Pelco C2444M-C - Manuals - manualsarea.com

Page 2 - Worldwide Headquarters; Label Position

Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150 International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120 Pelco and the Pelco logo are registered trademarks of Pelco. ©Copyright 2005, Pelco. All rights re...

Page 3 - O P E R AT I O N / P R O G R A M M I N G

Spectra III ™ SE Series C2443M-C (1/04) O P E R AT I O N / P R O G R A M M I N G ® Models DD53M22 & DD53M22-X

Page 5 - CONTENTS

2 C2443M-C (1/04) CONTENTS WELCOME ................................................................................................................................................................................................ 5 GETTING STARTED .........................................................

Page 8 - CONFIGURE DONE

C2443M-C (1/04) 5 WELCOME Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your newsystem features a high resolution, monochrome camera with programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of yoursyste...

Page 9 - HOW TO OPERATE YOUR DOME SYSTEM

6 C2443M-C (1/04) HOW TO OPERATE YOUR DOME SYSTEM Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit . 2. R...

Page 11 - PelcoNet; Click the preset 95 button. The main menu appears.

8 C2443M-C (1/04) KBD4000/KBD4002 (GENEX ® MULTIPLEXER) 1. Press the SPOT MONITOR key. 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menuappears on the screen. MPT9500 Standard Coaxitron Mode1. Enter 95 and press the PRESET SET key. 2. Position the asterisk in the...

Page 12 - QUICK START GUIDE – SYSTEM SETUP; Presets; Preset; Quick Programming Guide; Accessing Main Menu

C2443M-C (1/04) 9 QUICK START GUIDE – SYSTEM SETUP Presets The following presets are reserved for special functions. Preset Function 33 Flip command 90-91 Manual limit stops 92-93 Scan limit stops 95 Select main programming menu 96 Stop a scan 97 Random scanning 98 Frame scanning 99 Start auto scann...

Page 13 - LANGUAGE; To change the display language:

C2443M-C (1/04) 11 LANGUAGE The language for the on-screen menus is selectable. Available languages include English,Spanish, French, German, Italian, and Portuguese. The factory default language is English. To change the display language: 1. Use the joystick to position the cursor beside LANGUAGE. 2...

Page 14 - SYSTEM INFORMATION; Use the following steps to display the System Information screen:

12 C2443M-C (1/04) SYSTEM INFORMATION The system Information screen displays dome drive model, software version, available memory,and other diagnostic information. System settings cannot be changed using this screen. This screen is for reference only. Use the following steps to display the System In...

Page 15 - DISPLAY SETUP

C2443M-C (1/04) 13 DISPLAY SETUP Display setup allows you to program how labels are displayed on the monitor. The followinglabels are available: PRESET LABEL - Identifies preset. ZONE LABEL - Identifies zone. ZOOM RATIO - Identifies the amount of magnification. AZIMUTH 1 /ELEVATION 2 - Amount of pan...

Page 17 - DOME SETTINGS; TYPE OF LIGHTING; INDOOR; AUTO FOCUS; There are two auto focus settings:

C2443M-C (1/04) 15 BACKEXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X176 ZOOM SPEED MEDIUM LOW LIGHT LIMIT 2 <ADVANCED SETTINGS> CAMERA BACKEXIT <CAMERA><MOTION><POWER UP><LINE SYNC><PRESETS><PATTERNS><ZONES><WINDOW BLANKING><ALARMS&...

Page 18 - Settings include the following:

16 C2443M-C (1/04) ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The defaultsetting is 176X. Cameras with 264X zoom (22X optical zoom and 12X electronic zoom) can be set for 22X, 32X,88X, 176X, 220X, or 264X. ZOOM SPEED Zoom Speed allows the user to de...

Page 19 - SHUTTER SPEED; sensed by the camera.; AGC LIMIT

C2443M-C (1/04) 17 BACKEXIT ADVANCED SETTINGS SHUTTER SPEED AUTO AGC LIMIT 27 AUTO IRIS AUTO AUTO IRIS LEVEL 66 AUTO IRIS PEAK 8 AUTO SHARPNESS ON SHARPNESS LEVEL 26 BACKLIGHT COMP OFF VIDEO LEVEL HIGH BACKEXIT TYPE OF LIGHTING OUTDOOR AUTO FOCUS ON ZOOM LIMIT X176 ZOOM SPEED MEDIUM LOW LIGHT LIMIT ...

Page 20 - AUTO IRIS; determined by the Auto Iris Level setting.; Auto Iris Level

18 C2443M-C (1/04) AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changinglight conditions. Program the auto iris to operate automatically or at a user-defined level. OFF - Auto iris is disabled, and control is always manual. AUTO (default) - The...

Page 21 - AUTO SHARPNESS; There are two settings:

C2443M-C (1/04) 19 AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera andsharpening the edges in the picture. There are two settings: ON (default) - The camera automatically maintains a normal sharpness mode. OFF - The sharpness of the picture is set ...

