Patton 07MSN5200-QS - Manual
Patton 07MSN5200-QS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 3 – SmartNode 5200 Quick Start Guide; Power up the SmartNode; When the; Set your PC to DHCP; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION
- Page 4 – figure 1; Displaying the Network Connections window; Properties
- Page 5 – Power; figure 3; Connecting the SmartNode to your laptop PC; Straight-through wired cable
- Page 6 – Configuring the desired IP address; “Connecting the SmartNode to the; enable; Changing the WAN IP address; IP Address; DHCP
- Page 7 – The SmartNode can now be connected to your network.; In general, the SmartNode will connect to the network via the; figure 4; Connecting the SmartNode to the network; Note; If the WAN address is
- Page 8 – —one of which may be similar enough to your; so if; SmartNode Series SmartWare Software Configuration Guide; in the root directory of the TFTP server.; Additional information; SN5200 Getting Started Guide; . Otherwise, the downloaded configuration will be; IMPORTANT
- Page 9 – A.0 Customer and Technical Support; with a VoIP SIP client; A.0 Appendix—Factor y default IP addresses; Factory default IP addresses and netmask configuration.
- Page 10 – B.0 Compliance Information; B.2 CE Declaration of Conformity
- Page 11 – Copyright statement; The term
- Page 12 – NOTES
SmartNode™ Model 5200
Enterprise Session Border Router
Quick Start Guide
Important
—
This is a Class A device and is intended for use in a light industrial (commer-
cial) environment only. It is not intended nor approved for use in a heavy industrial or resi-
dential environment.
This device is approved for connection to the public ISDN telecommunication network, over BRI/S0-
ISDN interfaces.
Part Number: 07MSN5200-QS, Rev. A
Revised: April 21, 2010
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SmartNode 5200 Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter, the po...
SmartNode 5200 Quick Start Guide 3 1.0 Power up the SmartNode 1. Connect the SmartNode to a power source using the included power supply and cable. 2. When the Power LED stops blinking and remains lit, the SmartNode is ready to configure. 2.0 Set your PC to DHCP This guide will allow you to quickly ...
4 SmartNode 5200 Quick Start Guide 1. Right-click on My Network Places and select Properties in the context menu (see figure 1 ). Figure 1. Displaying the Network Connections window Figure 2. Displaying the Internet Properties (TCP/IP) Properties window 2. Double-click on Local Area Connection and c...
