Patton SmartNode 4300 - Manuals

Page 3 - Safety when working with electricity; Limited Power Source; WARNING

Safety when working with electricity 3 SmartNode 4300 Quick Start Guide Safety when working with electricity • Do not open the device when the power cord is connected. For systems without a power switch and without an external power adapter, line volt-ages are present within the device when the powe...

Page 4 - General observations; Airflow requirements; when you are installing your unit:; Note

Safety when working with electricity 4 SmartNode 4300 Quick Start Guide General observations • Clean the case with a soft slightly moist anti-static cloth • Place the unit on a flat surface and ensure free air circulation • Avoid exposing the unit to direct sunlight and other heat sources • Protect ...

Page 5 - Introduction; SmartWare; Attaching the cable retainer clip; Figure 1. Attaching the cable retainer clip; SmartNode 4300 User Manual; Power cable

Introduction 5 SmartNode 4300 Quick Start Guide Introduction This Quick Start Guide leads you through the basic steps to set up a new SmartNode and to download a con-figuration. Please note that this guide does not replace the detailed SmartWare Software Configuration Guide and the SmartNode 4300 Us...

Page 6 - Connecting a PC, logging in, and configuring the IP address; Connecting power and configuring the default IP address; Figure 2. Connecting to the PC; Enter; enable; Item; DHCP

Connecting a PC, logging in, and configuring the IP address 6 SmartNode 4300 Quick Start Guide Connecting a PC, logging in, and configuring the IP address Connecting power and configuring the default IP address Connect the SmartNode to the mains power supply using the included power supply and cable...

Page 7 - Changing the IP address; Set the IP address and network mask for the each IP interface (; For the examples in this guide, a private network (; Go to section

Connecting a PC, logging in, and configuring the IP address 7 SmartNode 4300 Quick Start Guide 172.16.40.1> enable 172.16.40.1# configure 172.16.40.1(cfg)# Changing the IP address 1. Select the context IP mode to configure an IP interface. 172.16.40.1(cfg)# context ip router 172.16.40.1(ctx-ip)[r...

Page 8 - Connecting the SmartNode to the network; figure 3; Figure 3. Connecting the SmartNode to the network; Respectively from the host:; “Downloading a configuration example, adapting it to

Connecting the SmartNode to the network 8 SmartNode 4300 Quick Start Guide Connecting the SmartNode to the network The 4300 Ethernet port is auto MDX, therefore a straight-through wired cable can be used for host and switch connections (see figure 3 ). Figure 3. Connecting the SmartNode to the netwo...

Page 9 - SmartNode 4300 Quick Start Guide; Additional information; When you issue the; reload; command, the SmartNode will ask; IMPORTANT

Downloading a configuration example, adapting it to your network, and loading it onto the SmartNode 9 SmartNode 4300 Quick Start Guide Downloading a configuration example, adapting it to your network, and loading it onto the SmartNode Patton provides a collection of configuration templates on the su...

Page 10 - Compliance

Compliance 10 SmartNode 4300 Quick Start Guide Compliance EMC compliance: • FCC Part 15, Class A • EN55022, Class A • EN55024 Low Voltage Directive (Safety): • UL60950-1/CSA C22.2 No. 60950-1Listing • IEC/EN 60950-1, 2nd edition • AS/NZS 60950-1, A-tick PSTN: • ACMA AS/ACIF S003:2008 • PTC 220

Page 11 - CE Declaration of Conformity

Radio and TV Interference (FCC Part 15) 11 SmartNode 4300 Quick Start Guide Radio and TV Interference (FCC Part 15) This device generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference ...

Page 12 - NOTES