Patton 3088A - Manuals - manualsarea.com

Page 2 - WARNING

2 Model 3088A Series Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter, th...

Page 3 - Model 3088A Series Quick Start Guide; Select configuration method; Plug ‘n’ Play; Software Configuration; OnSite Model 3088A Series Getting Started Guide.; Power up the CPE; External AC adaptor with detachable power cord; Models with external AC adaptor; Connect female plug of the AC power cord to the AC adaptor provided.; Models with external DC power supply; DC Power Supply

Model 3088A Series Quick Start Guide 3 1.0 Select configuration method Before powering up, you must select one of the following methods for configuring your OnSite: • Plug ‘n’ Play —The OnSite comes factory-configured for Plug ’n’ Play configuration when connected to a service-provider network. • DI...

Page 4 - Power up indication; Power; figure 2; Connect the serial port

4 Model 3088A Series Quick Start Guide Figure 2. Model 3088A/CA front panel 2.3 Power up indication Verify that the Power LED (see figure 2 ) illuminates and remains lit. 3.0 Connect the G.SHDSL port 1. Obtain single-twisted-pair cable with an RJ-45 plug connector at each end. 2. Plug one end of the...

Page 5 - Connect the serial cable to the OnSite serial port as follows:; Additional information; Series Getting Started Guide; A.0 Compliance Information

Model 3088A Series Quick Start Guide 5 Connect the serial cable to the OnSite serial port as follows: 1. Attach the male connector of the serial cable to the female serial connector on the OnSite. 2. Attach the other end of the cable to the serial connector on the local serial CPE. Note You can conn...

Page 6 - Industry Canada Notice; The signed Declaration of Conformity can be downloaded from; A.4 “EC Declaration of Conformity”; for English version); Produktbezeichnung; Anerkennung ihrer Konformität.

6 Model 3088A Series Quick Start Guide 1.3 Industry Canada Notice This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is con-firmed by the registration number. The abbreviation, IC, before the registration number signifies that registra-tion was perf...

Page 7 - A.6 Authorized European Representative; OnSite; Patton support headquarters in the USA; Note; OnSite 3088A Getting Started Guide

Model 3088A Series Quick Start Guide 7 Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/ certifications/. A.6 Authorized European Representative D R M GreenEuropean Compliance Services Limited.Oakdene House, Oak Road Watchfield,Swindon, Wilts SN6 8TD, UK Copyr...

Page 8 - For warranty, trademark and compliance information, refer to the

8 Model 3088A Series Quick Start Guide Warranty, Trademark, & Compliance Information For warranty, trademark and compliance information, refer to the OnSite 3088A Getting Started Guide available online at www.patton.com/manuals/3088A.pdf .