Pelco C1977M-D - Manuals

[ 6 ] Pelco Manual C1977M-D (6/02) IMPORTANT SAFEGUARDS AND WARNINGS Observe the following warnings before installing and using this product. 1. Installation and servicing should be done by qualified service personnel only and conform to all local codes. 2. Unless the unit is specifically marked as ...

Pelco Manual C1977M-D (6/02) [ 7 ] INSTRUCTIONS FOR THE NETWORK ADMINISTRATOR The PelcoNet™ Transmission System allows live video transmission to be viewed over TCP/IP-basednetworks. This section is intended to help the network administrator know what is involved with installingthis product and how ...

[ 8 ] Pelco Manual C1977M-D (6/02) WHAT IS THE PELCONET TRANSMISSION SYSTEM? The PelcoNet Transmission System is a new technology that lets you view video in real time across a LocalArea Network (LAN) and even Wide Area Networks (WAN). This technology is based on the TCP/IP protocolsuite and Etherne...

Pelco Manual C1977M-D (6/02) [ 9 ] OVERVIEW NOTE: This manual refers to the PelcoNet Transmission System unit when discussing features, functions, or specifications that apply to both transmitter and receiver models. “Receiver,” as used in this manual refersto a PelcoNet Transmission System receiver...

[ 10 ] Pelco Manual C1977M-D (6/02) Front Panel Connectors The PelcoNet Transmission System uses a compact design. One reason for the compact design is thatconnectors are placed on both the front and rear panels. The front panel connectors are dedicated to themedia interfaces (video, audio, and data...

Pelco Manual C1977M-D (6/02) [ 11 ] Rear Panel Connectors The network interface, a terminal port for configuration and management, an alarm I/O-port, and thepower connector reside on the unit’s rear panel (see Figure 2). 1 2 5 6 3 4 Key:1 = Ethernet port for connecting the PelcoNet Transmission Syst...

[ 12 ] Pelco Manual C1977M-D (6/02) QUICK INSTALLATION GUIDE Follow the next seven steps for the fastest way to get your product up and running. Step 1: Connecting A Camera Or Monitor 3 1 4 2 Key:1 = Camera or other video source with composite PAL or NTSC output2 = Video monitor with composite PAL o...

Pelco Manual C1977M-D (6/02) [ 13 ] Step 3: Connecting To The LAN Port 1 2 3 1 2 3 4 Key:1 = Ethernet (10BASE-T) LAN connection to hubs, network, PCs (RJ-45 connector)2 = Ethernet Cat5 cable3 = Transmitter or receiver Figure 4. Connecting To The LAN Port To connect to the Ethernet network, use a sta...

[ 14 ] Pelco Manual C1977M-D (6/02) Step 5: Selecting An IP Address For Your Network NOTE : Consult your network administrator for a valid IP address. The transmitter comes with the default address 192.168.0.1 while the receiver’s default address is192.168.0.2. Before operating the system inside you...

Pelco Manual C1977M-D (6/02) [ 15 ] Figure 6. PelcoNet Home Page

[ 16 ] Pelco Manual C1977M-D (6/02) Displaying Video Via a Transmitter-To-Receiver Connection TCP/IP INTRANET/INTERNET RECEIVER TRANSMITTER MONITOR CAMERA LAN/WAN Figure 7. Configuration For Box-To-Box Connections There are two ways to make a high performance multimedia transmission system for compu...

Pelco Manual C1977M-D (6/02) [ 17 ] Diagrams of Typical Applications Figure 8. LAN Box-To-Box Connection (Transmitter, Receiver, Fixed Camera) Camera Monitor PelcoNet Transmitter PelcoNet Receiver Hub Data Audio Data Audio Server PelcoNet Transmitter PelcoNet Receiver Hub Audio Spectra II Audio Moni...

Pelco Manual C1977M-D (6/02) [ 23 ] HARDWARE INSTALLATION Refer to Appendix A - Connecting PelcoNet to Different Components for diagrams that show various connections. Connecting Video Sources Or Displays • To connect a camera, plug a standard coaxial cable into the BNC connector at the front of the...

[ 24 ] Pelco Manual C1977M-D (6/02) Connecting Data Terminals The unit has two serial interfaces—one at the back and another at the front. They serve different purposesand cannot be used interchangeably, as explained in the following. Control Terminal Port For local control and configuration of the ...

Pelco Manual C1977M-D (6/02) [ 25 ] Transparent Data Port The second serial interface, on the unit’s front panel, offers a transparent serial data channel between thereceiver and the transmitter. A typical application for the transparent data channel is remote control ofperipheral equipment (PTZ fun...

