Philips AC3858/50 - Quick Guide

Philips AC3858/50

A user manual for the Philips Mars air purifier covers its smart connectivity features, allowing users to monitor and control the device via the Clean Home+ app. The guide highlights key operational aspects such as touchscreen controls, air quality indicators (including PM2.5 levels), filter maintenance–particularly the NanoProtect Series 3–and how display alerts signal when cleaning or replacement is needed. Safety and performance monitoring are also addressed through real-time feedback on particulate matter and allergen detection.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
Page: / 5

Table of Contents:

  • Page 1 – App Connectivity and Filter Maintenance Procedures
  • Page 2 – Connecting to App and Display Indicators
  • Page 3 – Touchscreen Operation and Air Quality Interpretation
  • Page 4 – Model Specific App Control and Filter Management
  • Page 5 – Clean Home+ App Integration and Filter Maintenance
Loading the manual
Page 1

Mars TFT_AC3854/AC3858 CEE_EN 90x127mm

Connectivity

You can use the app to control the purifier and check air quality. Download and install the Philips app

Clean Home+

Open the app and click on "Connect a New Device" or press

the "+" button to connect your device. Please follow the

steps in the app.

Control

Power Filter status/ reset Display switch Mode switch Light on/off

• PM2.5

• Gas

• IAI

• Auto

• Turbo

• Sleep

Display

Auto mode Turbo mode Sleep mode

Wi-Fi indicator Filter cleaning Filter replacement

alert alert

Gas indicator Indoor allergen PM2.5 Air quality

L1 02 009

index index indicator light

Gas index from L1-L4. L1 indicates best air quality

Allergen index 1-12. 1 indicates best air quality

Good Fair Poor Very poor

Maintenance

1

NanoProtect filter Series 3 (FY4440/30)

When display shows

• Time to clean the NanoProtect filter Series 3

When display shows

• Time to replace the NanoProtect

filter Series 3

! Press to check filter lifetime status.

! Press for 3 seconds to reset after cleaning or replacing filter.

The filter may produce smell after being used for a while because of the

absorption of indoor air. Remove the filter and place it where it has direct

sunlight and ventilation for several hours. Re-install and try using it again.

If the odor remains, please replace the filter.

3000 038 71833-1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
Philips
Model
AC3858/50
Document type
Quick Guide
Language(s)
English, Polish, Russian
Pages
5
File size
4.2 MB
Format
PDF

Other Manuals for Philips AC3858/50

Summary

Page 1 - App Connectivity and Filter Maintenance Procedures

Instructions for using the device application to control functions, view display indicators (air quality, filter status), and procedures for cleaning or replacing the NanoProtect filter.

Page 2 - Connecting to App and Display Indicators

Details on connecting the device to the Clean Home+ app, interpreting control buttons and display indicators for PM2.5, IAI, and air quality levels, along with instructions for NanoProtect filter maintenance.

Page 3 - Touchscreen Operation and Air Quality Interpretation

Instructions for operating the device via the touchscreen, controlling modes (automatic, turbo, sleep), interpreting display indicators for air quality (PM2.5, gas, allergens), and maintaining the NanoProtect filter.

Tips

  • Regular filter maintenance is crucial for optimal performance. If the filter develops an odor, place it in direct sunlight with good ventilation for several hours. If the smell persists, replace the filter.
  • Always reset the filter timer after cleaning or replacing the filter by holding the reset button for 3 seconds.
  • Use the Philips Clean Home+ app for remote control, mode selection, and real-time air quality monitoring.

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.