Philips AC4076 Manual - Free PDF Download

Page 4 - EnGlIsh

4 Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. With this new home air purifier, you breathe cleaner air in your new or newly decorated home. For the best result, place t...

Page 5 - N Front panel; Important; Danger

M Filter 1: pre-filter N Front panel Important Read this user manual carefully before you use the appliance and save it for future reference. Danger - Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard. - Do not clean the appl...

Page 6 - Caution

Caution - This appliance is not a substitute for proper ventilation, regular vacuum cleaning or use of an extractor hood or fan while cooking. - If the wall socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure you plug the appliance into a properl...

Page 7 - regarding exposure to electromagnetic fields.; Before first use; the top part of the front panel towards you. Then lift the hooks at

- Always unplug the appliance after use and before you clean it. - Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance. - The appliance is only intended for household use under normal operating conditions. - Do not use the appliance ...

Page 9 - Colour

Using the appliance 1 Put the plug in the wall socket All lights go on twice and you hear a beep. Then the lights go out again. 2 Press the on/off button to switch on the appliance. The power-on light, the AUTO light, and the AIR QUALITY light on the control panel go on. The air quality light ...

Page 10 - Fan speed lights/filter replacement lights; - The lights on the right-hand side of the control panel have a dual; Adjusting the air quality sensor sensitivity; There are 3 sensitivity levels:

mode causes the appliance to run at high fan speed. You can solve this by cleaning the air quality sensor. If condensation develops frequently during periods of high humidity, we advise you to use one of the manual speed settings. Fan speed lights/filter replacement lights - The lights on the right-...

Page 11 - Auto mode; When the appliance is switched on, the built-in air quality sensor

3 Press the FAN SPEED button to adjust the sensitivity level of the air quality sensor. One of the fan speed lights flashes to show the set sensitivity level of the air quality sensor. 4 Press the on/off button to switch off the appliance. Note: When you change the sensitivity level, the appliance...

Page 12 - night mode; appliance automatically switches to night mode when the room in; Fan speed; If you do not use the auto mode, you can select the desired fan speed

night mode The appliance works in harmony with its surroundings. In auto mode, the appliance automatically switches to night mode when the room in which it is operating becomes dark. When the room has been dark for 3 minutes, the lights of the appliance go out, the fan speed and noise level are redu...

Page 13 - silent mode; When you use the appliance in silent mode, it operates ver y quietly.; Cleaning; collecting on the inside and outside.

silent mode When you use the appliance in silent mode, it operates ver y quietly. 1 Press the on/off button to switch on the appliance. 2 Press the SILENT button to activate the silent mode. The SILENT light goes on. If you want to go back to the FAN SPEED mode or AUTO mode, simply press the FAN S...

Page 14 - Air quality sensor; the air quality sensor or use one of the manual speed settings.

2 To remove the pre-filter, grab the two projections and pull the filter towards you. 3 Wash the pre-filter under a running tap. If the pre-filter is very dirty, use a soft brush to brush away the dust. Tip: Alternatively, you can clean the pre-filter by removing the dust with a vacuum cleaner. 4 Ai...

Page 15 - Filter replacement; concerned lights up on continuously.; Filter replacement lights; cleaned. See chapter ‘Cleaning’ for fur ther instructions.

3 Clean the air quality sensor, the dust inlet and the dust outlet with a lightly moistened cotton swab. 4 Dry them with a dry cotton swab. 5 Reattach the air quality sensor cover. Filter replacement Filter maintenance This appliance is equipped with the Healthy air protect lock to ensure that the f...

Page 16 - healthy air protect lock; new filter and pressed the reset button.; Replacing the filters

healthy air protect lock If you do not replace the filter in time, the appliance stops operating approx. 2 weeks after the filter replacement light star ted flashing.When the appliance is locked, it does not operate until you have replaced with the new filter and pressed the reset button. Note: When...

Page 17 - storage; bottom of the appliance.; Accessories; New filters are available under the following type numbers:

6 Put filter 2 (New home filter) back into the appliance. Note: Make sure that the side with the tag is pointing towards you. 7 Put filter 1 (pre-filter) back into the appliance. Note: Make sure that the side with the two projections is pointing towards you.Note: Make sure that all hooks are properl...

Page 18 - Problem

Environment - Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment. Guarantee and service If you need information or if you have a problem, please vis...