Patton 3088A - Manual
Patton 3088A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 3 – Model 3088A Series Quick Start Guide; Select configuration method; Plug ‘n’ Play; Software Configuration; OnSite Model 3088A Series Getting Started Guide.; Power up the CPE; External AC adaptor with detachable power cord; Models with external AC adaptor; Connect female plug of the AC power cord to the AC adaptor provided.; Models with external DC power supply; DC Power Supply
- Page 4 – Power up indication; Power; figure 2; Connect the serial port
- Page 5 – Connect the serial cable to the OnSite serial port as follows:; Additional information; Series Getting Started Guide; A.0 Compliance Information
- Page 6 – Industry Canada Notice; The signed Declaration of Conformity can be downloaded from; A.4 “EC Declaration of Conformity”; for English version); Produktbezeichnung; Anerkennung ihrer Konformität.
- Page 7 – A.6 Authorized European Representative; OnSite; Patton support headquarters in the USA; Note; OnSite 3088A Getting Started Guide
- Page 8 – For warranty, trademark and compliance information, refer to the
OnSite™ Model 3088A Series
G.SHDSL.bis CPE with Fixed
Serial Interfaces
Quick Start Guide
Important
—This is a Class A device and is intended for use in a light industrial environment. It is not
intended nor approved for use in an industrial or residential environment.
REGULATORY MODEL NUMBER
: 03340D4-001
Part Number: 07M3088A-QS, Rev. A
Revised: February 2, 2012
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Model 3088A Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter, th...
Model 3088A Series Quick Start Guide 3 1.0 Select configuration method Before powering up, you must select one of the following methods for configuring your OnSite: • Plug ‘n’ Play —The OnSite comes factory-configured for Plug ’n’ Play configuration when connected to a service-provider network. • DI...
4 Model 3088A Series Quick Start Guide Figure 2. Model 3088A/CA front panel 2.3 Power up indication Verify that the Power LED (see figure 2 ) illuminates and remains lit. 3.0 Connect the G.SHDSL port 1. Obtain single-twisted-pair cable with an RJ-45 plug connector at each end. 2. Plug one end of the...
