Pelco PSKIT8100 - Manuals

C1445M-D (11/04) 5 Important Safeguards and Warnings 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- s...

6 C1445M-D (11/04) Installation ENCLOSURE DISASSEMBLY 1. Disconnect power to the enclosure. 2. Remove the ground wire from the ground stud on the back of the enclosure. 3. Remove the electrical connector from the rear of the enclosure by turning the outer ring counterclockwise and pulling the mating...

C1445M-D (11/04) 7 Pressure Sensor Installation To install the pressure sensor, perform the following steps. 1. Remove the screw located inside the top portion of the enclosure’s rear plate (refer to Figure 2). Insert the pressure sensor tube fitting in the hole. 2. Loosen the camera sled mounting s...