Pelco PSKIT8100 - Manual
Pelco PSKIT8100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – Important Safeguards and Warnings; Description
- Page 6 – Installation; ENCLOSURE DISASSEMBLY
- Page 7 – Pressure Sensor Installation
- Page 9 – Enclosure Reassembly and Recharging; REASSEMBLY; RECHARGING
®
PSKIT8100
Pressure Sensor Option
For EH8100 Series
Pressurized Camera Enclosure
C1445M-D (11/04)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C1445M-D (11/04) 5 Important Safeguards and Warnings 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- s...
6 C1445M-D (11/04) Installation ENCLOSURE DISASSEMBLY 1. Disconnect power to the enclosure. 2. Remove the ground wire from the ground stud on the back of the enclosure. 3. Remove the electrical connector from the rear of the enclosure by turning the outer ring counterclockwise and pulling the mating...
C1445M-D (11/04) 7 Pressure Sensor Installation To install the pressure sensor, perform the following steps. 1. Remove the screw located inside the top portion of the enclosure’s rear plate (refer to Figure 2). Insert the pressure sensor tube fitting in the hole. 2. Loosen the camera sled mounting s...
