Pelco CCC4000 - Manual
Pelco CCC4000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS; LIST OF TABLES
- Page 3 – IMPORTANT SAFEGUARDS AND WARNINGS; The product may bear the following marks:; DESCRIPTION; Electronic/Passive Iris Control; MODELS; NTSC format camera
- Page 4 – LOCATION OF PARTS AND CONTROLS; LOCKING RING; FRONT VIEW
- Page 5 – INSTALLATION; CAMERA MOUNTING; Figure 2. Camera Mounting Screw; Be
- Page 6 – POWER REQUIREMENTS; Model; POWER AND VIDEO CONNECTIONS; Table A. Video Coaxial Cable Requirements; Maximum Distance
- Page 7 – Important Lens Notes:; LENS
- Page 8 – LENS MOUNTING; Remove the black protection cover from the CS-mounting ring.; BACK-FOCUS ADJUSTMENT; Fixed Focal Length Lenses; The iris cable of a
- Page 9 – Motorized Zoom Lenses; Using the camera controller, set the lens in the following manner:; CAMERA SYNCHRONIZATION AND V-PHASE; NTSC Standard
- Page 11 – SPECIFICATIONS; Pixels
- Page 12 – REVISION HISTORY; REGULATORY NOTICES; PRODUCT WARRANTY AND RETURN INFORMATION
CCC4000 Series
CCD Color Camera
Installation/
Operation Manual
C1925M (3/99)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Pelco Manual C1925M (3/99) CONTENTS Section Page IMPORTANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ................................................................................................................... 3 MODELS ..............
Pelco Manual C1925M (3/99) 3 IMPORTANT SAFEGUARDS AND WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by qualified service and installationpersonnel. 2. Installation shall be done in accordance with ...
4 Pelco Manual C1925M (3/99) LOCATION OF PARTS AND CONTROLS Figure 1. Location of Parts and Controls (Front and Rear) BACK-FOCUS LOCKING RING CS-MOUNT RING 1/3-INCH CCD ELEMENT IRIS CONNECTOR POWER CONNECTOR CAMERA MOUNT (1/4-20 UNC) VIDEO OUTPUT (BNC) V-PHASE ADJUSTMENT 4 2 3 1 PIN 1 = CONTROL COIL...