[ 26 ] Pelco Manual C1977M-D (6/02) Connecting External Sensors and Controlling Peripheral Devices The unit has an alarm input to use for external signaling devices, like door contacts or motion detectors.You can connect switches or contacts directly without a separate power supply. The alarm input ...

Pelco Manual C1977M-D (6/02) [ 27 ] CONFIGURATION There are two ways to configure your system: • The most basic control and configuration is accomplished by connecting a terminal to the RS-232terminal port. • A more complete configuration and display of video is through the built-in HTTP server, whi...

[ 28 ] Pelco Manual C1977M-D (6/02) Command Reference The following table gives an overview of all available commands. (Enter the appropriate informationwhere indicated by the quotation marks below. Do not enter the quotation marks.) Table A. Terminal Command Reference Cmd Description ? Displays the...

Pelco Manual C1977M-D (6/02) [ 29 ] Table A. Terminal Command Reference (continued) v Display version information. >HW version: <version number> SW version: <version number> b Displays the current transmission data rate. The display is updated continuously. Configuration Using A Web B...

[ 30 ] Pelco Manual C1977M-D (6/02) Figure 23. PelcoNet Menu Tree GENERAL VIDEO Video quality Video resolution Bandwidth ActiveX Camera name Name stamping Time stamping Input source Output standard Enable JPEG images Time slice FTP server IP address Login name Password Path AUDIO Audio interface Inp...

Pelco Manual C1977M-D (6/02) [ 31 ] PelcoNet Home Page Figure 24. PelcoNet Home Page The home page is the starting point for any configuration. The window in the center of the screen is the display area for decoded video. See the Typical Applications section for a description of how to display video...

[ 32 ] Pelco Manual C1977M-D (6/02) Figure 25. PelcoNet Transmission System Setup Page NOTE: When changing any configuration item in one of the following pages, make sure to change a single item at a time. Then click the respective Set button. If more than one item needs to be changed,execute the pr...

Pelco Manual C1977M-D (6/02) [ 33 ] General Settings Configuration Page The unit ID name and address, as well as network and routing information, comprise the General Set-tings Configuration Page. All units have a real-time clock set during manufacture. However, time and date can be changed anytime;...

[ 34 ] Pelco Manual C1977M-D (6/02) The following table gives detailed information about the items on the General Settings ConfigurationPage, together with the default factory settings: Table B. General Settings Configuration Default Item Settings Description Name none The unit name helps the user i...

[ 36 ] Pelco Manual C1977M-D (6/02) Figure 27. Screen For Entering The Password

Pelco Manual C1977M-D (6/02) [ 37 ] Video Settings Configuration Page The Video Settings Configuration Page lets you modify all video-related parameters. Some items applyonly to transmitters while others require a receiver. The screen capture below belongs to a receiver: thesetting for the video ban...

[ 38 ] Pelco Manual C1977M-D (6/02) The following table details the configuration items. The Type column shows whether the particular settingapplies to transmitters (T) or receivers (R), or both (B). Table C. Video Settings Configuration Default Type Description Item Settings Video quality super fas...

[ 40 ] Pelco Manual C1977M-D (6/02) Audio Settings Configuration Page Audio configuration settings apply only to transmitters and receivers equipped with the audio option(NET101T-A and NET101R-A). Figure 29. Audio Settings Configuration Menu

[ 42 ] Pelco Manual C1977M-D (6/02) Alarm Settings Configuration Page The PelcoNet Transmission System is not only a multimedia gateway but also a security device and,therefore, has many features related to security applications. The Alarm Settings Configuration Page letsyou configure your unit for ...

[ 46 ] Pelco Manual C1977M-D (6/02) Interface Settings Configuration Page You can use the Interface Settings Configuration Page to configure the parameters of the RS-232 trans-parent data port on the front panel. The parameters of the terminal port are configured at 9600 baud, 8data bits, no parity,...

Pelco Manual C1977M-D (6/02) [ 47 ] The default parameters of the transparent data port agree with the most commonly used settings, asshown in the following table. Table F. Interface Settings Configuration Default Description Item Settings Transparent Data Port Baudrate 9600 Select any transmission ...

[ 48 ] Pelco Manual C1977M-D (6/02) LIVE VIDEO AND SERVER PUSH VIDEO PAGES The Live Video page shows a real-time picture of the camera view with update rates and image quality simi-lar to a box-to-box configuration. It can be configured for bandwidth use and for various image quality set-tings. The ...

