Pelco CCC5100H - Manual

Pelco CCC5100H

Pelco CCC5100H – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – DOCUMENT; Refer to the enclosed CD for the following documentation:; MODELS; color filter array; UTO I; DC-Drive Auto Iris Lens Setup
  • Page 3 – DW; Refer to Figure 1 as you install the CCC5100H Series camera.
  • Page 4 – LENS; To mount the lens onto the camera:; MOUNT
  • Page 5 – CONNECTIONS; Multifunction Connector; LOW VOLT; Connect a video cable to the BNC connector on the back of the camera.; VIDEO FO; press and hold the top and center buttons to select NTSC, or
  • Page 6 – SETUP MENUS
  • Page 8 – CCESSING THE SETUP MENUS; Table; Rear Panel Buttons and Actions; ME; MENU
  • Page 9 – WD
  • Page 11 – Remove the lens from the camera.
  • Page 12 – Open Iris and Closed Iris
  • Page 13 – LENS FOCUS; Focus the camera lens.
  • Page 14 – Fixed focal length lens only:
Loading the manual

QUICK START GUIDE

C2910M-B-

Q

S (2/06)

CCC5100H Series Camera

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - DOCUMENT; Refer to the enclosed CD for the following documentation:; MODELS; color filter array; UTO I; DC-Drive Auto Iris Lens Setup

2 C2910M-B-QS (2/06) This quick start guide describes how to install and configure the CCC5100H Series camera in most applications. It contains a representation of the setup menus to help you locate and change specific settings. BEFO R E YOU BEGIN DOCUMENT A TION Refer to the enclosed CD for the fol...

Page 3 - DW; Refer to Figure 1 as you install the CCC5100H Series camera.

C2910M-B-QS (2/06) 3 H AR DW AR E Refer to Figure 1 as you install the CCC5100H Series camera. Figure 1. CCC5100H Connectors VIDEOCONNECTOR SERVICECONNECTOR SETUPBUTTONS MULTIFUNCTION(RJ45-10) CONNECTOR POWERCONNECTOR BACK FOCUSADJUSTMENT C/CS LENS AUTO IRISLENS CABLEAND CONNECTOR(OPTIONAL)

Page 4 - LENS; To mount the lens onto the camera:; MOUNT

4 C2910M-B-QS (2/06) LENS The CCC5100H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. The camera accepts both CS- and C-mount lenses without an adapter. To mount the lens onto the camera: 1. Use clean, compressed air to remove any dust or ot...

Other Pelco Models

All Pelco Other