Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model ...
Page 8 - In terms of AirPlay, AD7000W; Overview of the main unit; Power indicator; DC IN; Get started to use AirPlay; To get star ted with AirPlay, you need to:
6 EN List of compatible iTunes host devices for AirPlay In terms of AirPlay, AD7000W is compatible with: • a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later); and • the following iPod/iPhone/iPad models installed with iOS 4.3 (or later): • iPad 2 • iPad • iPhone 4 • iPhone 3GS • iPod touch (...
Page 9 - Prepare; Connect power
7 EN 3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug fro...
Page 10 - Once connected successfully, AD7000W; Scenario 1: Connect to a; Shor tly after step 1, press; WPS
8 EN 4 Connect to your home Wi- Fi network for AirPlay To connect AD7000W to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to AD7000W.You can do this in two ways (depending on which type of Wi-Fi router you use): • Automatically - if your Wi-Fi router is WPS (Wi-Fi Pro...
Page 11 - Scenario 2: Connect to a; built-in configuration web page for change of
9 EN Tip • For some Wi-Fi routers, you may need to hold the WPS button for Wi-Fi connection or enable the WPS PBC function from the router configuration pages. See the user manuals of the specific routers for details. • If the Wi-Fi SETUP indicator on AD7000W blinks yellow, it means that the Wi-Fi c...
Page 12 - Launch the Internet browser (for example,; Switch AD7000W to Assisted Wi-Fi; AD7000W will appear, with the
10 EN Collect settings of your home Wi-Fi router Note • Always consult the user manual of your home Wi-Fi router for detailed instructions. 1 Connect your Wi-Fi enabled device to your existing home Wi-Fi network. 2 Launch the Internet browser (for example, Apple Safari or Microsoft Internet Explorer...
Page 13 - Settings; Philips Fidelio AirPlay
11 EN Connect your Wi-Fi enabled device to the newly created Wi-Fi network The new Wi-Fi network created by AD7000W only allows access of one Wi- Fi enabled device. To avoid interference from any other Wi-Fi devices, you are recommended to temporarily disable the Wi-Fi function on your other Wi-Fi d...
Page 14 - Philips Fidelio AirPlay; Open the built-in web page of; Launch Apple
12 EN 2 Scan the available Wi-Fi networks. 3 Select Philips Fidelio AirPlay from the list of available networks. 4 Wait until successful Wi-Fi connection on your PC/Mac. Tip • If Philips Fidelio AirPlay is not in the list, tr y to scan the available Wi-Fi networks again. Open the built-in web page o...
Page 15 - Change the internal Wi-Fi settings of; On the AD7000W configuration web page,; change and confirm the internal Wi-Fi
13 EN 1 Click -> Preferences . » The Bookmarks menu is displayed. 2 Tick Include Bonjour for Bookmarks bar . 3 Select 'Philips_Fidelio XXX' from the Bonjour pull-down list shown at the bookmarks bar. » The AD7000W configuration web page is displayed. Change the internal Wi-Fi settings of AD7000W ...
Page 16 - Restore your Wi-Fi enabled device
14 EN Note • If the WI-FI SETUP indicator on AD7000W does not stay green steadily, it means that the Wi-Fi connection has failed. Please power off both your Wi-Fi router and AD7000W and then power on them again to see whether AD7000W can be connected to your home Wi-Fi network. If the problem remain...
Page 17 - iPad; Launch the
15 EN 5 Play Stream audio from your iTunes music library to AD7000W Note • Make sure that your iTunes host device is connected to the same Wi-Fi network as AD7000W. Your iTunes device can be an iPod touch/iPhone/iPad installed with iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 1...
Page 18 - Stream from your PC/Mac; Click the AirPlay icon on the window.
16 EN 4 Select a media file and star t play. » After a while, you will hear music from AD7000W. Note • If you fail to hear music after successful setup, do one of the following on your iPod touch/iPhone/iPad: • (1) Disconnect and then re-connect to the same Wi-Fi router again; • (2) Close all applic...
Page 19 - Control play; • To pause or resume play, press; Use advanced sound settings; If your iTunes host device is an; iPad through USB socket; If you have stopped audio streaming by AirPlay,
17 EN Tip • When you stream audio from your iTunes music librar y on a PC/Mac, you can select more than one AirPlay- enabled devices (if available) at step 3 to stream music to all of them at the same time. • If you are using an earlier version of iTunes, the AirPlay icon may be instead of . Control...
Page 20 - Play from an external device
18 EN • the USB socket on the back of AD7000W. • the dock connector on your iPod/iPhone/iPad. Compatible iPod/iPhone/iPad The USB socket suppor ts play and charge of the following iPod, iPhone, and iPad models.• iPad 2 • iPad • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPod classic • iPod 5G • iP...
Page 21 - Enter the model number to find the latest; Update from the; SETUP
19 EN 6 Update firmware Note • You can only update the firmware from a PC/Mac. Download the update file 1 On your PC/Mac, go to www.philips.com/ suppor t. 2 Enter the model number to find the latest firmware upgrade file available. 3 Save and unzip the upgrade file to your hard drive. www.philips.co...
Page 23 - Specifications; Amplifier; MP3 Link; Speakers
21 EN 7 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 X 5 W RMS Frequency Response 63 Hz - 18 kHz, ±3 dB Signal to Noise Ratio > 90 dB MP3 Link 600 mV RMS 20 kohm Speakers Speaker Impedance 8 ohm Speaker Dri...
Page 24 - Troubleshooting
22 EN 8 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains unsolved, go to the Ph...