Pelco PMCL-V200 - Manual
Pelco PMCL-V200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C2228M-C (7/07)
PMCL-V200
Monitor Mount Adapter
C2228M-C (7/07)
1
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Installation should be done only by qualified personnel and conform to all local codes.
6. Use only installation methods and materials capable of supporting four times the maximum specified load.
7. Only use replacement parts recommended by Pelco.
8. This unit is designed for indoor use only, and it must not be installed where exposed to rain or moisture.
Description
The PMCL-V200 monitor mount adapter allows an LCD monitor mount to be used with larger LCD monitors, such as Pelco’s 500 Series monitors.
This adapter accommodates monitors with 200 x 200 mm and 200 x 100 mm hole patterns. The PMCL-V200 monitor mount adapter can be used with the
following Pelco mounts:
PMCL-WM
Wall mount
PMCL-WMT
Tilt-swivel wall mount
PMCL-WM1A
Single-arm wall mount
PMCL-WM2A
Double-arm wall mount
PMCL-CM
Ceiling mount
PMCL-CMP
Ceiling mount and telescoping pole
Installation
The following parts are supplied:
Qty
Description
1
Adapter plate
4
10-32 x 3/4-inch flat head Phillips screws, stainless steel
4
#10 split lock washers
4
10-32 hex nuts, stainless steel
4
M6 x 12 mm pan head Phillips screws, stainless steel
4
#8 split lock washers
4
M4 x 10 mm pan head Phillips screws, stainless steel
4
Flat washers
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
