Pelco C3422M-B - Manual
Pelco C3422M-B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Preinstallation
- Page 5 – Dome Drive
- Page 7 – Site Installation
- Page 12 – Switch Settings; Special Systems
- Page 17 – Specifications; GENERAL
- Page 19 – PRODUCT WARRANTY AND RETURN INFORMATION
I N S T A L L A T I O N
C3422M-B (3/08)
Pressurized
Spectra
®
IV Series
Pendant Back Box
with Fiber Optic Option
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 C3422M-B (3/08) Preinstallation NOTE: This manual is designed to be a reference tool for the installation of your system. For best results and ease of installation, the dome system should be assembled, pressurized, and tested before installation. A Pressurized Spectra ® IV cable harness (supplied ...
C3422M-B (3/08) 5 7. Install the lower dome: a. Position the lower dome so that the blower duct inside the back box is between the studs attached to the inside of the lower dome. b. Install the V-band around the lower dome and then tighten the fastener of the V-band. c. Test the operation of the uni...
C3422M-B (3/08) 7 Site Installation 1. Feed a fiber optic cable (not supplied) and the supplied wiring harness into the front of the mount and out the back of the mount. Connect the wires as required. Refer to Table B, Table C, and Table D on page 10, and Table E on page 11 for cable and wiring info...