Pelco Manual C1977M-D (6/02) [ 49 ] Figure 32. ActiveX Dialog Box

[ 50 ] Pelco Manual C1977M-D (6/02) Figure 33. Color Setting Dialog Box

Pelco Manual C1977M-D (6/02) [ 51 ] WEB BROWSER CONTROL PAGES Accessing These Pages 1. To access the PelcoNet Transmission System home page, you must first connect to the Internet/intranet network and open Internet Explorer (the browser). 2. Then, enter the default address 192.168.0.1 in the address...

[ 52 ] Pelco Manual C1977M-D (6/02) Controlling The Display The live video control pages include representations of keys that let you control various functions (inaddition to showing the camera display). Use the mouse pointer and click the left mouse button to enableoptions and operate controls on t...

Pelco Manual C1977M-D (6/02) [ 53 ] Figure 35. Matrix Control Page The Matrix Control pages contain the following:• Ten numbered buttons • CLR (clear) button • CAM (camera) button • MON (monitor) button • PRST (preset) button • PATT (pattern) button • MAC (macro) button • STOP button • BWD (backward...

[ 54 ] Pelco Manual C1977M-D (6/02) Genex Live Video/Server Push Page Contents Figure 36. Genex Control Page The Genex pages contain the following acrossthe top of the page: • Main and spot monitor selection radio buttons • A Live/VCR button • A Sequence button • A View button • A zoom out button • ...

Pelco Manual C1977M-D (6/02) [ 55 ] Spectra Live Video/Server Push Page Contents Figure 37. Spectra Control Page The Spectra pages contain the following arrayeddown the right side under “Lens”: • Iris open and close buttons • Focus far and near buttons • Zoom out and zoom in buttons The following ar...

[ 56 ] Pelco Manual C1977M-D (6/02) Esprit Live Video/Server Push Page Contents Figure 38. Esprit Control Page The Esprit pages contain the following arrayeddown the right side under “Lens”: • Iris open and close buttons • Focus far and near buttons • Zoom out and zoom in buttons The following are a...

Pelco Manual C1977M-D (6/02) [ 57 ] DX3016 Live Video/Server Push Control Page Contents Figure 39. DX3016 Control Page NOTE: The DX3016 control pages apply to both the DX3009 and DX3016. The DX3016 pages contain the following arrayed across the top: • “Split” buttons (16-grid, 9-grid, A, B) let you ...

Pelco Manual C1977M-D (6/02) [ 59 ] ADVANCED FEATURES Automatic Connection Feature The advantage of conventional dedicated cabling lies in guaranteed performance and availability. ThePelcoNet Transmission System’s auto-connect feature is designed to provide the same level of guaran-teed connectivity...

[ 62 ] Pelco Manual C1977M-D (6/02) TROUBLESHOOTING If the following instructions fail to solve your problem, contact Pelco Technical Support at 1-800-289-9100for help. You should have the serial number from the bottom of the unit and the firmware version ready incase they are needed. Do not try to ...

Pelco Manual C1977M-D (6/02) [ 63 ] Transmit LED The orange LED next to the Ethernet 10BASE-T connector should flash briefly whenever a unit transmitsa packet (for example, when accessing the unit with a web browser). If this LED fails to come on, performthe following checks: • Are all units connect...

[ 64 ] Pelco Manual C1977M-D (6/02) Troubleshooting Connection Problems If you fail to connect to a system from a hardware receiver, check the following to pinpoint the problem: • Do not connect two units of the same type (for example, receiver to receiver). • Make sure network connectivity is avail...

Pelco Manual C1977M-D (6/02) [ 65 ] Test Between Audio-Equipped Transmitter and PC 1. Connect a microphone (via a preamplifier) to the Line-In cinch plug or connect a handset to the RJ-11 plug on the unit. 2. Make sure the correct menu items are set in the Audio Configuration Page—that is, select th...

[ 66 ] Pelco Manual C1977M-D (6/02) SPECIFICATIONS NETWORK PROTOCOL AND STANDARDS COMPATIBILITY Internet: IP, TCP, UDP, ICMP, ARP Configuration: HTTP, FTP Transmission Standards: H.323 (plus H.225, H.263, G.722, G.723, G.728, G.729) Video Coding: H.261, M-JPEG (M-JPEG in Server Push mode only) Video...

Pelco Manual C1977M-D (6/02) [ 67 ] POWER ADAPTER Type: Plug power adapter Input Voltage: 100-240 VAC, 50/60 Hz Output Voltage: 5 VDC, 2A Country Specific Adapters: US (default), Australia, Europe, UK NOTE: The physical adapter for the wall outlet is interchangeable for use in different countries. T...

[ 68 ] Pelco Manual C1977M-D (6/02) GLOSSARY 10BASE-T IEEE 802.3 specification for 10 Mbs Ethernet ARP Address Resolution Protocol b/s Bits per second, the actual data rate Cat5 Cable Type of cable used on a LAN to connect computers, printers, and transmittersand receivers to a hub on the network CI...

