Patton 07MSN5200-QS - Manuals

Page 2 - WARNING

2 SmartNode 5200 Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter, the po...

Page 3 - SmartNode 5200 Quick Start Guide; Power up the SmartNode; When the; Set your PC to DHCP; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION

SmartNode 5200 Quick Start Guide 3 1.0 Power up the SmartNode 1. Connect the SmartNode to a power source using the included power supply and cable. 2. When the Power LED stops blinking and remains lit, the SmartNode is ready to configure. 2.0 Set your PC to DHCP This guide will allow you to quickly ...

Page 4 - figure 1; Displaying the Network Connections window; Properties

4 SmartNode 5200 Quick Start Guide 1. Right-click on My Network Places and select Properties in the context menu (see figure 1 ). Figure 1. Displaying the Network Connections window Figure 2. Displaying the Internet Properties (TCP/IP) Properties window 2. Double-click on Local Area Connection and c...

Page 5 - Power; figure 3; Connecting the SmartNode to your laptop PC; Straight-through wired cable

SmartNode 5200 Quick Start Guide 5 3.0 Connecting the SmartNode to your laptop PC First the SmartNode must be connected to the mains power supply with the power cable. Wait until the Power LED stops blinking and stays lit constantly. Now the SmartNode is ready. The SmartNode 5200 Series is equipped ...

Page 6 - Configuring the desired IP address; “Connecting the SmartNode to the; enable; Changing the WAN IP address; IP Address; DHCP

6 SmartNode 5200 Quick Start Guide 4.0 Configuring the desired IP address 4.1 Factory-default IP settings The factory default configuration for the Ethernet interface IP addresses and network masks are listed in the table below. Both Ethernet interfaces are activated upon power-up. LAN interface ETH...

Page 7 - The SmartNode can now be connected to your network.; In general, the SmartNode will connect to the network via the; figure 4; Connecting the SmartNode to the network; Note; If the WAN address is

SmartNode 5200 Quick Start Guide 7 Copy this modified configuration to your new start-up configuration. This will store your changes in non-volatile memory. Upon the next start-up the system will initialize itself using the modified configuration. 172.16.1.99(if-ip)[eth0]# copy running-config startu...

Page 8 - —one of which may be similar enough to your; so if; SmartNode Series SmartWare Software Configuration Guide; in the root directory of the TFTP server.; Additional information; SN5200 Getting Started Guide; . Otherwise, the downloaded configuration will be; IMPORTANT

8 SmartNode 5200 Quick Start Guide 6.0 Loading the configuration (optional) Patton provides a collection of configuration templates on the CD-ROM that came with the SmartNode device—and also on the support page at www.patton.com/voip —one of which may be similar enough to your application that you c...

Page 9 - A.0 Customer and Technical Support; with a VoIP SIP client; A.0 Appendix—Factor y default IP addresses; Factory default IP addresses and netmask configuration.

SmartNode 5200 Quick Start Guide 9 A.0 Customer and Technical Support If you contact Patton support, you should have some system information ready to help us better help you. This information allows us to quickly identify what product you are using and how it is configured. Therefore, we inte-grated...

Page 10 - B.0 Compliance Information; B.2 CE Declaration of Conformity

10 SmartNode 5200 Quick Start Guide B.0 Compliance Information B.1 Compliance EMC Compliance: • EN55022, Class A • EN55024 Low-Voltage Directive (Safety Compliance): • IEC/EN60950-1, 2nd edition • AS/NZS60950-1 PSTN: • TBR3:1995 A1 • AS/ACIF SO31:2001 B.2 CE Declaration of Conformity This device con...

Page 11 - Copyright statement; The term

SmartNode 5200 Quick Start Guide 11 Copyright statement Copyright © 2010, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement Th...

Page 12 - NOTES

12 SmartNode 5200 Quick Start Guide NOTES ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________________________________________...