Patton IM1/I4 - Manual
Patton IM1/I4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The Model IM1/I4 generates and uses radio frequency energy, and
- Page 3 – LAN; Figure 1. Typical Model IM1/I4 application
- Page 4 – PPP OPERATIONAL BACKGROUND; Ethernet LAN
- Page 5 – Internal Clock Setting
- Page 6 – Installing the New QuickConnectTM Module; even pressure should be sufficient to seat the mod-; CONNECTING TO THE 10BASE-T ETHERNET PORT; Figure 5. 10BaseT RJ-45 Port Pin Description
- Page 7 – Once the Model IM1/14 is installed, it should operate transparent-; OPERATING INSTRUCTIONS; In order to operate, the Model IM1/I4 must be installed in the base; The Model IM1/I4 interface card has been
- Page 8 – LED STATUS MONITORS; The Model IM1/I4 features two LEDs that monitor general operat-; Figure 6. Model IM1/I4 Panel Showing RJ45 Jacks and LEDs; SYS; Quick-Connect Interface Module
- Page 9 – Patton Electronics Company
USER
MANUAL
MODEL IM1/I4
Ethernet Bridge with
Integral 4-Port Hub
QuikConnect™ Module
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com
Part# 07MIM1/I4-C
Doc# 090141UC
Revised 07/19/00
C E R T I F I E D
An ISO-9001
Certified Company
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1.3 SERVICE All warranty and nonwarranty repairs must be returned freight pre- paid and insured to Patton Electronics. All returns must have a ReturnMaterials Authorization number on the outside of the shipping contain-er. This number may be obtained from Patton Electronics TechnicalSupport at: (301...
2.3 TYPICAL APPLICATION The Model IM1/I4 QuickConnect™ is designed to plug directly into the rear of a Patton Electronics baseband modem (e.g. Model1092A or 1095). The Model IM1/I4 is designed to be used as one of apair of units. Figure 1 (below) illustrates a typical Model IM1/I4 instal-lation. 22....
3.0 PPP OPERATIONAL BACKGROUND PPP is a protocol used for multi-plexed transport over a point- to-point link. PPP operates on all full duplex media, and is a sym-metric peer-to-peer protocol, which can be broken into three maincomponents: 1. A standard method to encapsulate datagrams overserial link...