[ 70 ] Pelco Manual C1977M-D (6/02) APPENDIX A – CONNECTING PELCONET TO VARIOUSCOMPONENTS Connecting Pelconet To Various Components With AssortedKeyboards Connection Scenario 1 Refer to Figure 40 and the instructions that follow. Figure 40. KBD300 (Direct Mode) Connected to a Receiver or Spectra Dom...

[ 72 ] Pelco Manual C1977M-D (6/02) Connection Scenario 2 Refer to Figure 41 and the instructions that follow. Figure 41. KBD4000 Connected to a Multiplexer

[ 74 ] Pelco Manual C1977M-D (6/02) Connection Scenario 3 Refer to Figure 42 and the instructions that follow. Figure 42. CM9760KBD Connected to a CM9760-CC1 Controller

Pelco Manual C1977M-D (6/02) [ 77 ] Connecting a PelcoNet Receiver To a System CM9502 Refer to Figure 44. This configuration lets an operator view and control cameras with a CM9505 keyboard. Figure 44. Using PelcoNet with CM9505 to Provide Remote Control 9

[ 78 ] Pelco Manual C1977M-D (6/02) Connecting PelcoNet To a CM9502 ASCII Serial Port Refer to Figure 45. This configuration lets an operator view and control cameras from a PC using a webbrowser. (The operator’s PC is not shown on the diagram.) Figure 45. Using PelcoNet with CM9502 to Provide Remot...

Pelco Manual C1977M-D (6/02) [ 79 ] Connecting a PelcoNet Receiver To a System CM8500D Refer to Figure 46. This configuration lets an operator view and control cameras with a CM8505D keyboard. Figure 46. Using PelcoNet with CM8505D to Provide Remote Control Connecting PelcoNet To a CM6700 And KBD200...

[ 80 ] Pelco Manual C1977M-D (6/02) Connecting PelcoNet To a CM6700 ASCII Port Refer to Figure 47. This configuration lets an operator view and control cameras from a PC using a webbrowser. (The operator’s PC is not shown on the diagram.) Figure 47. Using PelcoNet with CM6700 to Provide Remote Contr...

[ 84 ] Pelco Manual C1977M-D (6/02) Connecting Pelconet To DX3000 For Recording Refer to Figure 50. This configuration lets an operator remotely view, record, and playback video on aDX3000 digital video recorder. • Set the control terminal port to COM2 and 1200, 8, NONE, 1. • Connect the monitor out...

Pelco Manual C1977M-D (6/02) [ 85 ] Connecting a Pelconet Transmitter To The CM6800 ASCII Port Refer to Figure 51. This configuration lets an operator view and control cameras with a PC using a webbrowser. (The operator’s PC is not shown on the diagram.) All settings are done in the CM6800 managerpr...

[ 86 ] Pelco Manual C1977M-D (6/02) Figure 52. Manager Screen SET SERIAL PORT 07 DEVICE: ASCII TYPE: RS232 BAUD RATE: 9600 PARITY: ODD DATA BITS: 8 STOP BITS: 1 RETURN Figure 53. Menu Screen

[ 88 ] Pelco Manual C1977M-D (6/02) APPENDIX B – FREQUENTLY ASKED QUESTIONS (FAQS) 1. What Pelco devices can I control from my computer with PelcoNet? PelcoNet can control the following from Internet Explorer:• Spectra and Esprit • Genex multiplexer • DX3009 and DX3016 digital video recorders • CM97...

[ 90 ] Pelco Manual C1977M-D (6/02) INDEX Symbols 10BASE-T 13, 26, 62, 63, 66, 68 A ActiveX 48, 52Alarm connect 44Alarm input normally open/closed 43Alarm input pin 43Alarm IP address 44, 59Alarm IP set command 27Alarm message string 44Alarm settings configuration page 42Alarm status 44Audio coding ...

Pelco Manual C1977M-D (6/02) [ 91 ] M Mail reply address 35Mail server IP address 34Matrix Control live video/server push page content 53 Menu tree 29Microsoft Internet Explorer 29Monostable 45Motion alarm 43Motion detection 59Motion detection sensitivity 59Motion-JPEG 14 N Name of the unit 34Networ...

[ 92 ] Pelco Manual C1977M-D (6/02) REVISION HISTORY Manual # Date Comments C1977M 5/00 Original version. C1977M-A 5/01 Revised the General, Video, Audio, Alarm, and Interface Settings Configuration pages andtheir documentation. Revised the System 9760, Genex, and Spectra Control pages andtheir docu...