Page 22 - VIDEO LEVEL; Set the video output to one of the following:

20 C2443M-C (1/04) BACKLIGHT COMPENSATION (BLC) If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.Backlight compensation enhances objects in the center of the picture. The dome uses the centerof the picture to adjust the iris. If there is a bright light...

Page 23 - AUTO FLIP; There are two auto flip modes:; PROPORTIONAL PAN; There are two proportional pan modes:

C2443M-C (1/04) 21 <Motion Settings> AUTO FLIP When the camera tilts downward and goes just beyond the vertical position, the dome rotates180 degrees. When the dome rotates (flips), the camera starts moving upward as long as youcontinue to hold the joystick in the down position. Once you let g...

Page 24 - PARK TIME; Park Action; AUTO SCAN - Dome starts auto scan operation.

22 C2443M-C (1/04) PARK TIME This feature allows the dome to begin a specified operation (scan, preset, or pattern) after aprogrammed time of inactivity. Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, whichdisables this feature. The default setting is zero. Park...

Page 25 - and guarantees that blanked areas will not

C2443M-C (1/04) 23 SCAN SPEED Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speedis adjustable from 1 to 40 degrees per second through the programming menu. The defaultsetting is 25 degrees per second. PRESET FREEZE FRAME This feature freezes the scene on the ...

Page 26 - LIMIT STOPS; There are two types of limit stops:; NOTE; To clear manual or scan stops:

24 C2443M-C (1/04) LIMIT STOPS Limit stops are programmable stops that limit the pan range of the dome. There must be twolimits, a left and a right, to define an area. There are two types of limit stops: MANUAL - A manual (joystick) pan operation stops when a limit stop is reached. SCAN - The dome r...

Page 27 - AZIMUTH ZERO

C2443M-C (1/04) 25 AZIMUTH ZERO Azimuth is the pan angle from 0 ° to 359 ° . Azimuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point. To program azimuth zero: 1. U...

Page 28 - POWER UP ACTION; The following settings are available:

26 C2443M-C (1/04) <Power Up> POWER UP ACTION This setting defines a specific activity (scan, preset, pattern) to be performed in the event thepower to the dome is cycled. The following settings are available: NONE - No action. AUTO (default) - The dome resumes its prior activity or direction ...

Page 35 - Increase the

C2443M-C (1/04) 33 Window Blanking Disabled Window Blanking Enabled IMPORTANT: Increase the size of the window if any partof the blanked area isrevealed during pan, tilt, andzoom operations. (See page 9) Quick Programming Guide 6. The blanked area can be programmed to turn on or off at a specified z...

Page 36 - Blank All Above; Blank All Below

34 C2443M-C (1/04) REVERSE A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below theblanking area remain visible. Reversing the window a second time will return it to its original condition. CLEAR WINDOW All areas that have bee...

Page 41 - REPEAT

C2443M-C (1/04) 39 (See page 9) Quick Programming Guide <Alert> NOTE: The Alert section only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher. Spectra III SE systems that are not pressurized or pressurized systemsthat do not have dome drive software versi...

Page 44 - At least one character must be entered to create a valid password.

42 C2443M-C (1/04) <Password> Spectra III SE features password protection to prevent unauthorized changes to the domesettings. An operator can open the System Information and Display Setup Screens, but cannotaccess any of the Dome Settings menus. Controller/keyboard commands cannot override pa...

Page 46 - SOFTWARE/LANGUAGE FILE UPLOAD; performed if the dome system is operating properly.; UPLOAD ICON; Upload Icon

44 C2443M-C (1/04) SOFTWARE/LANGUAGE FILE UPLOAD The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading ofrevised operating software and language files. A Pelco field service tool is required to performthese operations. Field service tools include Pelco’s remot...

Page 47 - SPECIFICATIONS

C2443M-C (1/04) 45 SPECIFICATIONS DD53M22 Signal Format NTSC Scanning System 2:1 Interlace Image Sensor 1/4-inch CCD Effective pixels 768 (H) X 494 (V) Horizontal Resolution >500 TV lines Lens F1.6 (f=4~88 mm optical, 22X optical zoom, 12X electronic zoom) Zoom Speed 3.9 seconds Horizontal Angle ...

Page 48 - REVISION HISTORY; REGULATORY NOTICES; Reorient or relocate the receiving antenna.

46 C2443M-C (1/04) ® Pelco, the Pelco logo, and Genex are registered trademarks of Pelco. © Copyright 2004, Pelco. ™ Spectra III, PelcoNet, and LowLight are trademarks of Pelco. All rights reserved. REVISION HISTORY Manual # Date Comments C2443M 2/02 Original version. C2443M-A 11/02 Revised Quick St...