Pelco DX8000-UPDVD - Manual
Pelco DX8000-UPDVD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Protecting people and property in a million locations worldwide.
- Page 3 – Introduction; PARTS LIST; TOOLS NEEDED
- Page 4 – Getting Ready
- Page 7 – Prepare Unit for Drive Installation; OPEN THE UNIT CHASSIS
- Page 10 – COMPONENT LAYOUT
- Page 11 – Remove the Existing Optical Drive; DISCONNECT THE CD/DVD DATA CABLE AND POWER WIRES
- Page 13 – REMOVE THE CD/DVD DRIVE
- Page 15 – Install the New DVD-RW Drive into the Unit
- Page 17 – RECONNECT THE DATA CABLE AND POWER WIRES
- Page 19 – Reassemble the Unit
- Page 22 – Notes
DX8000-UPDVD Upgrade
Installation Manual
C1604M (6/04)
Digital Video Recorder
DX8000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Protecting people and property in a million locations worldwide.
C1604M (6/04) 1 Introduction The following instructions serve as an installation guide for the DX8000-UPDVD drive kit. PARTS LIST NOTE: This upgrade kit includes a Pelco-certified DVD-RW drive. Using any other drive voids the manufacturer’s warranty for the DX8000. Qty Description 1 DVD-RW drive 2 M...
2 C1604M (6/04) Getting Ready 1. Familiarize yourself with the instructions throughout this manual. 2. Check that you have all the necessary parts and tools. Refer to the Parts List and Tools Needed section. 3. Shut down the DX8000 Series DVR unit. Refer to DX8000 Installation Manual or Operations a...
