Pelco C2951M-C - Manual
Pelco C2951M-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Product Overview
- Page 4 – Installation; Pin
- Page 6 – Operation; IP ADDRESS SETTINGS
- Page 7 – MINIMUM SYSTEM REQUIREMENTS; IX SERIES; IXE SERIES; Network Interface Card:; LOGGING ON TO THE CAMERA; admin
- Page 8 – Maximize Viewing Area:
- Page 10 – Audio Configuration:; USERS AND GROUPS TAB; Analytic Configuration:
- Page 11 – PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY; RETURNS
Q U I C K S T A R T
C2951M-C (12/09)
IX and IXE Series
Network Camera
Sarix
™
Technology
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C2951M-C (12/09) 2 Product Overview Figure 1. Camera Connections and Features PoE A C T LINK A CC RESET 24V ~ RELAY R1 ALARM A1 (FRONT C OVER OPENED) F V
C2951M-C (12/09) 4 Installation NOTES: • For detailed instructions, refer to the IX Series Installation/Operation manual or the IXE Series Installation/Operation manual. Both are available on the resource disc. • Megapixel lenses are designed and tested to deliver optimal image quality to the IX Ser...
C2951M-C (12/09) 6 Operation Once the camera is installed, apply power to the camera. The camera will start a configuration sequence. The green LED flashes five times per second for approximately two minutes and then turns solid after the boot cycle is complete and the camera is on line. IP ADDRESS ...
