Patton 9130 - Manual
Patton 9130 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OnSite Expansion Modules Quick Start Guide; on page 2; Unpacking and Installation; OnSite Series Administrator’s Reference; Figure 1; Installing the HD-E1 module; Read the safety information in the OnSite Series; User Manual; and; Administrator’s Reference Guide; thoroughly before installing and operat-; WARNING
- Page 3 – Cable Management; Note; Figure 2; Cable dressing for the HD-E1 module; CAUTION
- Page 4 – Unpacking and Installation; Figure 3; slots of a modular OS-10 Series platform.; Installing the DS3/E3 module
- Page 5 – Unpacking and Installation
- Page 6 – Module Type; Optical
- Page 7 – Unpacking and Installation; OnSite Series Administrator’s Ref-; Installing the 2-port STM-1 optical interface module
- Page 8 – Additional Information; For detailed instructions, refer to the; A.0 Customer and Technical Support; —answered within 1 business day; Copyright statement
OnSite Models 9100, 9130, 9200 & 9300
Expansion Modules
Quick Start Guide
Part Number: 07M9000-QS, Rev. B
Revised: February 20, 2012
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 OnSite Expansion Modules Quick Start Guide 1.0 Introduction This guide provides instructions for adding expansion modules to your Patton OnSite base system. Refer to the following sections for installation instructions for your specific module: • 2.0 “Model 9100 E1 Module” on page 2 • 3.0 “Model 9...
OnSite Expansion Modules Quick Start Guide 3 2.2 Cable Management The HD-E1 module uses a future bus connector on the front panel and requires the use of cables with compatible plugs for access to the E1 signals. These cables are ordered separately from the module and need to be specified according ...
4 OnSite Expansion Modules Quick Start Guide 2.3 Getting Started After the module is securely installed to the chassis (using the mounted screws on the front panel), turn the power back on to the S1000 system. The STAT LED of the HD-E1 module turns on to a solid amber light for about ten seconds aft...
